著者

追沼 龍三 中川 智 荻田 哲也

出版者

The Textile Machinery Society of Japan

雑誌

繊維機械学会誌 (ISSN:03710580)

巻号頁・発行日

vol.42, no.10, pp.P549-P555, 1989-10-25 (Released:2009-10-27)

参考文献数

11

---

The effect of some knitting factors such as the machine gauge, the depth of stitch draw, the input tension, and the take-down weight on the end breakage rates in plain-weft knitting zone due to yarn joints (airsplices, weavers knots and fisherman's knots) is investigated experimentally, using a cotton yarn (30s/1).The results obtained are as follows : (1) The knitting defect due to airsplices is hardly occurred for every knitting condition. Airsplice is a very usefull yarn joint on weft knitting.(2) The knitting defect due to weavers knots or fisherman's knots almost causes knitting holes by end breakages in a plain-weft knitting zone. The end breakage occurs near the knot on the take-down side.(3) The end breakage rate in a plain-weft knitting zone due to weavers knots or fisherman's knots increases together with the increase of the machine gauge, the depth of stitch draw, the input tension, and the take-down weight.(4) For every knitting condition, the end breakage rate in plain-weft knitting zone due to fisherman's knots is more than that due to weavers knots.