- 著者
- 深見 一弘 中西 周次 山崎 はるか 中戸 義禮
- 出版者
- 日本結晶成長学会
- 雑誌
- 日本結晶成長学会誌 (ISSN:03856275)
- 巻号頁・発行日
- vol.32, no.3, 2005
- 参考文献数
- 3
Electrodeposition of tin (Sn) under diffusion-limited condition showed a spontaneous potential oscillation together with the formation of highly ordered latticework structures, which grew vertically from the substrate. In-situ optical microscopic inspection revealed that the latticeworks are formed in synchronization with the potential oscillation.
1 0 0 0 OA 濃厚塩化カルシウム水溶液からの鉛電析
- 著者
- 宮本 真之 北田 敦 安達 謙 深見 一弘 邑瀬 邦明
- 出版者
- 一般社団法人 資源・素材学会
- 雑誌
- Journal of MMIJ (ISSN:18816118)
- 巻号頁・発行日
- vol.137, no.11, pp.103-109, 2021-11-30 (Released:2021-11-30)
- 参考文献数
- 25
- 被引用文献数
- 2
CaCl2 is a low-toxic, inexpensive reagent that dissolves in large amounts in water to form highly concentrated aqueous solutions, or hydrate melts electrolyte. In this work, it was investigated that the concentrated CaCl2 aqueous solutions (aq) as novel lead (Pb) electrodeposition baths. While PbCl2 is poorly soluble in water at room temperature, PbCl2 dissolved up to 0.452 mol kg−1 ([Pb(II)] = 93.7 g kg−1) by the formation of PbCl42− complexes in the concentrated CaCl2 aq due to its high Cl− activity. Electrochemical measurements confirmed that the apparent exchange current density and the limiting current density of Pb electrodeposition decreased with increasing CaCl2 concentration. Since the diffusion of Pb(II) species was limited due to the high viscosity and ionic strength of the solution, agitation was effective in improving ion transport and electrodeposition rate. The presence of chloride ions in Pb electrolysis is usually detrimental due to the low solubility of PbCl2, however, the highly concentrated CaCl2 solution can be a potential candidate electrolyte for PbCl2-based electrolytic processes.
1 0 0 0 OA 銅電解精製工程におけるノジュール成長メカニズム
- 著者
- 安達 謙 仲井 雄哉 三野 翔平 宮本 真之 北田 敦 深見 一弘 邑瀬 邦明
- 出版者
- 一般社団法人 資源・素材学会
- 雑誌
- Journal of MMIJ (ISSN:18816118)
- 巻号頁・発行日
- vol.136, no.2, pp.8-13, 2020-02-29 (Released:2020-02-28)
- 参考文献数
- 19
- 被引用文献数
- 3
The mechanism of nodulation in copper electrorefining process was investigated by experimental method and simulation, in particular as for its growth in height. Due to the high current density at the tip, the nodule height increased as an exponential function of the time for electrolysis. Therefore, the growth behavior of nodules was strongly affected by the size of the nucleus and the existence of the threshold size to lead an electrical short circuit was suggested. Since some nodules obtained in the industrial process included mold releasing agent carried from anode-casting process, mold releasing agents are considered to be one of the main causes of the large nodule and need to be removed for the improvement in the current efficiency.