著者

Kentaro YOSHIOKA

出版者

The Institute of Electronics, Information and Communication Engineers

雑誌

IEICE Transactions on Electronics (ISSN:09168524)

巻号頁・発行日

pp.2021CTI0002, (Released:2022-04-11)

被引用文献数

5

---

LiDAR is a distance sensor that plays a key role in the realization of advanced driver assistance systems (ADAS). In this paper, we present a tutorial and review of automotive direct time of flight (dToF) LiDAR from the aspect of circuit systems. We discuss the breakthrough in ADAS LiDARs through comparison with the first-generation LiDAR systems, which were conventionally high-cost and had an immature performance. We define current high-performance and low-cost LiDARs as next-generation LiDAR systems, which have significantly improved the cost and performance by integrating the photodetector, the readout circuit, and the signal processing unit into a single SoC.This paper targets reader who is new to ADAS LiDARs and will cover the basic principles of LiDAR, also comparing with range methods other than dToF. In addition, we discuss the development of this area through the latest research examples such as the 2-chip approach, 2D SPAD array, and 3D integrated LiDARs.

著者

Takashi SHIBATA Kazunori SATO Ryohei IKEJIRI

出版者

The Institute of Electronics, Information and Communication Engineers

雑誌

IEICE Transactions on Electronics (ISSN:09168524)

巻号頁・発行日

vol.E100.C, no.11, pp.1012-1020, 2017-11-01 (Released:2017-11-01)

参考文献数

20

被引用文献数

2

---

We conducted experimental classes in an elementary school to examine how the advantages of using stereoscopic 3D images could be applied in education. More specifically, we selected a unit of the Tumulus period in Japan for sixth-graders as the source of our 3D educational materials. This unit represents part of the coursework for the topic of Japanese history. The educational materials used in our study included stereoscopic 3D images for examining the stone chambers and Haniwa (i.e., terracotta clay figures) of the Tumulus period. The results of our experimental class showed that 3D educational materials helped students focus on specific parts in images such as attached objects of the Haniwa and also understand 3D spaces and concavo-convex shapes. The experimental class revealed that 3D educational materials also helped students come up with novel questions regarding attached objects of the Haniwa, and Haniwa's spatial balance and spatial alignment. The results suggest that the educational use of stereoscopic 3D images is worthwhile in that they lead to question and hypothesis generation and an inquiry-based learning approach to history.

著者

Takashi SHIBATA Kazunori SATO Ryohei IKEJIRI

出版者

The Institute of Electronics, Information and Communication Engineers

雑誌

IEICE TRANSACTIONS on Electronics (ISSN:09168516)

巻号頁・発行日

vol.E100-C, no.11, pp.1012-1020, 2017-11-01

---

We conducted experimental classes in an elementary school to examine how the advantages of using stereoscopic 3D images could be applied in education. More specifically, we selected a unit of the Tumulus period in Japan for sixth-graders as the source of our 3D educational materials. This unit represents part of the coursework for the topic of Japanese history. The educational materials used in our study included stereoscopic 3D images for examining the stone chambers and Haniwa (i.e., terracotta clay figures) of the Tumulus period. The results of our experimental class showed that 3D educational materials helped students focus on specific parts in images such as attached objects of the Haniwa and also understand 3D spaces and concavo-convex shapes. The experimental class revealed that 3D educational materials also helped students come up with novel questions regarding attached objects of the Haniwa, and Haniwa's spatial balance and spatial alignment. The results suggest that the educational use of stereoscopic 3D images is worthwhile in that they lead to question and hypothesis generation and an inquiry-based learning approach to history.

著者

Ryoya HONDA Minoru MIZUTANI Masaya TAMURA Takashi OHIRA

出版者

The Institute of Electronics, Information and Communication Engineers

雑誌

IEICE TRANSACTIONS on Electronics (ISSN:09168516)

巻号頁・発行日

vol.E106-C, no.11, pp.698-706, 2023-11-01

---

This paper formulates a class-E synchronous RF rectifier from a new viewpoint. The key point is to introduce a matrix and convolute the DC terms into RF matrices. The explicit expression of input impedance is demonstrated in plane geometry. We find out their input impedance exhibits a geodesic arc in hyperbolic geometry under ZVS operation, where the theoretical RF-DC conversion efficiency results in 100%. We verify the developed theory both numerically (circuit simulation) and experimentally (6.78MHz, 100W). We confirm that the input impedance becomes a geodesic arc for a wide range of DC load resistance. The presented theory is quite elegant since it is based on a matrix-based formulation and plane-geometrical expression.

著者

Haiyan SUN Xingyu WANG Zheng ZHU Jicong ZHAO

出版者

The Institute of Electronics, Information and Communication Engineers

雑誌

IEICE TRANSACTIONS on Electronics (ISSN:09168516)

巻号頁・発行日

vol.E106-C, no.3, pp.76-83, 2023-03-01

被引用文献数

1

---

In this paper, the spurious modes and quality-factor (Q) values of the one-port dual-mode AlN lamb-wave resonators at 500-1000 MHz were studied by theoretical analysis and experimental verification. Through finite element analysis, we found that optimizing the width of the lateral reflection boundary at both ends of the resonator to reach the quarter wavelength (λ/4), which can improve its spectral purity and shift its resonant frequency. The designed resonators were micro-fabricated by using lithography processes on a 6-inch wafer. The measured results show that the spurious mode can be converted and dissipated, splitting into several longitudinal modes by optimizing the width of the lateral reflection boundary, which are consistent well with the theoretical analysis. Similarly, optimizing the interdigital transducer (IDT) width and number of IDT fingers can also suppress the resonator's spurious modes. In addition, it is found that there is no significant difference in the Qs value for the two modes of the dual-mode resonator with the narrow anchor and full anchor. The acoustic wave leaked from the anchor into the substrate produces a small displacement, and the energy is limited in the resonator. Compared to the resonator with Au IDTs, the resonator with Al IDTs can achieve a higher Q value due to its lower thermo-elastic damping loss. The measured results show the optimized dual-mode lamb-wave resonator can obtain Qs value of 2946.3 and 2881.4 at 730.6 MHz and 859.5 MHz, Qp values of 632.5 and 1407.6, effective electromechanical coupling coefficient (k2eff) of 0.73% and 0.11% respectively, and has excellent spectral purity simultaneously.

著者

Akito IGUCHI Yasuhide TSUJI

出版者

The Institute of Electronics, Information and Communication Engineers

雑誌

IEICE TRANSACTIONS on Electronics (ISSN:09168516)

巻号頁・発行日

vol.E105-C, no.11, pp.644-651, 2022-11-01

---

This paper shows structural optimal design of optical waveguide components utilizing an efficient 3D frequency-domain and 2D time-domain beam propagation method (BPM) with an alternating direction implicit (ADI) scheme. Usual optimal design procedure is based on iteration of numerical simulation, and total computational cost of the optimal design mainly depends on the efficiency of numerical analysis method. Since the system matrices are tridiagonal in the ADI-based BPM, efficient analysis and optimal design are available. Shape and topology optimal design shown in this paper is based on optimization of density distribution and sensitivity analysis to the density parameters. Computational methods of the sensitivity are shown in the case of using the 3D semi-vectorial and 2D time-domain BPM based on ADI scheme. The validity of this design approach is shown by design of optical waveguide components: mode converters, and a polarization beam splitter.

著者

Marimo MATSUMOTO Masaya TAMURA

出版者

The Institute of Electronics, Information and Communication Engineers

雑誌

IEICE TRANSACTIONS on Electronics (ISSN:09168516)

巻号頁・発行日

vol.E105-C, no.9, pp.398-406, 2022-09-01

被引用文献数

2

---

Couplers in a film-type capacitive wireless power charging (CWC) system for an implantable medical device were designed and analyzed in this work. Due to the high conductivity of the human body, two paths contribute to the power transmission, namely a high-frequency current and an electric field. This was confirmed by an equivalent circuit of the system. During analysis of the system, we used pig skin with subcutaneous fat, which has a high affinity with the human body, to search for a highly efficient electrode shape. Subsequently, we fabricated the designed coupler and measured ηmax. An ηmax of 56.6% was obtained for a half-circular coupler with a radius of 20 mm and a distance of 10 mm between adjacent couplers. This study will contribute to the realization of implantable devices that can be recharged during breaks or while sleeping at home and is expected to significantly reduce the burden on patients.

著者

Fumihiro CHINA Naoki TAKEUCHI Hideo SUZUKI Yuki YAMANASHI Hirotaka TERAI Nobuyuki YOSHIKAWA

出版者

The Institute of Electronics, Information and Communication Engineers

雑誌

IEICE TRANSACTIONS on Electronics (ISSN:09168516)

巻号頁・発行日

vol.E105-C, no.6, pp.264-269, 2022-06-01

---

The adiabatic quantum flux parametron (AQFP) is an energy-efficient, high-speed superconducting logic device. To observe the tiny output currents from the AQFP in experiments, high-speed voltage drivers are indispensable. In the present study, we develop a compact voltage driver for AQFP logic based on a Josephson latching driver (JLD), which has been used as a high-speed driver for rapid single-flux-quantum (RSFQ) logic. In the JLD-based voltage driver, the signal currents of AQFP gates are converted into gap-voltage-level signals via an AQFP/RSFQ interface and a four-junction logic gate. Furthermore, this voltage driver includes only 15 Josephson junctions, which is much fewer than in the case for the previously designed driver based on dc superconducting quantum interference devices (60 junctions). In measurement, we successfully operate the JLD-based voltage driver up to 4 GHz. We also evaluate the bit error rate (BER) of the driver and find that the BER is 7.92×10-10 and 2.67×10-3 at 1GHz and 4GHz, respectively.

著者

Chongyu YU Jun FENG

出版者

The Institute of Electronics, Information and Communication Engineers

雑誌

IEICE TRANSACTIONS on Electronics (ISSN:09168516)

巻号頁・発行日

vol.E105-C, no.5, pp.184-193, 2022-05-01

---

A linear and broadband power amplifier (PA) for 5G phased-array is presented. The design improves the linearity by operating the transistors in deep class AB region. The design broadens the bandwidth by applying the inter-stage weakly-coupled transformer. The theory of transformers is illustrated by analyzing the odd- and even-mode model. Based on this, the odd-mode Q factor is used to evaluate the quality of impedance matching. Weakly- and strongly-coupled transformers are compared and analyzed in both the design process and applicable characteristics. Besides, a well-founded method to achieve the transformer-based balanced-unbalanced transformation is proposed. The fully integrated two-stage PA is designed and implemented in a 65-nm CMOS process with a 1-V power supply to provide a maximum small-signal gain of 19dB. The maximum output 1-dB compressed power (P1dB) of 17.4dBm and the saturated output power (PSAT) of 18dBm are measured at 28GHz. The power-added efficiency (PAE) of the P1dB is 26.5%. From 23 to 32GHz, the measured P1dB is above 16dBm, covering the potential 5G bands worldwide around 28GHz.

著者

Jun SHIBAYAMA Takuma KURODA Junji YAMAUCHI Hisamatsu NAKANO

出版者

The Institute of Electronics, Information and Communication Engineers

雑誌

IEICE TRANSACTIONS on Electronics (ISSN:09168516)

巻号頁・発行日

vol.E105-C, no.4, pp.159-162, 2022-04-01

---

A periodic array of InSb spheres on a substrate is numerically analyzed at terahertz frequencies. The incident field is shown to be coupled to the substrate due to the guided-mode resonance. The effect of the background refractive index on the transmission characteristics is investigated for sensor applications.

著者

Jian PANG Xueting LUO Zheng LI Atsushi SHIRANE Kenichi OKADA

出版者

The Institute of Electronics, Information and Communication Engineers

雑誌

IEICE TRANSACTIONS on Electronics (ISSN:09168516)

巻号頁・発行日

vol.E105-C, no.3, pp.102-109, 2022-03-01

---

This paper introduces a high-resolution and compact CMOS switch-type phase shifter (STPS) for the 5th generation mobile network (5G) n260 band. In this work, totally four coarse phase shifting stages and a high-resolution tuning stage are included. The coarse stages based on the bridged-T topology is capable of providing 202.5° phase coverage with a 22.5° tuning step. To further improve the phase shifting resolution, a compact fine-tuning stage covering 23° is also integrated with the coarse stages. Sub-degree phase shifting resolution is realized for supporting the fine beam-steering and high-accuracy phase calibration in the 5G new radio. Simplified phase control algorithm and suppressed insertion loss can also be maintained by the proposed fine-tuning stage. In the measurement, the achieved RMS gain errors at 39 GHz are 0.1 dB and 0.4 dB for the coarse stages and fine stage, respectively. The achieved RMS phase errors at 39 GHz are 3.1° for the coarse stages and 0.1° for the fine stage. Within 37 GHz to 40 GHz, the measured return loss within all phase-tuning states is always better than -14 dB. The proposed phase shifter consumes a core area of only 0.12mm2 with 65-nm CMOS process, which is area-efficient.

著者

Ryo KITAMURA Koichiro TANAKA Tadashi MORITA Takayuki TSUKIZAWA Koji TAKINAMI Noriaki SAITO

出版者

一般社団法人 電子情報通信学会

雑誌

IEICE Transactions on Electronics (ISSN:09168524)

巻号頁・発行日

vol.E96.C, no.10, pp.1301-1310, 2013-10-01 (Released:2013-10-01)

参考文献数

14

被引用文献数

3 4 1

---

This paper presents an automatic gain control (AGC) system suitable for 60GHz direct conversion receivers. By using a two step gain control algorithm with high-pass filter cutoff frequency switching, the proposed AGC system realizes fast settling time and wide dynamic range simultaneously. The paper also discusses wide-bandwidth variable gain amplifier (VGA) design. By introducing digitally-controlled resistors and gain flattening capacitors, the proposed VGA realizes wide gain range while compensating gain variations due to parasitic capacitance of MOS switches. The AGC system is implemented in a transceiver chipset where RFIC and BBIC are fabricated in 90nm CMOS and 40nm CMOS respectively. The measurement shows excellent dynamic range of 47dB with +/-1dB gain accuracy within 1µs settling time, which satisfies the stringent requirements of the IEEE802.11ad standard.

著者

TIEN DAT Pham KANNO Atsushi KAWANISHI Tetsuya

出版者

一般社団法人 電子情報通信学会

雑誌

IEICE Transactions on Electronics (ISSN:09168524)

巻号頁・発行日

vol.99, no.2, pp.331_e1-331_e1, 2016

著者

FIORI Franco CROVETTI Paolo S.

出版者

一般社団法人電子情報通信学会

雑誌

IEICE transactions on electronics (ISSN:09168524)

巻号頁・発行日

vol.86, no.11, pp.2309-2319, 2003-11-01

被引用文献数

1

---

In this paper a second order Volterra series model of an operational amplifier (opamp) circuit is presented. Such a model is suitable to the investigation of the rectification and demodulation effects of radio frequency (RF) interference superimposed on the nominal input signals and on the power supply voltage of an opamp. On the basis of the new model, some design criteria to improve the immunity of opamps to RF interference are proposed. Model predictions are verified by comparison with experimental test results.

著者

Junichi KINOSHITA Yoshihisa IKEDA Yuji TAKEDA

出版者

The Institute of Electronics, Information and Communication Engineers

雑誌

IEICE TRANSACTIONS on Electronics (ISSN:09168516)

巻号頁・発行日

vol.E96-C, no.11, pp.1391-1398, 2013-11-01

被引用文献数

8

---

Ultra-high luminance lamps emitting white light with a well-scattered blue spectrum from InGaN/GaN laser diodes and a phosphor-converted yellow spectrum show speckle contrast values as low as LED. Spectral behavior of the laser diodes is analyzed to find the reason why such low values are obtained. As a result, the PWM-driven, multi-longitudinal mode with dynamically broadened line-width is found to have a great effect on reducing speckle contrast. Despite using the lasers, such speckle-free lamps are considered to be very suitable for high-luminance and other various lighting applications.

著者

Peijian ZHANG Kunfeng ZHU Wensuo CHEN

出版者

The Institute of Electronics, Information and Communication Engineers

雑誌

IEICE TRANSACTIONS on Electronics (ISSN:09168516)

巻号頁・発行日

vol.E107-C, no.1, pp.12-17, 2024-01-01

---

In this paper, a novel trench MOS barrier Schottky contact super barrier rectifier (TMB-SSBR) is proposed by combining the advantages of vertical SSBR and conventional TMBS. The operation mechanism and simulation verification are presented. TMB-SSBR consists of MOS trenches with a vertical SSBR grid which replaces the Schottky diode in the mesa of a TMBS. Due to the presence of top p-n junction in the proposed TMB-SSBR, the image force barrier lowering effect is eliminated, the pinching off electric field effect by MOS trenches is weakened, so that the mesa surface electric field is much larger than that in conventional TMBS. Therefore, the mesa width is enlarged and the n-drift concentration is slightly increased, which results in a low specific on-resistance and a good tradeoff between reverse leakage currents and forward voltages. Compared to a conventional TMBS, simulation results show that, with the same breakdown voltage of 124V and the same reverse leakage current at room temperature, TMB-SSBR increases the figure of merit (FOM, equates to VB2/Ron, sp) by 25.5%, and decreases the reverse leakage by 33.3% at the temperature of 423K. Just like the development from SBD to TMBS, from TMBS to TMB-SSBR also brings obvious improvement of performance.

著者

Aditya RAKHMADI Kazuyuki SAITO

出版者

The Institute of Electronics, Information and Communication Engineers

雑誌

IEICE TRANSACTIONS on Electronics (ISSN:09168516)

巻号頁・発行日

vol.E106-C, no.12, pp.799-807, 2023-12-01

---

Transcatheter renal denervation (RDN) is a novel treatment to reduce blood pressure in patients with resistant hypertension using an energy-based catheter, mostly radio frequency (RF) current, by eliminating renal sympathetic nerve. However, several inconsistent RDN treatments were reported, mainly due to RF current narrow heating area, and the inability to confirm a successful nerve ablation in a deep area. We proposed microwave energy as an alternative for creating a wider ablation area. However, confirming a successful ablation is still a problem. In this paper, we designed a prediction method for deep renal nerve ablation sites using hybrid numerical calculation-driven machine learning (ML) in combination with a microwave catheter. This work is a first-step investigation to check the hybrid ML prediction capability in a real-world situation. A catheter with a single-slot coaxial antenna at 2.45 GHz with a balloon catheter, combined with a thin thermometer probe on the balloon surface, is proposed. Lumen temperature measured by the probe is used as an ML input to predict the temperature rise at the ablation site. Heating experiments using 6 and 8 mm hole phantom with a 41.3 W excited power, and 8 mm with 36.4 W excited power, were done eight times each to check the feasibility and accuracy of the ML algorithm. In addition, the temperature on the ablation site is measured for reference. Prediction by ML algorithm agrees well with the reference, with a maximum difference of 6°C and 3°C in 6 and 8 mm (both power), respectively. Overall, the proposed ML algorithm is capable of predicting the ablation site temperature rise with high accuracy.

著者

Chris MANGELSDORF

出版者

The Institute of Electronics, Information and Communication Engineers

雑誌

IEICE TRANSACTIONS on Electronics (ISSN:09168516)

巻号頁・発行日

vol.E106-C, no.10, pp.516-520, 2023-10-01

---

Recent years have seen a decline in the art of analog IC design even though analog interface and analog signal processing remain just as essential as ever. While there are many contributing factors, four specific pressures which contribute the most to the loss of creativity and innovation within analog practice are examined: process evolution, risk aversion, digitally assisted analog, and corporate culture. Despite the potency of these forces, none are found to be insurmountable obstacles to reinvigorating the industry. A more creative future is within our reach.

著者

Xiaoman LIU Yujie GAO Yuan HE Xiaohan YUE Haiyan JIANG Xibo WANG

出版者

The Institute of Electronics, Information and Communication Engineers

雑誌

IEICE TRANSACTIONS on Electronics (ISSN:09168516)

巻号頁・発行日

vol.E106-C, no.10, pp.570-579, 2023-10-01

---

The complexity and scale of Networks-on-Chip (NoCs) are growing as more processing elements and memory devices are implemented on chips. However, under strict power budgets, it is also critical to lower the power consumption of NoCs for the sake of energy efficiency. In this paper, we therefore present three novel input unit designs for on-chip routers attempting to shrink their power consumption while still conserving the network performance. The key idea behind our designs is to organize buffers in the input units with characteristics of the network traffic in mind; as in our observations, only a small portion of the network traffic are long packets (composed of multiple flits), which means, it is fair to implement hybrid, asymmetric and reconfigurable buffers so that they are mainly targeting at short packets (only having a single flit), hence the smaller power consumption and area overhead. Evaluations show that our hybrid, asymmetric and reconfigurable input unit designs can achieve an average reduction of energy consumption per flit by 45%, 52.3% and 56.2% under 93.6% (for hybrid designs) and 66.3% (for asymmetric and reconfigurable designs) of the original router area, respectively. Meanwhile, we only observe minor degradation in network latency (ranging from 18.4% to 1.5%, on average) with our proposals.

著者

Peijian Zhang Kunfeng Zhu Wensuo Chen

出版者

The Institute of Electronics, Information and Communication Engineers

雑誌

IEICE Transactions on Electronics (ISSN:09168524)

巻号頁・発行日

pp.2022ECP5059, (Released:2023-07-04)

---

In this paper, a novel trench MOS barrier Schottky contact super barrier rectifier (TMB-SSBR) is proposed by combining the advantages of vertical SSBR and conventional TMBS. The operation mechanism and simulation verification are presented. TMB-SSBR consists of MOS trenches with a vertical SSBR grid which replaces the Schottky diode in the mesa of a TMBS. Due to the presence of top p-n junction in the proposed TMB-SSBR, the image force barrier lowering effect is eliminated, the pinching off electric field effect by MOS trenches is weakened, so that the mesa surface electric field is much larger than that in conventional TMBS. Therefore, the mesa width is enlarged and the n-drift concentration is slightly increased, which results in a low specific on-resistance and a good tradeoff between reverse leakage currents and forward voltages. Compared to a conventional TMBS, simulation results show that, with the same breakdown voltage of 124 V and the same reverse leakage current at room temperature, TMB-SSBR increases the figure of merit (FOM, equates to VB2/Ron,sp) by 25.5%, and decreases the reverse leakage by 33.3% at the temperature of 423 K. Just like the development from SBD to TMBS, from TMBS to TMB-SSBR also brings obvious improvement of performance.