We describe the effectiveness of feed-forward control using the zero phase error tracking method (ZPET-FF control) of the tracking servo for high-data-transfer-rate optical disk drives, as we are developing an optical disk system to replace the conventional professional videotape recorder for recording high-definition television signals for news gathering or producing broadcast contents. The optical disk system requires a high-data-transfer-rate of more than 200 Mbps and large recording capacity. Therefore, fast and precise track-following control is indispensable. Here, we compare the characteristics of ZPET-FF control with those of conventional feedback control or repetitive control. Experimental results show that ZPET-FF control is more precise than feedback control, and the residual tracking error level is achieved with a tolerance of 10 nm at a linear velocity of 26 m/s in the experimental setup using a blue-violet laser optical head and high-density media. The feasibility of achieving precise ZPET-FF control at 15000 rpm is also presented.