- 著者
-
秋庭 義明
田中 啓介
村雨 勇治
- 出版者
- 一般社団法人日本機械学会
- 雑誌
- 年次大会講演論文集 : JSME annual meeting
- 巻号頁・発行日
- vol.2003, no.1, pp.135-136, 2003-08-05
A bearing steel (JIS SUJ2) and nickel chromium molybden steel (SNCM439) were fatigued with the ultrasonic fatigue-testing machine (20kHz) in laboratory air. In the very long-life regime, the decline of fatigue limit was seen. The origins of crack initiation were mostly internal inclusions. However, even when the specimen broke in a long life region, some cracks were initiated from specimen surface. Fracture surface were observed with a scanning electron microscope (SEM). The fish-eyes were observed in the specimens broken from the internal inclusions. The fracture surface could be divided into three regions. The first region surrounding inclusion was a facet area. The crack propagation in the facet region was Stage A and the crack propagation outside the facet region was Stage B. When the fatigue cracks reached the specimen surface, the fatigue cracks propagated as surface cracks. The crack propagation rate in each region was estimated to be a power function of the stress intensity range. Fatigue life was calculated by integrating with the crack propagation laws determined from the data obtained for the rotating bending. The predicted fatigue life agrees with the experimental result.