著者
牧 俊夫 矢野 正行
出版者
公益社団法人 日本セラミックス協会
雑誌
窯業協會誌 (ISSN:00090255)
巻号頁・発行日
vol.89, no.1035, pp.585-594, 1981-11-01 (Released:2010-04-30)
参考文献数
22
被引用文献数
1 1

硫酸アルミニウムと塩化アルミニウムの水溶液及び消石灰乳液を種々の割合に混合することによって, 主にエットリンジャイト (6CaO・Al2O3・3SO3・32H2O) からなる白色のケーキを作製した. 次にそのケーキを500℃及び600℃で仮焼し, 粉砕して80-200メッシュの粒度をもつ試料を調製した. 2.9CaO・Al2O3l・4SO3または2.5CaO・Al2O3・1.2SO3の酸化物組成をもつ仮焼粉末は, 粒子強度とウランに対する捕集速度がかなり大きかった. すなわち U(VI) イオンの100ppmを主に[UO2(CO3)3]4-の形で含むアルカリ水溶液の50ml中に, それらの粉末の0.100gを2時間浸漬したとき, それらの試料は溶液中に存在するU(VI) イオンの80-100%を捕集した. 捕集したウランは60℃に保った5% NaHCO3溶液中に試料を1時間浸漬する方法で脱着させることができる.捕集前後の上記粉末のX線回折分析及び試料粉末を浸漬したときに起こる純水及び吸着液のpHの変化から, 本試料によるウランの捕集は, 試料の加水分解により生成するCa(OH)2と吸着液中の[UO2(CO3)3]4-イオンが反応して試料表面に二ウラン酸カルシウム (CaU2O7) が生成するために起こること, また脱着はCaU2O7と上記NaHCO3溶液が反応してU(VI) がもとの[UO2(CO3)3]4-イオンに戻るために起こることを明らかにした.
著者
陣内 和彦
出版者
公益社団法人 日本セラミックス協会
雑誌
窯業協會誌 (ISSN:00090255)
巻号頁・発行日
vol.82, no.948, pp.454-461, 1974-08-01 (Released:2010-04-30)
参考文献数
10
被引用文献数
1

Recently, big increase of ceramic product has brought the great consumption of its materials. The author has tried to obtain the ceramic clay from the weathered granitic rocks. At first the forming process and containing situation of clay minerals were surveyed on various rocks at each step of weathering, and then the selection of suitable raw material and extracting method of ceramic clay were investigated.The results of this study are summarized as follows:(1) Among the constituent minerals of granitic rocks, plagioclase and biotite are altered most easily by weathering and kaoline, gibbsite, vermiculite etc. are formed and contained in the weathered rocks.(2) Kaoline is contained in all kinds of weathered and decomposed granitic rocks, even in the rather coarse size range of about 100-150micron.(3) The clay from so called “masatsuchi” can be used as a material of ceramics. Especially, the extremely weathered but not contaminated one provides the clay of higher grade in good yield.(4) In order to get the clay of high quality from the weathered granitic rocks, raw material should be scrubbed softly in water, and the cut size of clay should be as fine as possible. And clay can be made higher grade through magnetic separation.
著者
曽我 直弘 田代 仁
出版者
公益社団法人 日本セラミックス協会
雑誌
窯業協會誌 (ISSN:00090255)
巻号頁・発行日
vol.70, no.797, pp.143-147, 1962-05-01 (Released:2010-04-30)
参考文献数
15
被引用文献数
7 7

Glasses containing various amount of trivalent cerium ion (20K2O, 10BaO, 70SiO2, 0.1CeO2, and 0-0.2 Si (mole %)) were first exposed to γ-radiation until they were colored to the same degree, and then, the fading of their color occured with the lapse of time was measured. The content of Ce3+ ion in these glasses was also measured by the spectrophotometric method in order to obtain a relation between its content in the glasses and the fading velocity of their γ-ray induced color. The result showed that the higher the content of Ce3+ ion in the glass is, the higher the fading velocity of its color is.On the basis of this result and the results of the spectrophotometric studies on the cerium-containing glasses so far made by the authors (J. Ceram. Assoc. Japan, 68, 132; 169 (1960)), the authors gave their view on the role of Ce3+ ion in preventing the γ-ray induced coloration of glass: Being excited by γ-ray irradiation, oxygen ions in glass loose some of their electrons. The Ce3+ ions give their weak-bonded 4 f-electrons to the oxygen ions, thus preventing the formation of V-center like defects in glass. At the same time, the Ce3+ ions, now holding positive holes as the result of their lending their 4 f-electrons to the oxygens, catch the ionized electrons that would be trapped or were already trapped by oxygen ion vacancies, thus preventing the formation of F-center like defects in glass. The total function of the Ce3+ ion in glass under γ-ray irradiation is, therefore, the recombination of the positive holes and the ionized electrons, thus preventing the formation of color centers.
著者
佐藤 潤四郎
出版者
公益社団法人 日本セラミックス協会
雑誌
窯業協會誌 (ISSN:00090255)
巻号頁・発行日
vol.63, no.704, pp.39-42, 1955-01-01 (Released:2010-04-30)
参考文献数
16
著者
日野 博夫
出版者
公益社団法人 日本セラミックス協会
雑誌
窯業協會誌 (ISSN:00090255)
巻号頁・発行日
vol.62, no.693, pp.163-178, 1954-03-01 (Released:2010-04-30)
参考文献数
46
被引用文献数
1
著者
稲田 博
出版者
公益社団法人 日本セラミックス協会
雑誌
窯業協會誌 (ISSN:00090255)
巻号頁・発行日
vol.86, no.990, pp.76-85, 1978-02-01 (Released:2010-04-30)
参考文献数
5
被引用文献数
1 2

(1) 陶磁器釉応力の室温から700℃までの変化を偏光装置付高温加熱顕微鏡を用いて測定した. 無貫入品はすべて同一傾向の変化を示した. 昇温とともに圧縮応力は減少し, 400-560℃のTSで応力0の横軸と交差してから, 引張り応力側で小さなピークを示した後, 620℃近辺のTRで再び応力0の横軸と交差し, 圧縮応力の小さなピークを示した後, 最後に670℃近辺で, 完全に応力が開放されて0となった. 貫入品は約530℃まで室温時の引張り応力の値がほとんど変わらずに推移した後, 応力は急減して約620℃のTRで応力0の横軸と交差し, 圧縮応力の小さなピークを示した後, 最後に670℃近辺で応力が開放され0となった.(2) 応力0の温度では, 釉と素地の寸法は等しいという仮定の下で, 素地の上に薄層でついている釉の熱膨張曲線を計算した. このようにして得られた曲線と, 素地の実測熱膨張曲線をTR点で重ね合わせることにより, 釉応力-温度曲線の変化過程を良く説明することができた.結局, 釉応力発生の起点は, 釉の最低なまし温度ではなく, 釉の転移温度より更に20-100℃高温のTR点とすべきことが分った. また, 素地の上に薄層でついている実際の釉は, かなりの変質をしているらしいことも推察された.
著者
富沢 俊昭 原 史郎 橋本 栄久
出版者
公益社団法人日本セラミックス協会
雑誌
窯業協會誌 (ISSN:18842127)
巻号頁・発行日
vol.84, no.970, pp.259-264, 1976-06-01
被引用文献数
2 4

The exothermic reaction observed in the thermal decomposition of basic magnesium carbonate was studied by DTA and X-ray.<br>The DTA taken in air and CO<sub>2</sub> shows occasionally a very sharp exothermic peak at about 500°C in addition to the rather broad endothermic ones.<br>The relative heights of the exothermic peaks depend on the experimental conditions such as the amounts of the samples, the atmosphere (air or CO<sub>2</sub>) and the amounts or kinds of the additives (alkali or alkaline earth halides), among the examined additives magnesium chloride showed a remarkable effect.<br>From these results of the analyses the decomposition process could be explained as follows. The crystalization of MgO proceeds slowly through amorphous state corresponding to the first endothermic peak up to above the exothermic peak. At 500°C, MgCO<sub>3</sub> is formed suddenly and the amounts of MgCO<sub>3</sub> are nearly proportional to the heights of the exothermic peaks emerged at this temperature. From above this temperature, however, MgCO<sub>3</sub> decomposes immediately into MgO.<br>The mechanism of these processes under various conditions are shortly discussed.