著者
村山 英晶 影山 和郎 成瀬 央 島田 明佳 鵜沢 潔
出版者
日本複合材料学会
雑誌
日本複合材料学会誌 (ISSN:03852563)
巻号頁・発行日
vol.28, no.5, pp.176-188, 2002-09-15 (Released:2009-08-11)
参考文献数
14
被引用文献数
1 1

The purpose of structural health monitoring (SHM) is to lead a structure to be safer at a lower cost. In SHM, it is important to evaluate the actual state of the structure. Recently, fiber-optic sensors have been developed actively, and one can measure nearly all of the physical measurands of interest by them. Since they also have excellent characteristics such as high sensitivity, immunity from electromagnetic interference, good mechanical characteristics and distributed configuration, they have been applied to “smart structures.” Capability of quasi or fully distributed sensing is especially the significant advantage compared to conventional sensors. We have applied the fiberoptic distributed sensors to SHM in the field and we developed the integrated systems with the fiberoptic sensors and CAD/CAE for two large composite structures. These systems could give us useful information on the structural state, such as deformation and temperature during/after manufacture.
著者
鵜沢 潔 池尾 茂
出版者
一般社団法人日本機械学会
雑誌
日本機械学會論文集. B編 (ISSN:03875016)
巻号頁・発行日
vol.51, no.472, pp.4230-4238, 1985-12-25

This paper deals with the laminar oscillatory flow of an incompressible fluid through a slightly convergent tube. The velocity distributions in the convergent tubes, whose convergent angles are in the range of 2~4°, are measured by a Laser Doppler Velocimeter. The flow in the convergent tube is numerically analysed by a finite difference method (SOR), without neglecting the convective terms in the Navier-Stokes equation. Experimental results agreed well with the numerical ones. The velocity profile of a laminar oscillatory flow in the convergent tube is quite different from the velocity profile in a straight tube of circular cross-section, even if the convergent angle is very small. The instantaneous pressure distribution in the convergent tube is uniform at each cross section as in a straight circular tube.
著者
影山 和郎 村山 英晶 大澤 勇 鵜沢 潔 村山 英晶 大澤 勇 鵜沢 潔
出版者
東京大学
雑誌
基盤研究(B)
巻号頁・発行日
2007

本研究は潮流発電用複合材料製タービンブレードの実現を目標に、高せん断強度を持つ複合材料・構造の研究、複合材料ブレードのスマートストラクチャー化の研究、複合材料ブレードの成形技術の研究をすすめ、スケールモデルの評価試験を実施し、その結果から、日本近海への設置が検討されている潮流発電設備に適用可能な大型・実大タービンブレードを複合材料にて製造するための設計技術、製造技術について検討・評価し、その成立性と技術課題を明らかにした。