著者

井上廉平 輯

出版者

大野木市兵衛

巻号頁・発行日

1872

著者

井上 廉

出版者

CRYOGENICS AND SUPERCONDUCTIVITY SOCIETY OF JAPAN

雑誌

低温工学 (ISSN:03892441)

巻号頁・発行日

vol.30, no.8, pp.369-376, 1995-08-25 (Released:2010-02-26)

参考文献数

12

---

The hybrid magnet, which is a large system composed of an inner water-cooled magnet and an outer superconducting magnet, is well known to be the most suitable for generating steady high-magnetic fields. Thirty T-class hybrid magnets are being operated at several high-magnetic field laboratories, The world's highest steady field at present is 35.2T. Projects to enhance the steady fields up to 40-45T are progressing now at the National Research Institute for Metal, Japan, and the National High Magnetic Field Laboratory, USA. In particular, the NRIM project is just now nearing the final stage. In this article, I review in detail the hybrid magnet technology including those of superconducting magnet and water-cooled magnet, the present status of hybrid magnet systems in operation, and the developing projects at NRIM.

著者

井上 廉 坂井 義和 浅野 稔久 前田 弘

出版者

CRYOGENICS AND SUPERCONDUCTIVITY SOCIETY OF JAPAN

雑誌

低温工学 (ISSN:03892441)

巻号頁・発行日

vol.30, no.4, pp.163-170, 1995-04-25 (Released:2010-02-26)

参考文献数

14

被引用文献数

2 2

---

Recently, we successfully developed a new Cu-Ag microcomposite alloy with a promising combination of high mechanical strength and high electrical conductivity. When a Cu-16 at% Ag alloy ingot was cold-worked into a wire or a sheet with several times of intermediate annealing at 350-450°C, it shows high conductivity of 75-83% IACS and a high tensile strength of 0.7-1.1GPa at room temperature. These values are superior to those of Cu-Nb microcomposite alloy. The Cu-Ag microcomposite alloy shows excellent mechanical strength with cold work of over 93% areal reduction ratio, while a very heavy cold work of more than 99.97% areal reduction ratio is necessary for realizing such mechanical strength in the Cu-Nb microcomposite. A further advantage of the Cu-Ag microcomposite is easy casting of the alloy ingot, resulting in excellent homogeneity of the microstructure and, therefore, the properties in the alloy wire and sheet. We wound the Cu-Ag microcomposite alloy wire into several pulsed magnets. One of them generated non-destructively 73.4T with duration time of 5msec in a 10mm bore. An other one generated non-destructively 65.3T with duration time of 100msec in a 16mm bore. The feasibility study of the Cu-Ag microcomposite alloy sheet as Bitter magnet sheets is progressing now in collaboration with the Francis Bitter National Magnet Laboratory and the National High Magnetic Field Laboratory. A steady field of 35.2T could be generated by inserting the Cu-Ag microcomposite alloy Bitter sheets into the highest-field region in Hybrid III of FBNML. These pulsed fields and the steady one are world records as of this writing.

著者

井上 廉

出版者

CRYOGENICS AND SUPERCONDUCTIVITY SOCIETY OF JAPAN

雑誌

低温工学 (ISSN:03892441)

巻号頁・発行日

vol.30, no.8, pp.369-376, 1995

---

The hybrid magnet, which is a large system composed of an inner water-cooled magnet and an outer superconducting magnet, is well known to be the most suitable for generating steady high-magnetic fields. Thirty T-class hybrid magnets are being operated at several high-magnetic field laboratories, The world's highest steady field at present is 35.2T. Projects to enhance the steady fields up to 40-45T are progressing now at the National Research Institute for Metal, Japan, and the National High Magnetic Field Laboratory, USA. In particular, the NRIM project is just now nearing the final stage. In this article, I review in detail the hybrid magnet technology including those of superconducting magnet and water-cooled magnet, the present status of hybrid magnet systems in operation, and the developing projects at NRIM.