著者

海津 浩一 伊藤 脩平 日下 正広 木村 真晃 木之下 広幸

出版者

一般社団法人 日本機械学会

雑誌

日本機械学会論文集 (ISSN:21879761)

巻号頁・発行日

vol.84, no.862, pp.17-00485, 2018 (Released:2018-06-25)

参考文献数

10

被引用文献数

1

---

Joining of plastics and light metals contributes to the reduction of a product weight. In this study, the punching rivet method was applied to joining of an acrylic resin sheet and an aluminum alloy sheet. The punching rivet method can join the sheets without drilling. The riveting process of this method is constituted of the punching process of the sheets using the rivet shank and the fastening process of the sheets using the rivet and the rivet holder. The sheets are fastened by using the plastic deformation of the rivet shank. From the observation of the joints made by the punching rivet method, it was found that the acrylic resin sheet of the joint had no crack and out-of-plane deformation of the joint was small. From the results of the joint strength tests, it was considered that the joint made by the punching rivet method had high strength due to the effect of the pressures on seating faces of the rivet and the rivet holder. As a result, the punching rivet method was effective to join the acrylic resin sheet and the aluminum alloy sheet.

著者

海津 浩一 村田 裕斗 光延 裕紀 植西 亮介 日下 正広 木村 真晃

出版者

一般社団法人 日本機械学会

雑誌

日本機械学会論文集 (ISSN:21879761)

巻号頁・発行日

vol.84, no.858, pp.17-00550-17-00550, 2018 (Released:2018-02-25)

参考文献数

14

被引用文献数

1

---

In order to ensure the safety of passengers in the event of an accident, side member and crash box are mounted on automobiles. Cylindrical tubes, rectangular pipes and hat-shaped members have been examined as structural members that subjected to an axial compressive load. However, these structures have problems that the initial peak load is very high and the load rapidly decreases due to buckling during crushing. To solve the problems, we proposed a cellular solid with mimetic woody structure as a new structural member. Some woods have no initial sharp peak load and have a plateau region which the load is constant in the relationship between the load and the displacement, when the impulsive load are applied to them. We considered that those features were suitable for structural members like a side member or a crash box. The basic cell was a square block with a side length of 10 millimeters and it had a hole in the center. The cellular solid was constituted by combining some basic cells. Therefore, a homogeneous cellular solid was fabricated by making small holes in the aluminum cube. From results obtained from the impact crushing test and simulation by the FEM software LS-DYNA®, it was demonstrated that the proposed cellular solid had crushing characteristics similar to the wood, and the energy absorption characteristics were influenced by the shape and arrangement of the cells. As a result, it was shown that the results of experiment and analysis substantially corresponded. Since the load during crushing depended on the shape and arrangement of the cells, the possibility of controlling the energy absorption characteristics was shown.