文献一覧: 09151869 (ISSN) - Ceek.jp Altmetrics

1 0 0 0 OA フルカラー無機ELディスプレイの現状と将来の展望

著者: 伊東純一
出版者: 一般社団法人表面技術協会
雑誌: 表面技術 (ISSN:09151869)
巻号頁・発行日: vol.56, no.5, pp.260-260, 2005 (Released:2005-11-28)
参考文献数: 19

2015-12-23 12:48:51
1 + 0 Twitter

1 0 0 0 OA 電気めっきにより形成された皮膜の内部応力

著者: 金尾嘉徳
出版者: 一般社団法人表面技術協会
雑誌: 表面技術 (ISSN:09151869)
巻号頁・発行日: vol.43, no.7, pp.667-670, 1992-07-01 (Released:2009-10-30)
参考文献数: 11
被引用文献数: 2

2015-11-15 01:23:45
1 + 0 Twitter

1 0 0 0 OA 燃焼炎を用いた大気中でのダイヤモンド合成とその応用

著者: 広瀬洋一坂本明徳藤田信行
出版者: 一般社団法人表面技術協会
雑誌: 表面技術 (ISSN:09151869)
巻号頁・発行日: vol.40, no.1, pp.104-105, 1989-01-01 (Released:2009-10-30)
参考文献数: 5
被引用文献数: 3 1

2015-09-06 20:03:08
1 + 0 Twitter

1 0 0 0 OA スタッドピン型垂直引張試験機による密着性測定

著者: 大山健
出版者: 一般社団法人表面技術協会
雑誌: 表面技術 (ISSN:09151869)
巻号頁・発行日: vol.58, no.5, pp.292-292, 2007 (Released:2007-11-27)
参考文献数: 2
被引用文献数: 2 2

2015-05-20 10:03:09
1 + 0 Twitter

1 0 0 0 電顕画像データベースえみりあ(EMILIA)の紹介

著者: 谷山明進藤大輔
出版者: The Surface Finishing Society of Japan
雑誌: 表面技術 = The Journal of the Surface Finishing Society of Japan (ISSN:09151869)
巻号頁・発行日: vol.48, no.6, pp.618-622, 1997-06-01

2015-03-21 01:30:06
1 + 0 Twitter

1 0 0 0 OA プリント配線板技術の現状と将来

著者: 中井通國嶋眞文
出版者: 一般社団法人表面技術協会
雑誌: 表面技術 (ISSN:09151869)
巻号頁・発行日: vol.45, no.7, pp.668-672, 1994-07-01 (Released:2009-10-30)
参考文献数: 26

2015-02-27 11:47:59
1 + 0 Twitter

1 0 0 0 CVD法によりTiB_2/TiN二層被覆したSKD61鋼の溶融Alにおける耐浸食性

著者: 佐藤忠夫堀米毅上田幹人
出版者: The Surface Finishing Society of Japan
雑誌: 表面技術 = The Journal of the Surface Finishing Society of Japan (ISSN:09151869)
巻号頁・発行日: vol.51, no.6, pp.640-645, 2000-06-01
被引用文献数: 1

TiB2 and TiN films were coated by chemical vapor deposition on SKD 61 steel to improve the corrosion resistivity of a diecasting machine in a melted aluminum alloy. The protectivity of the film in the melted aluminum alloy was examined by an immersion test at 900°C and a thermal cycle test between room temperature and 900°C. TiN film, which serves as a binder, greatly improves the adhesion of TiB2 film on the steel substrate. The thermal cycle test indicated that the optimum thickness of TiB2 and TiN layers is at 4 and 6μm, respectively. Compared to ion-nitrized steel, steel coated by TiB2/TiN exhibits significantly higher degree of corrosion resistivity.

2015-02-17 19:06:50
1 + 0 Twitter

1 0 0 0 OA アルミニウムのアルカリ性浴陽極酸化皮膜に及ぼす電流波形および周波数の影響

著者: 野口駿雄吉村長蔵
出版者: 一般社団法人表面技術協会
雑誌: 表面技術 (ISSN:09151869)
巻号頁・発行日: vol.40, no.4, pp.584-589, 1989-04-01 (Released:2009-10-30)
参考文献数: 4

Specimens were electrolyzed by AC with various current waveform (sine wave, square wave and saw-tooth wave) and frequencies (10∼kHz) in NH4OH-NH4F system bath and NaOH-H2O2 system bath at a current density of 2A/dm2 for 30min, at 20°C.The use of a 10Hz square waveform resulted in a formation of a thicker film (5∼6μm) in both the NH4OH-NH4F and NaOH-H2O2 system baths. In the former case (NH4OH-NH4F system bath), film thickness decreased at frequencies above about 200Hz, reaching about 1∼2μm at frequencies above 1kHz. In the latter case (NaOH-H2O2 system bath), film thickness decreased according to increase of frequency, and it was about 0.5∼1μm in thickness at high frequency more than about 500Hz.The films anodized in the NaOH-H2O2 system bath with square current waveform was much rougher than those fromed using with sine or saw-tooth waveforms and larger pores were observed by microscope.Many large pores were observed in the coatings formed at high frequency and those formed in NaOH-H2O2 system bath had larger pores than those fromed in NH4OH-NH4F system bath.