著者

沖野 友洋 永田 恵輔 高野 純一 小林 秀敏

出版者

一般社団法人 日本機械学会

雑誌

日本機械学会論文集 (ISSN:21879761)

巻号頁・発行日

pp.21-00073, (Released:2021-09-17)

参考文献数

19

---

The crash safety structure of the railway vehicles is important as one of the safety measures against the train crews and the passengers in the event of a collision accident. It is impractical to perform collision testing many times using the actual train unit to design the crash safety structure, whereby the numerical simulation is effective and it is important to validate the analytical accuracy. However, there are few studies of collision tests and numerical simulations using actual size carbody structures according to Japanese design standards, and even fundamental data have not been sufficiently obtained. Therefore, firstly, the authors performed the collision test of an actual-size partial stainless-steel carbody structure of a railway leading vehicle against a rigid wall and finite element analysis under the same condition as the test for the purpose of validating and improving the analytical accuracy of numerical simulation. Secondly, we carried out the collision test of the same carbody structure of a railway leading vehicle against a typical large dump truck in Japan and obtained the fundamental data such as the time histories of the impact compression load and the acceleration of the carbody structure as well as the deformational and fractural behavior of them. We also performed FE analysis under the same condition as the experimental test and compared the numerical result to the experimental one. As a result, the numerical result was consistent with the experimental result. Finally, we expanded the partial carbody structure model to a single carbody model and carried out the collision analysis of it against a large dump truck. Thereby, the impact deformation and fracture behavior of the railway carbody under the actual level-crossing accident were estimated.

著者

永田 恵輔 沖野 友洋 高野 純一

出版者

一般社団法人 日本機械学会

雑誌

日本機械学会論文集 (ISSN:21879761)

巻号頁・発行日

vol.87, no.903, pp.21-00117, 2021 (Released:2021-11-25)

参考文献数

14

---

Although the number of accidents at level crossings in Japan has been decreasing annually, there is still possibility of such accidents to occur due to wrong-way entry. Therefore, it is essential to study the crashworthiness of rail vehicles in level-crossing accidents. Given that there are many possible collision scenarios for such accidents, it is useful to perform a comprehensive analysis of these scenarios. To investigate the crushing characteristics of a double-skinned aluminum-alloy car body structure for a conventional railway line, we conducted impact compression tests. The impact condition compresses the overall specimen's end face (overall compression condition) and part of its end face (local compression condition). The results of the impact compression tests were as follows. Buckling was the main cause of failure in the overall compression condition, whereas shear crushing was the main cause of failure in the local compression condition. Finite Element Method (FEM) analysis was also conducted in which several material rupture laws were used and compared with the test results. No appropriate solution could be obtained when the equivalent plastic strain was used as a threshold, whereas the results of analyses using the ESI-Wilkins-Kamoulakos (EWK) model showed good agreement with those of the experiments in both compression conditions.

著者

沖野 友洋 永田 恵輔 高野 純一 小林 秀敏

出版者

一般社団法人 日本機械学会

雑誌

日本機械学会論文集 (ISSN:21879761)

巻号頁・発行日

vol.87, no.902, pp.21-00073, 2021 (Released:2021-10-25)

参考文献数

19

---

The crash safety structure of the railway vehicles is important as one of the safety measures against the train crews and the passengers in the event of a collision accident. It is impractical to perform collision testing many times using the actual train unit to design the crash safety structure, whereby the numerical simulation is effective and it is important to validate the analytical accuracy. However, there are few studies of collision tests and numerical simulations using actual size carbody structures according to Japanese design standards, and even fundamental data have not been sufficiently obtained. Therefore, firstly, the authors performed the collision test of an actual-size partial stainless-steel carbody structure of a railway leading vehicle against a rigid wall and finite element analysis under the same condition as the test for the purpose of validating and improving the analytical accuracy of numerical simulation. Secondly, we carried out the collision test of the same carbody structure of a railway leading vehicle against a typical large dump truck in Japan and obtained the fundamental data such as the time histories of the impact compression load and the acceleration of the carbody structure as well as the deformational and fractural behavior of them. We also performed FE analysis under the same condition as the experimental test and compared the numerical result to the experimental one. As a result, the numerical result was consistent with the experimental result. Finally, we expanded the partial carbody structure model to a single carbody model and carried out the collision analysis of it against a large dump truck. Thereby, the impact deformation and fracture behavior of the railway carbody under the actual level-crossing accident were estimated.

著者

沖野 友洋 永田 恵輔 堀川 敬太郎 小林 秀敏

出版者

一般社団法人 日本機械学会

雑誌

日本機械学会論文集 (ISSN:21879761)

巻号頁・発行日

pp.19-00249, (Released:2019-12-26)

参考文献数

13

被引用文献数

2

---

The crash safety structure of the railway vehicles is effective as one of the safety measures against the train crews and the passengers in the event of a collision accident. The standards for crashworthiness of railway vehicles are defined in Europe and the U.S., while there are no standards for crash safety in Japan. Therefore, it is important to establish the evaluation method for crashworthiness of railway vehicles considering the actual situation of collision accidents in Japan. The authors carried out finite element analyses of a level crossing accident under various conditions (collision speed, mass of the obstacle and relative position between the train and the obstacle) based on the statistical analysis of serious level-crossing accidents in the past in Japan, and calculated the deceleration time histories in the passenger area under each condition. We evaluated these deceleration waveforms according to European and the U.S. standards for crashworthiness, and we also performed finite element analyses of dummy’s behavior and injury values using these deceleration waveforms as input. We verified the correlation between the evaluation results in terms of the deceleration according to these standards and dummy’s injury values obtained by finite element analyses. As a result, the evaluation according to the velocity at which a passenger contacts the seat back ahead of him (the U.S. standards) was the most effective. Moreover, the integrated values of the deceleration of the passenger area during an integration time t360 had the highest correlation with the dummy’s injury values.

著者

沖野 友洋 永田 恵輔 佐藤 裕之 堀川 敬太郎 小林 秀敏

出版者

一般社団法人 日本機械学会

雑誌

日本機械学会論文集 (ISSN:21879761)

巻号頁・発行日

vol.85, no.869, pp.18-00270, 2019 (Released:2019-01-25)

参考文献数

11

被引用文献数

2 4

---

The crash safety structure of the railway vehicles is effective as one of the safety measures against the train crews and the passengers in the event of a collision accident. However there is no standard for crash safety in Japan. In order to discuss guidelines for the crash safety design of the vehicle structure, it is important to grasp the actual situation of collision accidents in Japan. Therefore, firstly the authors performed the statistical analysis of serious level-crossing accidents for the past 30 years. Secondly, we carried out finite element analyses of a level crossing accident with a dump-truck under various conditions (collision position, collision angle, collision speed and mass of the load on the dump-truck) based on the result of the statistical analysis. We also evaluated their results in terms of the contact force, the deformation energy of the rail vehicle, the deformation amount of the cabin, the mean deceleration of passenger’s area (conformable to European standard), the maximum deceleration of the passenger’s area and the secondary impact velocity of the passenger (American standard). The degree of correlation among these results was discussed. The analyses showed that the horizontal collision position of the dump-truck and the collision speed had a comparatively large effect on the safety of passengers, and further that the mass of the load on the dump-truck also affected it when the secondary impact velocity was used as an evaluation index.