著者
Junko Matsuki Masahisa Wada Tomoko Sasaki Koichi Yoza Ken Tokuyasu
出版者
The Japanese Society of Applied Glycoscience
雑誌
Journal of Applied Glycoscience (ISSN:13447882)
巻号頁・発行日
vol.66, no.3, pp.97-102, 2019-08-20 (Released:2019-08-28)
参考文献数
28
被引用文献数
2

Ethanol precipitation process for purification of branched dextrin (BD) in Nägeli amylodextrin from waxy rice starch was developed. Temperature and ethanol concentration for precipitation were main parameters affecting the recovery and purity of BD, and the purification condition at 4 °C and 10 % (v/v) ethanol in water was adopted. After four-time precipitation, the BD recovery was 34.6 %, whereas the purity improved from 78.5 % at the initial to 94.5 % at the four-time purified BD (BD4). BD4 mainly showed a chain length distribution between 18 to 35 with a mode length of 25, which shifted after enzymatic debranching with isoamylase to that between 9 and 20 with a mode length of 14. Each purified BD was solubilized in water, and each solution was mixed with methanol-water at 25 °C to a final methanol concentration of 16 M. The flakes of BD precipitated with 16 M methanol exhibited an A-type crystal structure by an X-ray diffraction analysis, and the speed generation of white flakes in 16 M methanol dramatically increased as the purification time increased. The effect of addition of highly branched cyclic dextrin (HBCD) or sodium tetraborate on BD aggregation in 16 M methanol was also investigated, where the former retarded aggregation but the latter had no effect on the velocity. Thus, the purified BD enables rapid characterization of aggregation of double helix structures of A-type crystal structure, and screening of compounds which could affect the phenomena for prediction of potentials in starch modification as well.
著者
Ken Tokuyasu Kenji Yamagishi Junko Matsuki Daisuke Nei Tomoko Sasaki Masakazu Ike
出版者
The Japanese Society of Applied Glycoscience
雑誌
Journal of Applied Glycoscience (ISSN:13447882)
巻号頁・発行日
vol.68, no.4, pp.77-87, 2021-11-20 (Released:2021-11-20)
参考文献数
28
被引用文献数
5

Pulverization is a potentially powerful solution for the resource management of surplus- and non-standard agricultural products, maintaining their nutritional values for long and ensuring their homogeneity, whereas their original textures could disappear to narrow the application ranges. Therefore, new technologies should be developed for reconstructing the powders to provide them with new physical characteristics. Herein, we developed a novel food material, nata puree (NP), by nata de coco (bacterial cellulose gel) disintegration with a water-soluble polysaccharide using a household blender. The process worked well with (1,3)(1,4)-β-glucan (BGL) as the polysaccharide, which could be substituted with barley extract. Lichenase treatment of the NP dramatically modified its physical properties, suggesting the importance of the BGL polymeric forms. NP exhibited distinct potato powder and starch binding activities, which would be attributed to its interactions with the cell wall components and a physical capture of powders by the NP network, respectively. NP supplementation into the potato paste improved its firmness and enabled its printable range shift for 3D food printing to a lower powder-concentration. NP also promoted the dispersion of powders in its suspension, and designed gelation could also be successfully performed by the laser irradiation of an NP suspension containing dispersed curdlan and turmeric powders. Therefore, NP could be applied as a powder modifier to a wide range of products in both conventional cooking, food manufacturing, and next generation processes such as 3D food printing.
著者
Junko Matsuki Tomoko Sasaki Koichi Yoza Junichi Sugiyama Hideo Maeda Ken Tokuyasu
出版者
The Japanese Society of Applied Glycoscience
雑誌
Journal of Applied Glycoscience (ISSN:13447882)
巻号頁・発行日
pp.jag.JAG-2019_0009, (Released:2019-10-24)
被引用文献数
2

Rice-gel prepared by the following three steps: rice grain cooking, shearing of the cooked rice, and cooling for gel formation, is expected as a novel food ingredient for modification of various food products such as bread and noodles. To meet the demand for high-throughput systems for research and developments on the new rice gels, herein we established a mini-cooking system for preparation of rice gel samples from grains using a small-scale viscosity analyzer (Rapid Visco Analyzer; RVA). Polished rice grains (4 g) were cooked with 22 mL of water in a canister, and the paddle equipped in the canister was rotated at 2,000 rpm for 30 min (80 °C was used as a representative) to shear the cooked rice. The sheared paste was cooled to 10 °C at 160 rpm, and the initial gelation property was evaluated by viscosity analysis within the RVA. Alternatively, the sheared paste was transferred to an acrylic mold and kept at 4 °C for 0, 1, 3, and 5 days for determination of the hardness with a compression test. Compressive forces required to penetrate 20 % thickness for three tested rice cultivars were measured, and the trend of the value shifts during preservation is similar to the corresponding trend obtained in 300-g grain scale laboratory tests, whereas the individual values were halved in the former. This small cooking method could offer a useful assay system for a rapid evaluation in the breeding programs and in the high-throughput screening of additives for the modification of properties.
著者
Kaoru KOHYAMA Hiroko SAWADA Miho NONAKA Chiharu KOBORI Fumiyo HAYAKAWA Tomoko SASAKI
出版者
Japan Society for Bioscience, Biotechnology, and Agrochemistry
雑誌
Bioscience, Biotechnology, and Biochemistry (ISSN:09168451)
巻号頁・発行日
vol.71, no.2, pp.358-365, 2007-02-23 (Released:2007-02-23)
参考文献数
35
被引用文献数
56

The difficulty in masticating and swallowing rice cake was quantified. Healthy subjects ate pieces of rice cake (9 g and 3 g) and a modified product (9 g). We used electromyography to measure the activity of the jaw-closing and -opening muscles during chewing, as well as the suprahyoid muscle activity, laryngeal movement, and sound during swallowing. The smaller the rice cake, the shorter the mastication time, the fewer the number of chews, and the less the jaw-closing muscle activity. A modified rice cake product (9 g) was consumed with less mastication effort than the standard rice cake (9 g) and with the same effort as the standard (3 g). Both the sample amount and texture influenced mastication, although neither factor caused a significant difference in swallowing characteristics. These observations suggest that swallowing was induced when the bolus properties became suitable for swallowing, as healthy subjects could adjust their mastication technique according to the food amount and texture.