著者
外岡 豊
出版者
JAPAN TECHNICAL ASSOCIATION OF THE PULP AND PAPER INDUSTRY
雑誌
紙パ技協誌 (ISSN:0022815X)
巻号頁・発行日
vol.57, no.10, pp.1420-1431,019, 2003-10-01 (Released:2010-10-27)
参考文献数
13

20世紀後半は巨大資本のビジネス競争により世界的な大量消費がなされ世界的な資源の枯渇と環境の破壊を招いた。オゾン層破壊, 気候変動, 化学物質汚染など地球史的にも異常体験といえる時代であった。持続可能的発展と簡単に言うが20世紀後半の延長上には持続可能社会への入り口さえ見つからないであろう。持続可能社会への再出発点として3千年紀の人類社会の方向性を考え, 20世紀後半の異常性を再確認して21世紀前半の日本のあり方を考える。地球温暖化問題はその再出発への合図となる。
著者
田中 恒雄
出版者
紙パルプ技術協会
雑誌
紙パ技協誌 (ISSN:0022815X)
巻号頁・発行日
vol.49, no.5, pp.813-820, 1995-05-01 (Released:2009-11-16)
参考文献数
41

In order to expect the feasible printing conditions to obtain high definition image by modern printing technology, physical properties of paper surfaces relating ink transfer are mainly discussed due to the experimental data accumulated thus far. The macroscopic structures of paper surfaces depending on the porosity, the smoothness, the compressibility and so on, are responsible for the tone rendering by small halftone ink dots the size of which reaches about 10 μm. To control the dot gain to be minimum is essential in the high definition printing process. However, the dot gain formation seems prone to be made by the rheological properties of printing ink rather than by the properties of paper surfaces mentioned above. Also, the thickness control of ink film is much more important in the process as compared to that in the ordinary halftone reproduction process.
著者
堀川 幸稔
出版者
紙パルプ技術協会
雑誌
紙パ技協誌 (ISSN:0022815X)
巻号頁・発行日
vol.59, no.8, pp.1198-1201, 2005 (Released:2006-08-25)

現在, 製紙工場では様々な用途に粘着テープが使用されている。粘着テープでは貼り付けた直後に接着強度を発現することから, 作業の自動化, 作業時間の削減などに有効である。製紙工場で使用される粘着テープは, 損紙としてパルパーに投入される可能性があることから, 水溶性 (水分散性) という他の業界, 用途にはない特殊な特性が必要とされている。水溶性 (水分散性) 粘着テープを設計する際には粘着剤の設計が最も重要である。水溶性 (水分散性) は他の多くの特性と相対する関係にあり, 例えば耐熱性を向上しようとした場合に水溶性 (水分散性) は低下する場合がある。製紙工場で使用される粘着テープは, その用途に要求される特性と水溶性 (水分散性) を両立させなければならない点でその設計が非常に難しい。水溶性 (水分散性) については各テープメーカー, 各製紙会社にてそれぞれの評価方法が実施されているが, 今回はこの一例をあげるとともに, 水溶性 (水分散性) を中心とした製紙工場で使用される粘着テープの技術について説明する。