著者

村上 敬宜 堤 一也 藤嶋 正博

出版者

一般社団法人日本機械学会

雑誌

日本機械学会論文集. A編 (ISSN:03875008)

巻号頁・発行日

vol.62, no.597, pp.1124-1131, 1996-05-25

被引用文献数

15 19

---

In order to investigate the effect of surface roughness on the fatigue strength, fatigue tests for maraging steel which was subjected to aging treatment and was free of residual stress, were carried out. As an artificial surface roughness, extremely shallow periodical notches with notch radii P=0 and 200μm, and notch depths a=12, 22, 40 and 65μm were introduced. In addition to the effect of surface roughness, the effect of nonmetallic inclusions was also considered. The equivalent defect size (√(area<SUB>R</SUB>)) which controls the fatigue limit of specimen containing the surface roughness is defined by the function of depth and Pitch of the roughness. The lower bound of the fatigue limit for various levels of roughness can be predicted by substituting the equivalent maximum defect size (√(area<SUB>m</SUB>axt)) to the √(area) parameter model. The value of √(area<SUB>m</SUB>axt) can be evaluated by considering the interaction effect between the maximum inclusion size and roughness. The predicted values were examined by experiments and it is shown that the method of prediction is available for practical applications.