著者

沢 俊行 天摩 勝洋 西ヶ谷 達 仲野 雄一

出版者

一般社団法人日本機械学会

雑誌

日本機械学會論文集. A編 (ISSN:03875008)

巻号頁・発行日

vol.59, no.563, pp.1763-1770, 1993-07-25

---

The stress of band adhesive butt joints in which the interfaces are partially bonded, was analyzed using a two-dimensional, theory of elasticity in order to establish fracture criteria for the case in which the joints of dissimilar adherends are subjected to tensile loads. In the analysis, when the interfaces are bonded by an adhesive at two regions, the dissimilar adherends and the adhesive are replaced with finite strips. In the numerical calculations, the effects of the ratio of Young's modulus of adherends to that of adhesives, the thickness of the adhesives, the bonding area and position and load distributions on the stress distributions at the interfaces were demonstrated. In addition, with use of the stress distribution, a method for evaluating joint strength was proposed. As a result, it was observed that band adhesive joints were available when the bonding area and positions were varied taking into account external load distribution. For verification, experiments were performed on the strain of adherends and the joint strength. Analytical results were consistent with the experimental ones.