著者

根本 健也 山本 浩 成川 輝真

出版者

一般社団法人 日本機械学会

雑誌

日本機械学会論文集 (ISSN:21879761)

巻号頁・発行日

vol.84, no.862, pp.18-00062, 2018 (Released:2018-06-25)

参考文献数

16

被引用文献数

1

---

One of effective ways to suppress vibration of a mechanical system is using a dynamic vibration absorber. The dynamic vibration absorber consists of a mass, a spring and a damper. The optimal tuning of natural frequency and damping ratio of the dynamic vibration absorber is required to suppress vibration, so adding an adjustable mechanism of stiffness and damping of the dynamic vibration absorber makes tuning easy. This paper proposes a new design concept of an adjustable dynamic vibration absorber consisted of an adjustable mechanism of stiffness and damping. The adjustable mechanism of stiffness consists of an arm, a couple of coil springs and a rotatable spring holder. Stiffness is varied by rotating the spring holder. The adjustable mechanism of stiffness can expand the range of stiffness by increasing spring constant of a couple of coil springs. The adjustable mechanism of damping consisted of a copper plate, a couple of magnets and a linkage mechanism. Damping is varied by driving the linkage. Driving the linkage to tune damping is necessary large torque because of attractive force of magnets. A compensation spring attached to the linkage can reduce the driving torque for tuning the damping. We made the proposed adjustable dynamic vibration absorber and verified whether the proposed adjustable mechanism is valid by experiments.