著者
杉岡 奈穂子 北田 正弘 西嶋 雅彦
出版者
公益社団法人 日本金属学会
雑誌
日本金属学会誌 (ISSN:00214876)
巻号頁・発行日
vol.77, no.5, pp.185-191, 2013 (Released:2013-05-01)
参考文献数
15
被引用文献数
2

The metallurgical microstructure and mechanical properties of the spear blade manufactured in the Edo period have been investigated. The purpose of this work is to obtain metallographic data of the spear blade, and to clarify the manufacturing technique of the spear blade. The specimen examined was estimated to have been made from the end of the Muromachi period to the Edo period and has the signature of Shinano-no-Kami Minamoto Takamichi. The spear is 31 cm in length and 10.7 mm in maximum width. The metallurgical microstructure and nonmetallic inclusions of the spear blade are observed using an optical microscope. The carbon concentration is determined by chemical analysis. To evaluate the hardness, micro Vickers hardness (Hmv) is used. The microstructure is observed using an optical microscope and a scanning electron microscope (SEM). The concentration of nonmetallic inclusions is obtained by electron dispersive X-ray analysis (EDS).    A cross-sectional image of the spear after chemical etching shows a metal flow pattern formed by deformation, possibly created by hammering. The striped structure of layers of two types of steel containing different carbon contents stacked on top of each other was observed. The bright areas after etching corresponded to the edges and ridges of the spear, which were cooled rapidly, forming the martensite structure. The other dark areas consist of pearlite and α-Fe (ferrite) grains. Optical micrographs of near-edge areas contain pearlite and martensite grains, and core areas contain pearlite and α-Fe grains. The nonmetallic inclusions in the core steel consist of a few metal oxide particles and a glass matrix. There are Fe-Ti oxide grains in the glass matrix, and an unknown oxide particle adhering on the Fe-Ti oxide grain surface was also observed.
著者
杉岡 奈穂子 北田 正弘 西嶋 雅彦
出版者
公益社団法人 日本金属学会
雑誌
日本金屬學會誌 (ISSN:00214876)
巻号頁・発行日
vol.77, no.5, pp.185-191, 2013-05-01
参考文献数
15
被引用文献数
2

&nbsp;&nbsp;The metallurgical microstructure and mechanical properties of the spear blade manufactured in the Edo period have been investigated. The purpose of this work is to obtain metallographic data of the spear blade, and to clarify the manufacturing technique of the spear blade. The specimen examined was estimated to have been made from the end of the Muromachi period to the Edo period and has the signature of <i>Shinano-no-Kami Minamoto Takamichi</i>. The spear is 31 cm in length and 10.7 mm in maximum width. The metallurgical microstructure and nonmetallic inclusions of the spear blade are observed using an optical microscope. The carbon concentration is determined by chemical analysis. To evaluate the hardness, micro Vickers hardness (<i>H</i><sub>mv</sub>) is used. The microstructure is observed using an optical microscope and a scanning electron microscope (SEM). The concentration of nonmetallic inclusions is obtained by electron dispersive X-ray analysis (EDS).<br> &nbsp;&nbsp; A cross-sectional image of the spear after chemical etching shows a metal flow pattern formed by deformation, possibly created by hammering. The striped structure of layers of two types of steel containing different carbon contents stacked on top of each other was observed. The bright areas after etching corresponded to the edges and ridges of the spear, which were cooled rapidly, forming the martensite structure. The other dark areas consist of pearlite and &alpha;-Fe (ferrite) grains. Optical micrographs of near-edge areas contain pearlite and martensite grains, and core areas contain pearlite and &alpha;-Fe grains. The nonmetallic inclusions in the core steel consist of a few metal oxide particles and a glass matrix. There are Fe-Ti oxide grains in the glass matrix, and an unknown oxide particle adhering on the Fe-Ti oxide grain surface was also observed.<br>