著者
石崎 彰 柴田 幸也 渡邉 勝之 斎藤 和夫
出版者
The Institute of Electrical Engineers of Japan
雑誌
電気学会論文誌D(産業応用部門誌) (ISSN:09136339)
巻号頁・発行日
vol.111, no.9, pp.785-793, 1991
被引用文献数
20 11

The application of the direct drive system is increasing in the field of robot and factory automation because of controllability with high accuracy. However, it requires the motor high torque at low speed.<br>Although the vernier motor, presented by C. H. Lee in 1963, could produce the reluctance torque in low speed, it involved many problems to be solved. In this paper, the authors have studied the reluctance torque of vernier motor using the finite element field analysis. As the increase of rotor slot number is effective to produce high torque, in our model there are not only winding slots but also small slots on the stator teeth surfaces and the rotor slots are provided in the periphery of the core more than the total number of stator slots by the pole number. The calculated torques have agreed very well with the experimental results.<br>A prominent feature of the control scheme is to control the armature current phase based on the detected rotor slot position, so there is no problem such as pull-in or pull-out in the vernier motor of C. H. Lee. And then the instantaneous torque is controlled by the amplitude of armature current. The experimental results on both the speed control and the position control were also shown in the paper.