著者
大宮司 勝弘 竹内 淳 岩岡 竜夫 岩田 利枝
出版者
日本建築学会
雑誌
日本建築学会計画系論文集 (ISSN:13404210)
巻号頁・発行日
vol.74, no.636, pp.505-513, 2009-02-28 (Released:2009-11-02)
被引用文献数
1

The purpose of this study is to identify the architectural characteristics of Kyoto Tower Building, which was designed by Mamoru Yamada. The description of space composition and the features of the architectural design of Kyoto Tower Building, at the initial completion time, are based on a documentary film showing the building under construction and pictures and drawings held by Osaka Yamada Mamoru Architects and Engineers. On the basis of Yamada's studies of the floor plans, the rough drawings and perspectives, the design process of this building is analyzed.
著者
今浪 絵里 大宮司 勝弘 岩岡 竜夫
出版者
日本建築学会
雑誌
日本建築学会計画系論文集 (ISSN:13404210)
巻号頁・発行日
vol.73, no.627, pp.1131-1137, 2008-05-30 (Released:2009-02-25)
参考文献数
57
被引用文献数
1 1

The purpose of this study is to clarify the theory of house design by Mamoru Yamada, especially through the design of “Tsurumi residence” in 1931. Before designing this house, Yamada had been in Europe to participate in the international congress of CIAM and to visit several housing projects in 1929-1930, which was reported as an article “Minimum size of living house” in 1931. And after designing Tsurumi residence, he wrote about the past, present and future of Japanese houses in his another article “House of tomorrow” which was published in 1943. In this study, through the consideration of the relationship between the design of Tsurumi residence and contents of these two articles written by him, his theory of house design and his methods to make house comfortable were extracted.
著者
横尾 真 山名 善之 岩岡 竜夫
出版者
日本建築学会
雑誌
日本建築学会計画系論文集 (ISSN:13404210)
巻号頁・発行日
vol.80, no.712, pp.1463-1471, 2015

 This study aims to clarify architects' thoughts of “AÉRO-CLUB ROLAND-GARROS À BUC”, which is the relationship between features and building components. It is about the features such as floor planning, concept of space, structure type, facility planning and also about the building components such as the assembly system as well as the list of all parts. The composition of this study includes the analysis of the features of this building and the analysis of the technological aspect of the building components. Finally, we discuss what kind of relationship the two has.
著者
横尾 真 山名 善之 岩岡 竜夫
出版者
日本建築学会
雑誌
日本建築学会技術報告集 (ISSN:13419463)
巻号頁・発行日
vol.21, no.48, pp.853-858, 2015

This study aims to clarify the design feature of Maison du Peuple de Clichy, which is located in the northwest of Paris and was designed by French architects in the late 1930’s. As repair works have been carried out in recent years, it became possible for us to analyze this building. We are specifically focusing on the composition of each floor plan, the structure frame and two technical features. One is the prefabricated curtain wall panel which was the first in the world. The other is the system of moveable elements which can be used either as a market, a conference room or a cinema.
著者
横尾 真 山名 善之 岩岡 竜夫
出版者
日本建築学会
雑誌
日本建築学会計画系論文集 (ISSN:13404210)
巻号頁・発行日
no.739, pp.2421-2429, 2017-09

&nbsp;&ldquo;Maison d&eacute;montable en ancier B. L. P. S.&rdquo; was designed by French architects Eugene Beaudouin, Marcel Lods, Jean Prouv&eacute;, and Forges de Strasbourg as a constructor in 1936. An external form is 3.3m&times;3.3m, this small house is used for 2 persons. It consists a living room with 2 beds and a dining table, a kitchen space, a toilet and shower space and also could assemble and be demountable at anywhere. The begginig of this small house was made a prototype at Ateliers Jean Prouv&eacute; that was presented at the sixth exposition de l'habitation in the salon des arts m&eacute;nagers in January 1939. All parts not only the entire house but also furniture were made of the thin steel sheets, there was not the foundation by Reinforced concrete. When Lods demonstrated at the exposition, in fact he could assemble for 2.5 hours and be demountable for 45 minutes. In the same year, someone stolen this small house before begining World War II, and it can never be seen anywhere.<br>&nbsp;As a background and purpose of this study, it aims to clarify architects' thoughts of &ldquo;Maison d&eacute;montable en ancier B. L. P. S. &ldquo;, which focuses on the relationship between features and building components. It is about the features such as floor planning, concept of space, structure type, facility planning, and also about the building components such as the assembly system as well as the list of all parts. Finally, we discuss what kind of relationship the two has.<br>&nbsp;The previously-mentioned 3 French architects collaborated mainly in 3 projects, this small house is one of them, and its second project. Prouv&eacute; has explained through an interview in the book that was written by Peter Sulzer in 2000, it is &ldquo;B. L. P. S. entirely made at my place&hellip; an enormous number of innovations&hellip; like the system of assembling the panels...&rdquo;. Besides Franz Graf has explained that this small house, it's design, has been a great help in designing the fa&ccedil;ade of the Medische Faculteit in Rotterdam (today: Erasmus MC) by Prouv&eacute;, built in 1968. This means that Prouv&eacute; used the similar details in different project 30 years past, it could also say to find an importance innovation in this small house.<br>&nbsp;As a result, we found that important design through to clarify features and building components of &ldquo;Maison d&eacute;montable en ancier B. L. P. S.&rdquo;. It is consisted by 5 building components which are the roof panel, the floor panel, the wall panel, the facility unit, the funiture unit, and they are a set for 2 components. Each of them has a meanings, such as it plays a role as Instruction how to assemble or where sets a position for the next assembled parts. Detail of the joints which connects between building components, has same detail, it can say that a set of building components are able to use turning upside down and is possible to make entire building what it is designed 2 building components by same one without the floor panels and the facility unit.
著者
横尾 真 山名 善之 岩岡 竜夫
出版者
日本建築学会
雑誌
日本建築学会計画系論文集 (ISSN:13404210)
巻号頁・発行日
vol.80, no.712, pp.1463-1471, 2015 (Released:2015-07-11)
参考文献数
15

This study aims to clarify architects' thoughts of “AÉRO-CLUB ROLAND-GARROS À BUC”, which is the relationship between features and building components. It is about the features such as floor planning, concept of space, structure type, facility planning and also about the building components such as the assembly system as well as the list of all parts. The composition of this study includes the analysis of the features of this building and the analysis of the technological aspect of the building components. Finally, we discuss what kind of relationship the two has.
著者
横尾 真 山名 善之 岩岡 竜夫
出版者
一般社団法人 日本建築学会
雑誌
日本建築学会技術報告集 (ISSN:13419463)
巻号頁・発行日
vol.21, no.48, pp.853-858, 2015-06-20 (Released:2015-06-20)
参考文献数
24

This study aims to clarify the design feature of Maison du Peuple de Clichy, which is located in the northwest of Paris and was designed by French architects in the late 1930’s. As repair works have been carried out in recent years, it became possible for us to analyze this building. We are specifically focusing on the composition of each floor plan, the structure frame and two technical features. One is the prefabricated curtain wall panel which was the first in the world. The other is the system of moveable elements which can be used either as a market, a conference room or a cinema.
著者
横尾 真 山名 善之 岩岡 竜夫
出版者
日本建築学会
雑誌
日本建築学会計画系論文集 (ISSN:13404210)
巻号頁・発行日
vol.82, no.739, pp.2421-2429, 2017 (Released:2017-09-30)
参考文献数
11

“Maison démontable en ancier B. L. P. S.” was designed by French architects Eugene Beaudouin, Marcel Lods, Jean Prouvé, and Forges de Strasbourg as a constructor in 1936. An external form is 3.3m×3.3m, this small house is used for 2 persons. It consists a living room with 2 beds and a dining table, a kitchen space, a toilet and shower space and also could assemble and be demountable at anywhere. The begginig of this small house was made a prototype at Ateliers Jean Prouvé that was presented at the sixth exposition de l'habitation in the salon des arts ménagers in January 1939. All parts not only the entire house but also furniture were made of the thin steel sheets, there was not the foundation by Reinforced concrete. When Lods demonstrated at the exposition, in fact he could assemble for 2.5 hours and be demountable for 45 minutes. In the same year, someone stolen this small house before begining World War II, and it can never be seen anywhere. As a background and purpose of this study, it aims to clarify architects' thoughts of “Maison démontable en ancier B. L. P. S. “, which focuses on the relationship between features and building components. It is about the features such as floor planning, concept of space, structure type, facility planning, and also about the building components such as the assembly system as well as the list of all parts. Finally, we discuss what kind of relationship the two has. The previously-mentioned 3 French architects collaborated mainly in 3 projects, this small house is one of them, and its second project. Prouvé has explained through an interview in the book that was written by Peter Sulzer in 2000, it is “B. L. P. S. entirely made at my place… an enormous number of innovations… like the system of assembling the panels...”. Besides Franz Graf has explained that this small house, it's design, has been a great help in designing the façade of the Medische Faculteit in Rotterdam (today: Erasmus MC) by Prouvé, built in 1968. This means that Prouvé used the similar details in different project 30 years past, it could also say to find an importance innovation in this small house. As a result, we found that important design through to clarify features and building components of “Maison démontable en ancier B. L. P. S.”. It is consisted by 5 building components which are the roof panel, the floor panel, the wall panel, the facility unit, the funiture unit, and they are a set for 2 components. Each of them has a meanings, such as it plays a role as Instruction how to assemble or where sets a position for the next assembled parts. Detail of the joints which connects between building components, has same detail, it can say that a set of building components are able to use turning upside down and is possible to make entire building what it is designed 2 building components by same one without the floor panels and the facility unit.
著者
竹内 宏俊 岩岡 竜夫 羽生 修二
出版者
日本建築学会
雑誌
日本建築学会計画系論文集 (ISSN:13404210)
巻号頁・発行日
vol.70, no.594, pp.231-236, 2005-08-30 (Released:2017-02-11)
被引用文献数
1 5

The purpose of this study is to make the meaning of Scale in Architecture clear by doing an analysis of various literatures which explain the terms of scale. The results of this analysis, the scale of architecture is not only the system of size in various levels (physical, visual, technological, economical, etc.), but also the allometrical relations between the proportions which exist in similar forms of different size each other.
著者
大宮司 勝弘 竹内 淳 岩岡 竜夫 岩田 利枝
出版者
日本建築学会
雑誌
日本建築学会計画系論文集
巻号頁・発行日
vol.74, no.636, pp.505-513, 2009

The purpose of this study is to identify the architectural characteristics of Kyoto Tower Building, which was designed by Mamoru Yamada. The description of space composition and the features of the architectural design of Kyoto Tower Building, at the initial completion time, are based on a documentary film showing the building under construction and pictures and drawings held by Osaka Yamada Mamoru Architects and Engineers. On the basis of Yamada's studies of the floor plans, the rough drawings and perspectives, the design process of this building is analyzed.
著者
大宮司 勝弘 竹内 淳 岩岡 竜夫 岩田 利枝
出版者
一般社団法人日本建築学会
雑誌
日本建築学会計画系論文集 (ISSN:13404210)
巻号頁・発行日
vol.74, no.636, pp.505-513, 2009-02-28

The purpose of this study is to identify the architectural characteristics of Kyoto Tower Building, which was designed by Mamoru Yamada. The description of space composition and the features of the architectural design of Kyoto Tower Building, at the initial completion time, are based on a documentary film showing the building under construction and pictures and drawings held by Osaka Yamada Mamoru Architects and Engineers. On the basis of Yamada's studies of the floor plans, the rough drawings and perspectives, the design process of this building is analyzed.
著者
今浪 絵里 大宮司 勝弘 岩岡 竜夫
出版者
一般社団法人日本建築学会
雑誌
日本建築学会計画系論文集 (ISSN:13404210)
巻号頁・発行日
vol.73, no.627, pp.1131-1137, 2008-05-30
被引用文献数
2

The purpose of this study is to clarify the theory of house design by Mamoru Yamada, especially through the design of "Tsurumi residence" in 1931. Before designing this house, Yamada had been in Europe to participate in the international congress of CIAM and to visit several housing projects in 1929-1930, which was reported as an article "Minimum size of living house" in 1931. And after designing Tsurumi residence, he wrote about the past, present and future of Japanese houses in his another article "House of tomorrow" which was published in 1943. In this study, through the consideration of the relationship between the design of Tsurumi residence and contents of these two articles written by him, his theory of house design and his methods to make house comfortable were extracted.