著者
菅野 利猛
出版者
Japan Foundry Engineering Society
雑誌
鋳造工学 (ISSN:13420429)
巻号頁・発行日
vol.78, no.1, pp.23-29, 2006-01-25 (Released:2012-12-25)
参考文献数
16

Nirayama reverberatory furnace is located at lzunokuni-city of lzu-Peninsula, Shizuoka-Prefecture. Hagi reverberatory furnace exists at Hagi-city, Yamaguchi-Prefecture, but Nirayama's one is the only one architectures that could make cast iron cannon. There are still remained some unknown matters as follows ; (1) whether cast iron was really melted or not, (2) what kind of pig-iron was used, (3) whether blowing of bellows were utilized or not, (4) what kind of fuels were used, (5) where firebricks were made, etc. On this Nirayama reverberatory furnace, the possibility of casting of cannon with iron was investigated, with melting experiment from a foundry engineering standpoint.   The followings are presumed from the investigation. Firstly, at least three cannons of cast iron were manufactured. Secondly, high Silicon contained pig-iron could not be available, so casting of iron cannon was not well done. Finally, the melting time by reverberatory furnace, from preheating to pouring completion, was about eight hours and melting temperature was above 1623K.

言及状況

外部データベース (DOI)

Twitter (2 users, 3 posts, 1 favorites)

#鉄腕DASH  この先生 @ https://t.co/YKg64pX722 https://t.co/jPwjkA57BS
前にも書いたけど反射炉に付いて映像だけでなくペーパーとして残しておくべきと思う。鋳造学会で発表して欲しい。「韮山反射炉における鋳鉄製大砲鋳造の可能性」 https://t.co/1yOiOMOlFS のペーパーが出ているので実際に… https://t.co/k4D3yYIVUI
TOKIOの反射炉、あれ鋳鉄技術なんですよね。[韮山反射炉における鋳鉄製大砲鋳造の可能性] https://t.co/efuyhRUkWt どこまでできるんでしょうね。

収集済み URL リスト