著者

植松 美彦 戸梶 惠郎 戸崎 康成 柴田 英明

出版者

一般社団法人 溶接学会

雑誌

溶接学会論文集 (ISSN:02884771)

巻号頁・発行日

vol.27, no.4, pp.261-269, 2009 (Released:2009-10-23)

参考文献数

16

被引用文献数

4 7

---

Fatigue tests were conducted under fully reversed axial loading (R = -1) in laboratory air and 3% NaCl solution using friction stir welded (FSW) joints of 7075-T6 aluminium alloy sheets. The FSW joint exhibited lower tensile strength than the parent metal. Heat input during FSW process re-dissolved strengthening precipitates, resulting in softening in the weld zone and lower tensile strength. In laboratory air, the fatigue strength of the FSW joint was comparable to that of the parent metal, which could be attributed to grain refinement in the stir zone (SZ) and dynamic aging during fatigue loading in the softened weld zone. In 3% NaCl solution, the fatigue strength of the FSW joint was lower than that of the parent metal. Corrosion pits were preferentially formed at the boundary between thermo-mechanically affected zone (TMAZ) and heat affected zone (HAZ), which led to premature crack initiation in the FSW joint. Such predominant formation of corrosion pits was due to the sensitization caused by heat history during FSW process.