- 著者
- Yo Akiyama Manabu Kanazawa Maiko Iwaki Tamaki Hada Yumika Soeda Ryosuke Otake Kenta Kashiwazaki Yuriko Komagamine Natsuko Murakami Atsushi Takaichi Noriyuki Wakabayashi Shunsuke Minakuchi
- 出版者
- Japan Prosthodontic Society
- 雑誌
- Journal of Prosthodontic Research (ISSN:18831958)
- 巻号頁・発行日
- pp.JPR_D_22_00100, (Released:2023-02-02)
- 参考文献数
- 17
- 被引用文献数
- 3
Purpose: Although digital removable partial dentures have been previously described, there have been no reports on how to fabricate them in one piece. This study proposes a new method for fabricating patient-specific digital removable partial dentures using a custom plate.Methods: First, a gypsum model was scanned using a laboratory scanner and a removable partial denture was designed using computer-aided design (CAD) software based on standard tessellation language data. The metal clasp was fabricated from Ti-6Al-4V using a 3D printer. For custom plate fabrication, a resin plate frame was designed using computer-aided design (CAD) software and fabricated using a 3D printer. An artificial tooth and metal clasp were fixed on the base surface of the frame, an auto-polymerizing resin was poured into the frame for the denture base, and the artificial tooth and metal clasp were packed to form a custom plate. The plate was cut using a milling machine. Subsequently, the support attached to the denture was removed and polished for complete fabrication of the denture.Conclusions: Our novel removable partial denture fabrication method is more efficient than the conventional method. The obtained removable partial dentures demonstrated satisfactory accuracy.