著者

梅垣 浩二 室伏 広治 桜井 伸二 高松 潤二 東洋 功

出版者

一般社団法人 日本体育学会

雑誌

日本体育学会大会号

巻号頁・発行日

vol.55, 2004

著者

梅垣 浩二 室伏 広治 桜井 伸二 高松 潤二

出版者

一般社団法人 日本体育学会

雑誌

日本体育学会大会予稿集

巻号頁・発行日

vol.56, 2005

著者

高松 潤二 阿江 通良 藤井 範久

出版者

社団法人日本体育学会

雑誌

体育學研究 (ISSN:04846710)

巻号頁・発行日

vol.42, no.1, pp.19-29, 1997-05-10

被引用文献数

5

---

The purpose of this study was to develop a DLT procedure using pan and tilt cameras (henceforth, panning DLT) for the collection of three-dimensional coordinates data in large measurement volumes. Two stationary VTR cameras and two pan and tilt VTR cameras were used to obtain images of two control volumes. Two control volumes were used to compare the accuracy of coordinates data taken from stationary DLT with that of panning DLT technique: control volume A (CV-A) was 1.25×10×5m^3, and control volume B (CV-B) was 1.25×5×3m^3 in dimension. Control points and a ball thrown in each control volume were videotaped. DLT parameters for panning technique were calculated as follows: (1) Relative coordinates of control points to reference points were calculated from the digitizer coordinates of the reference points and control points. (2) Digitizer coordinates of the reference points and target objects were digitized. (3) Virtual control points were reconstructed from the relative coordinates of the control points in each frame. (4) Virtual control points appeared in the view of each camera were selected and used for the calculation of DLT parameters. Three-dimensional coordinates of control points were computed, and RMS errors were compared between stationary and panning DLT techniques. In CV-A of large volume, RMS errors of control points in stationary and panning DLT techniques were 14.0 and 7.5mm, respectively, while in CV-B of small volume, there was no significant difference in RMS errors, 8.3 and 5.8mm, respectively. Vertical accelerations of a thrown ball computed with two techniques were 9.74 and 9.71m.s^<-2> in CV-A. These results reveal that panning DLT technique developed in this study can be adapted for the collection of three-dimensional coordinates data in large measurement volumes.