1 0 0 0 ケース研究

著者
家庭事件研究会 企画・編集
出版者
日本調停協会連合会
巻号頁・発行日
vol.(4), no.72, 1962-08
著者
長 純一
出版者
一般社団法人 日本内科学会
雑誌
日本内科学会雑誌 (ISSN:00215384)
巻号頁・発行日
vol.103, no.8, pp.1985-1990, 2014-08-10 (Released:2015-08-10)
参考文献数
5
著者
中西 麻美 稲垣 善之 深田 英久 渡辺 直史
出版者
日本森林学会
雑誌
日本森林学会大会発表データベース 第127回日本森林学会大会
巻号頁・発行日
pp.113, 2016-07-08 (Released:2016-07-19)

樹木の成長は土壌中の窒素や水分などの資源量と資源利用効率に影響を受ける。葉の窒素濃度は窒素吸収量の指標として、葉の炭素安定同位体比(δ13C)は水分利用効率の指標として用いられている。これらの指標を用いて窒素利用と水分利用がヒノキの成長量に及ぼす影響を高知県内の林齢28~73年のヒノキ人工林30林分で評価した。葉の窒素濃度は7.8~12.3mg/g、δ13Cは-28.4~-26.2‰を示した。窒素濃度とδ13Cには有意な関係は認められず、窒素濃度が高く、光合成活性が高い条件でδ13Cが増加する傾向は認められなかった。樹高成長量は0.08~0.53m/年、材積成長量は1.4~11.0Mg/ha/年を示した。林齢と窒素濃度を説明変数として成長量を予測する重回帰モデルでは、林齢が若く、生葉窒素濃度が高い林分ほど樹高および材積成長量が大きい傾向を示した。これらの重回帰モデルで、樹高成長量では53%、材積成長量では30%を説明できた。δ13Cと樹高や材積成長量には有意な傾向は認められなかった。したがって、高知県におけるヒノキの成長には窒素資源が重要であり、水分資源の制限は小さいことが示唆された。
著者
太田 啓介 久野 伸夫 衛藤 理砂 大野 誠 日吉 徹 吉次 通泰
出版者
一般社団法人 日本内科学会
雑誌
日本内科学会雑誌 (ISSN:00215384)
巻号頁・発行日
vol.91, no.5, pp.1601-1603, 2002-05-10 (Released:2008-06-12)
参考文献数
4

症例は44歳,女性.月経中にタンポンを使用していた所,嘔気,嘔吐,下痢,高熱,紅斑を来たし,短時間にショックに陥ると共に多臓器不全の様相を呈した.急性期に施行した咽頭,血液,尿培養は全て陰性であったが,月経血培養にて黄色ブドウ球菌が検出され,またエンテロトキシンB抗原が陽性であった.エンテロトキシンBが起因毒素と考えられるトキシックショック症候群の症例は稀であるため報告した.
著者
屋代弘賢
出版者
巻号頁・発行日
vol.五,
著者
広重
出版者
山田屋
巻号頁・発行日
1858

1 0 0 0 大分縣史料

出版者
大分県立教育研究所
巻号頁・発行日
1952

1 0 0 0 OA 通志200卷

著者
宋鄭樵撰
出版者
謝氏彷武英殿本刊
巻号頁・発行日
vol.[67], 1859
著者
皮籠石 紀雄 仮屋 孝二 中村 祐三 永野 茂憲 岩本 竜一
出版者
一般社団法人 日本機械学会
雑誌
日本機械学会論文集 (ISSN:21879761)
巻号頁・発行日
vol.83, no.855, pp.17-00274-17-00274, 2017 (Released:2017-11-25)
参考文献数
23
被引用文献数
2

Fatigue cracks in some aluminum alloys propagate not in a typical tensile mode with striations but in a macroscopic shear direction with ductile facets under specific conditions. In the previous paper, it was shown that this unique propagation of a shear mode crack occurred in high humidity under rotating bending fatigue and under ultrasonic loading fatigue irrespective of humidity. Two types of mechanism for the shear mode crack were proposed: one is a case that a slip deformation to one direction in cross slip in formation process of striation was enhanced by hydrogen generated in corrosion process of Al alloy in high humidity and the other is that a slip deformation of one direction was inhibited by the re-welding of crack faces in vacuum condition. In the present study, fatigue tests of Al alloys of extruded and drawn 2017-T4 and extruded 7075-T6 were conducted under rotating bending and ultrasonic loading conditions in relative humidity environments of 25% and 85% and in nitrogen gas, to verify the proposed mechanism experimentally and investigate influencing factors on the shear mode propagation. In addition, the effect of change in the testing condition on the propagation behavior of a crack was investigated. Although the microscopic shear mode propagation occurred within grains in both of the extruded and the drawn alloys, the crack propagated to a specific shear direction macroscopically in the extruded alloy related to the strong texture, and the crack propagated in a tensile mode macroscopically in the drawn alloy possessing no texture. These differences in macroscopic crack propagation mode, thus, were caused by the degree of texture. The proposed mechanism was verified by some experiments in various environments. Furthermore the effect of change in testing conditions influencing on the shear mode crack was explained by the results under the constant conditions.

1 0 0 0 OA 官報

著者
大蔵省印刷局 [編]
出版者
日本マイクロ写真
巻号頁・発行日
vol.1901年09月27日, 1901-09-27