著者
進藤 裕英 高橋 知貴 堀口 勝三 小堀 智之 真田 和昭
出版者
一般社団法人 溶接学会
雑誌
溶接学会論文集 (ISSN:02884771)
巻号頁・発行日
vol.15, no.2, pp.370-375, 1997-05-05 (Released:2009-06-12)
参考文献数
10
被引用文献数
2 1

JJ1 type austenitic stainless steel is emerging as the preferred structural material for superconducting magnet casings to operate at liquid helium temperature (4K). In order to evaluate the cryogenic fracture toughness and the temperature rise of tangsten inertgas (TIG) weld in 200 mm thick forged JJ1 type austenitic stainless steel plate for fusion reactor magnets of the next generation, elastic-plastic fracture toughness (JIC) tests were performed with 1T compact tension specimens at 4K. Testing was conducted in accordance with ASTM standards E813-87 for determining JIC using the unloading compliance technique to monitor crack growth. Au/0.07% Fe -Chromel thermocouples were used to measure the temperature rise near the crack tip. The effects of specimen location and nitrogen content on JIC are examined. Specimens were subjected to scanning electron microscopy (SEM) after fracture testing. The effect of inclusion content on the elastic-plastic fracture toughness parameters (JQ, JIC) is also discussed using optical microscopy and energy dispersive X-ray spectrometer (EDX).
著者
堀口 勝
出版者
東洋大学
雑誌
東洋法学 (ISSN:05640245)
巻号頁・発行日
vol.54, no.1, pp.85-110, 2010-07-30
著者
進藤 裕英 小堀 智之 堀口 勝三 山田 英一 中嶋 秀夫 辻 博史
出版者
公益社団法人 日本金属学会
雑誌
日本金属学会誌 (ISSN:00214876)
巻号頁・発行日
vol.59, no.8, pp.793-798, 1995 (Released:2008-04-04)
参考文献数
12
被引用文献数
2

This paper discusses fracture toughness and temperature rise for JJ1 austenitic stainless steel forged plate at liquid helium temperature for fusion reactor magnets of next generation. Elastic-plastic fracture toughness (JIC) testing was conducted in general accordance with ASTM standards E813-81 and E813-87, and unloading-compliance technique was applied using compact specimens 25.0 mm and 12.5 mm thick. Thermocouples were used to measure the temperature rise near the crack tip. The effects of specimen size and side-groove on the cryogenic fracture properties of this alloy are examined. Examination of the fracture surface of CT specimens by scanning electron microscopy showed ductile failure by microvoid coalescence. The effect of inclusion on fracture mechanics parameters (JQ, JIC) is also discussed using energy dispersive X-ray analyser.