文献一覧: 一般社団法人日本ゴム協会 (出版者)

2 0 0 0 OA 耐油性ゴムの特性と配合設計 (1) ニトリルコム及びポリブレンド

著者: 森洋二西端修司
出版者: 一般社団法人日本ゴム協会
雑誌: 日本ゴム協会誌 (ISSN:0029022X)
巻号頁・発行日: vol.58, no.3, pp.158-166, 1985 (Released:2008-04-16)
参考文献数: 59
被引用文献数: 2 1

2023-01-23 14:21:42
2 + 5 Twitter

2 0 0 0 OA 制振材料に関する一般知識と材料データ

著者: 竹内文人
出版者: 一般社団法人日本ゴム協会
雑誌: 日本ゴム協会誌 (ISSN:0029022X)
巻号頁・発行日: vol.89, no.8, pp.249-253, 2016 (Released:2016-10-05)
参考文献数: 5

This article gives an overview of the fundamentals of polymeric materials for vibration damping. Based on vibration transmissibility of single degree of freedom systems, the differences between vibration isolation and vibration damping are described. Mechanism and materials design of the vibration damping materials are outlined with viscoelastic properties and those structures. As an example of controlling loss factor in viscoelastic properties, the formulations of EPDM with carbon black are described.

2022-10-29 22:24:28
2 + 1 Twitter

2 0 0 0 OA 分子動力学法の考え方

著者: 北川浩
出版者: 一般社団法人日本ゴム協会
雑誌: 日本ゴム協会誌 (ISSN:0029022X)
巻号頁・発行日: vol.72, no.11, pp.632-638, 1999 (Released:2007-07-09)
参考文献数: 13

2022-10-27 22:30:48
2 + 0 Twitter

2 0 0 0 OA 鉄道技術研究所国立分所

出版者: 一般社団法人日本ゴム協会
雑誌: 日本ゴム協会誌 (ISSN:0029022X)
巻号頁・発行日: vol.29, no.12, pp.1087-1088, 1956-12-15 (Released:2013-03-05)

2022-09-19 23:08:19
2 + 1 Wikipedia

2 0 0 0 OA ゴムとフイラーについて

著者: 牧浦雅仁
出版者: 一般社団法人日本ゴム協会
雑誌: 日本ゴム協会誌 (ISSN:0029022X)
巻号頁・発行日: vol.71, no.9, pp.583-587, 1998 (Released:2007-07-09)
参考文献数: 8
被引用文献数: 14 10

2022-08-07 14:11:57
2 + 1 Twitter

2 0 0 0 OA 第6講ゴムは充てん剤で強くなる充てん補強の化学

著者: 編集委員会
出版者: 一般社団法人日本ゴム協会
雑誌: 日本ゴム協会誌 (ISSN:0029022X)
巻号頁・発行日: vol.76, no.11, pp.424-428, 2003 (Released:2007-05-28)
参考文献数: 8
被引用文献数: 3

2022-03-20 13:44:00
1 知恵袋
1 + 0 Twitter

2 0 0 0 OA やさしいゴムの物理第3講ゴム弾性と粘弾性の基礎

著者: 編集委員会
出版者: 一般社団法人日本ゴム協会
雑誌: 日本ゴム協会誌 (ISSN:0029022X)
巻号頁・発行日: vol.80, no.10, pp.404-407, 2007-10-15 (Released:2010-03-12)

2 0 0 0 OA ゴム用合成可塑剤の紹介と各種ゴム用途への適用

著者: 田中友基
出版者: 一般社団法人日本ゴム協会
雑誌: 日本ゴム協会誌 (ISSN:0029022X)
巻号頁・発行日: vol.89, no.11, pp.347-351, 2016 (Released:2017-03-17)
参考文献数: 7
被引用文献数: 3

2022-01-27 20:05:41
2 + 2 Twitter

2 0 0 0 OA 生分解性プラスチック

著者: 山下岩男
出版者: 一般社団法人日本ゴム協会
雑誌: 日本ゴム協会誌 (ISSN:0029022X)
巻号頁・発行日: vol.64, no.1, pp.16-24, 1991 (Released:2007-07-09)
参考文献数: 66
被引用文献数: 2

2022-01-22 12:24:11
2 + 0 Twitter

2 0 0 0 OA ゴムホースのオゾン劣化

著者: 牧野保
出版者: 一般社団法人日本ゴム協会
雑誌: 日本ゴム協会誌 (ISSN:0029022X)
巻号頁・発行日: vol.40, no.4, pp.314-317, 1967-04-15 (Released:2009-10-16)

2021-06-20 18:29:52
2 + 25 Twitter

2 0 0 0 OA ゴム手袋の製造方法と市場動向

著者: 赤羽徹也
出版者: 一般社団法人日本ゴム協会
雑誌: 日本ゴム協会誌 (ISSN:0029022X)
巻号頁・発行日: vol.88, no.9, pp.369-373, 2015 (Released:2015-11-25)
参考文献数: 3
被引用文献数: 1

Rubber gloves are the indispensable items in our life. They protect our hand from an injury, a medicine wound, a virus and bacteria. Over the past years, there has been a notable rise in the demand of gloves whenever there is an outbreak of flu or viral diseases. During and after such outbreaks, there is a sudden change in the demand for rubber gloves due to increased hygiene concerns. In addition, the demand for gloves from food industry and others services is also set to increase. This report gives a production method and the market trend of rubber gloves.

2021-06-05 04:47:15
1 + 0 Twitter
1 + 1 Wikipedia

2 0 0 0 OA ラテックスアレルギー病態生理と診断・治療

著者: 北林耐
出版者: 一般社団法人日本ゴム協会
雑誌: 日本ゴム協会誌 (ISSN:0029022X)
巻号頁・発行日: vol.88, no.9, pp.351-357, 2015 (Released:2015-11-25)
参考文献数: 18

Latex allergy (LA) is the allergic reaction triggered by proteins containing in natural rubber latex (NRL) or chemicals in NRL products. The pathophysiology of LA is divided into the immediate type (type I) allergy and the delayed type (type IV) allergy. Majority of LA is the allergic reactions mediated by specific IgE (sIgE) antibodies produced by contacts and exposures to NRL by inhaling the powder in the environments when wearing or removing the gloves made from NRL. Recently, the frequency of immediate type allergy reaction is decreasing, but the delayed type allergy reaction caused by chemical substances added during glove manufacturing is increasing. Allergic contact dermatitis (ACD) caused by thiuram compound (a vulcanization accelerator), is increasing and it is clear that 80% of ACD cases in health care workers are sensitized to this substance. For Diagnosis of LA, a detailed patient interview is the most important and sensitization to NRL is confirmed by a blood test or skin test to show an existence of sIgE antibodies to NRL. Also a positive provocation is useful for diagnosis. Treatment for type I reactions is histamine H1 receptor antagonist or systemic steroids. However, in severe case such as anaphylactic shock, it is necessary to administer adrenaline. In case of type IV reactions, it is important to take local steroids or use moisturizing agents in addition to replace gloves free of vulcanization accelerator.

2021-04-04 19:15:29
2 + 2 Twitter

2 0 0 0 OA ゴムの工業的合成法

著者: 山崎聡
出版者: 一般社団法人日本ゴム協会
雑誌: 日本ゴム協会誌 (ISSN:0029022X)
巻号頁・発行日: vol.89, no.2, pp.29-35, 2016 (Released:2016-03-25)
参考文献数: 15

This article reviews the outline, manufacturing method, producers and properties of PUR (Polyurethane elastomers). PUR is a kind of multi-block copolymer composed of soft segment reacted with long chain polyol and polyisocyanate and hard segment reacted with polyisocyanate and short chain polyol. PUR is mainly divided into TSU (Thermosetting polyurethane elastomers) and TPU (Thermoplastic polyurethane elastomers) which has accounted for about 90% of world-wide PUR market. In particular, AAGR (Annual average growth ratio) and the market volume of TPU are expected to reach about 5-7% and 540 thousands ton towards 2018, respectively. TPUs have been manufactured in bulk by batch and continuous polymerization method as the form of pellets for injection, extrusion, blow and calendar processes and also in water or organic solvent by suspension polymerization as the form of particles with mean average diameter size of about 150 micrometer for slush molding process. Most of TPUs and TSUs are applied to various markets such as mobility parts, medical, healthcare, fiber, packages, roll, electronics and industrial parts and so on. Recently, PUR based on a new specialty diisocyanate which satisfies elasticity, heat resistance and light stability are developed for specific application.

2021-02-24 14:44:24
1 + 0 Twitter
1 + 1 Wikipedia

2 0 0 0 OA 可塑剤

著者: 井上徹裕
出版者: 一般社団法人日本ゴム協会
雑誌: 日本ゴム協会誌 (ISSN:0029022X)
巻号頁・発行日: vol.50, no.10, pp.672-680, 1977 (Released:2008-04-16)
参考文献数: 37

2021-02-22 21:15:09
2 + 0 Twitter

2 0 0 0 OA 用済タイヤ焼却にする熱利用

著者: 石澤登
出版者: 一般社団法人日本ゴム協会
雑誌: 日本ゴム協会誌 (ISSN:0029022X)
巻号頁・発行日: vol.66, no.3, pp.140-148, 1993 (Released:2007-07-09)
参考文献数: 15
被引用文献数: 1 1

2020-12-16 23:14:08
2 + 1 Twitter

2 0 0 0 OA 競争用自転車タイヤ

著者: 大武義人
出版者: 一般社団法人日本ゴム協会
雑誌: 日本ゴム協会誌 (ISSN:0029022X)
巻号頁・発行日: vol.80, no.3, pp.93-99, 2007-03-15 (Released:2010-03-12)
参考文献数: 14

The bicycle tire for the truck race has been improved to be much lighter than the tire of general bicycle. The bicycle tire for the race is used with a high pressure of 10 atm. Since the best speed of the truck race is 80km per hour, much contrivance has been conducted to the tire for the truck race. For example, NR (natural rubber) latex is used as a raw tube material, since the tear strength of NR is strong, in order to reduce the risk to burst. Therefore, there is small impact of the puncture, so the accident in which rider falls down from the bicycle is suppressed. For the adhesion of rim and tire, the rubber cement made by CR (chloroprene rubber) is used. The rubber cement has the work as cushion material of the stress which is added to the tire from various directions.