著者
柏村 孝義 白鳥 正樹 于 強 国府田 勲
出版者
一般社団法人日本機械学会
雑誌
日本機械学會論文集. A編 (ISSN:03875008)
巻号頁・発行日
vol.62, no.601, pp.2180-2185, 1996-09-25
被引用文献数
23 10

The authors proposed a new practical optimum design method that consists of two steps: the design of experiments and mathematical programming. The design of experiments is used to generate approximate evaluation functions for the controlling behavior depending on the changes in design variables of an object structure, by a series of finite element analyses (FEA). Based upon an orthogonal array of a combination of design variables, effects of the design variables can be calculated by a relatively small number of FEA, and then the approximate evaluation functions are generated by those effects based upon analysis of variance. The evaluation functions can also be used as direct tools for estimating the behavior of design structure. Finally, a successive quadratic programming (SQP) method is employed to solve the optimization problem of the approximate evaluation functions. It is confirmed that the proposed method can be used for almost all kinds of the nonlinear problems including the impact behavior of structures, and that it can be carried out in much smaller number of FEA than the other existing methods. As an example, the present method was used to solve an optimum design problem of an automobile seat frame subjected to impact loading. It was found that the present method is a very effective and powerful tool for the optimum design of various practical design problems.現在提案されている最適化設計のシステムの多くは複雑,効率が悪いという問題を持っている.本論文では,実験計画法,構造解析および数理計画法を組み合わせた実用的で効率の良い最適化方法を提案する.
著者
三好 俊郎 白鳥 正樹
出版者
一般社団法人日本機械学会
雑誌
日本機械学會論文集. A編 (ISSN:03875008)
巻号頁・発行日
vol.48, no.433, pp.1136-1141, 1982-09-25
被引用文献数
2 1

3点曲げおよび中央き裂を持つ試験片の有限要素解析を行い,全面降伏荷重およびJ積分の平面ひずみ状態と平面応力状態での比が塑性拘束率βに等しいことを示した.ついですべり線場解析に基づき,3点曲げ,CT,中央き裂および両外側き裂の引張りに対して有限要素解析と同じ結果が導かれることを示した.最後に表面は平面応力,内部は平面ひずみからなる三次元積層板モデルを提案し,J積分評価の際の板厚効果について考察した.
著者
柏村 孝義 森 孝男 白鳥 正樹 于 強 丸山 修
出版者
一般社団法人日本機械学会
雑誌
日本機械学會論文集. A編 (ISSN:03875008)
巻号頁・発行日
vol.62, no.603, pp.2422-2427, 1996-11-25
被引用文献数
14 2

The authors proposed a new practical optimum design method (=statistical optimization method) that consists of two steps of an effectivity analysis (using a combination of the design of experiments and the structural analysis) and mathematical programming. The design of experiments is used to generate the approximate evaluation functions for the controlling behavior depending on the changes of design variables of the object structure, using finite element analysis (FEA). The evaluation functions can also be used as tools for directly estimating the behavior of the designed structure. A successive quadratic programming (SQP) method is employed to solve the optimization problem of the approximate evaluation functions. It is confirmed that the proposed method call be used in solving various problems. In this study, the authors applied the present method to the optimum design of a frame column subjected to axial crushing. This study deals with many complex behaviors such as large deformation, contact and material nonlinearities as well as impact behavior. However, this problem has been solved easily using the present method, and satisfactory results of the effectivity analysis and optimum design are obtained.統計的最適化手法を用いて,複雑な非線形現象である動的圧潰現象における最適化および影響度解析を行った.応答曲面を用いた本手法では,複雑な非線形挙動を再現する高精度な推定式を得ることができるとともに最適化計算においても高い精度を有することが確認できた.