著者
青木 祐介
出版者
日本建築学会
雑誌
日本建築学会計画系論文集 (ISSN:13404210)
巻号頁・発行日
vol.66, no.548, pp.251-256, 2001
被引用文献数
1 1

In the early Meiji (before the Shinto system revised in 1871) ,the new government had no clear vision for the building and repairs of shrines. When the new hierarchy of shrines had been established, the government had to make guidelines regarding building and repairing expenditure for the shrines directly controlled by the government. Meanwhile, Izumo-Shrine requested from the government again and again, funds not for repairs but for the whole reconstruction. Thus based on the financial state of the government, the area restrictions of shrines was suggested in 1872 by the Ministry of Finance.
著者
西山 徳明 三村 浩史
出版者
日本建築学会
雑誌
日本建築学会計画系論文集 (ISSN:13404210)
巻号頁・発行日
vol.60, no.474, pp.133-141, 1995
被引用文献数
15 3

This paper proposes the concept of "Landscape Management Planning" in a non-linear and spread villagescape area, which aims to not only realize a conservation of traditional structures but also assimilate impacts of local community's development. The contents of this paper are as follows. 1. Proposal of the analysis framework of landscape structure. 2. Representation of a landscape image which local people and government had been aim for. 3. Analysis on preferences of dwellers for the simulated future landscape images.
著者
樋口 貴彦 安藤 邦廣
出版者
日本建築学会
雑誌
日本建築学会計画系論文集 (ISSN:13404210)
巻号頁・発行日
vol.73, no.624, pp.303-310, 2008-02-28 (Released:2008-10-31)
参考文献数
18
被引用文献数
2

This paper is an analysis of the structural transition of wooden storehouses in the area around Mt. Yatsugatake. A few types of the structural characteristics can be seen in the same village, and in the same area. In previous studies, it was found that these types of the structural transition were caused by the development of lumbering techniques and changes in the way pine wood was used in the area. First we researched the distribution of wooden storehouses in this area and their details and found out that there were five types of structural characteristics among them. Second, we analyzed each type according to the characteristics of their walls: their lumbering techniques and the length of wood pieces and concluded that the structural types were decided on by a method to build a long wall according to lumbering techniques, We also found that there were some differences in the way of fixing pillars between eastern areas and western ones around Mt. Yatsugatake.
著者
近藤 靖史 長澤 康弘 張本 和芳 守屋 賢志
出版者
日本建築学会
雑誌
日本建築学会計画系論文集 (ISSN:13404210)
巻号頁・発行日
vol.67, no.557, pp.65-72, 2002
参考文献数
8
被引用文献数
8 6

Computational Fluid Dynamics (CFD) is one of the most useful techniques to predict the air distribution in air-conditioned and ventilated rooms. The supply airflow such as free jet, wall jet and combined flow of these jets has a great influence on the air distribution in rooms. Most of supply air diffusers have complex geometry, however, the shape of diffuser is usually oversimplified in CFD with coarse grids system. The results of such simulation may give incorrect prediction due to the poor modeling of diffusers. Even if the complex geometry of air diffuser can be described in detail, huge computer capacity and very long calculation time were required. In this paper, several modeling methods to simplify the boundary condition around air diffusers, such as BOX Method (P.V. Nielsen; 1976,1992) and P.V. Method (Prescribed Velocity Method, P.V. Nielsen et al.; 1980), are compared. These modelings require the distribution of air velocity, turbulence properties, temperature and concentrations around the diffuser beforehand. These data as the boundary condition for CFD with coarse grids can be obtained from the experimental measurement or the unstructured CFD simulation with fine meshes. In this paper, the full scale experiment was carried out at isothermal condition, and the airflow data around complex air diffuser installed at ceiling was obtained. With the basis of the flow data around the diffuser by the measurement, BOX Method and P.V. Method were applied to the air diffuser. The results of coarse grids CFD showed the good agreement not only around diffusers but in other part of rooms with the measurement.
著者
土本 俊和
出版者
日本建築学会
雑誌
日本建築学会計画系論文集 (ISSN:13404210)
巻号頁・発行日
vol.62, no.495, pp.239-246, 1997
被引用文献数
5 4

This paper traces some of the linkages between incendiarism and imposition via the example of Kyoto in the latter half of the sixteenth century. When Nobunaga moved into Kyoto in 1568, he began to ensure the feudal landowners their landholding. But he destroyod some area of Kyoto on fire in 1573. This incendiarism changed Kamigyo into the land with no productivity. Then he exempted them from the taxation and permitted town dwellers to rebuild their houses after the fire. The paper concludes that the incendiarism and the exemption made Kamigyo into the area without feudal landholding except by Nobunaga.
著者
柳田 良造
出版者
日本建築学会
雑誌
日本建築学会計画系論文集 (ISSN:13404210)
巻号頁・発行日
vol.77, no.673, pp.553-562, 2012
被引用文献数
1

The Modern age of Japan that started from the Meiji Restoration has important meaning in the history of development of wilderness reclamation and the formation of farm villages. This study clarifies the spatial characteristics, the formation, and the transition of the development of farm villages based on document investigation and field surveys through comparative analysis of a typical case that developed in the Modern Age in Hokkaido, Tohoku and the North Kanto region. It was an especially big discovery to be able to confirm the method of development of the farm villages in the Modern Age in Hokkaido, Tohoku and the North Kanto region that had been thought to be have developed previously through a different route and that there are a lot of simultaneities and common planning principles.
著者
宮野 和樹 桝田 佳寛 中村 成春 五味 信治
出版者
日本建築学会
雑誌
日本建築学会構造系論文集 (ISSN:13404202)
巻号頁・発行日
vol.69, no.575, pp.1-6, 2004
被引用文献数
1 1

The influence of quantity and shape of coarse aggregate and flowability of mortar on flowability of self-compacting concrete is investigated in this study. The coefficient of thickness of mortar layer is introduced based on coefficient of coarse aggregate's shape, quantity of coarse aggregate and solid content in coarse aggregate. The coefficient of coarse aggregate's shape is introduced by projection circumference, projection area, volume and grading of coarse aggregate. The flowability of self-compacting concrete can be estimated by coefficient of thickness of mortar layer and flowability of mortar.
著者
峰岸 隆
出版者
日本建築学会
雑誌
日本建築学会計画系論文集 (ISSN:13404210)
巻号頁・発行日
vol.65, no.537, pp.303-310, 2000
被引用文献数
1 1

This paper analyzes design of corridors by Sanpai-jiku(axis of visit a shrine) .The way was used an index construction of Shaden (a Shintoism shrine) and a lay of the land as well as construction's approach to a shrine at Sanpai-jiku. The result,the design of corridor's opening direction was shown this trend by Honden's sense of arrangement distance. 1. The design of corridors placed in near Honden(a Shintoism main shrine) are 「Soto-muki (corridor's opening direction is an approach to a shrine side)」「Ryo-muki (corridor's opening direction is an approach to a shrine side and Honden side)」 and 「Uti-muki (corridor's opening direction is Honden side)」. 2. The design of corridors placed in middle of precincts are 「Ryo-muki」 and 「Ryo-toji (an approach to a shrine side and Honden side of corridor are closed)」. 3. The design of corridors placed in far from Honden is 「Uti-muki」. Floor finishing of condors are, 1 and 2 were flooring and 3 was an earth floor.
著者
今井 和正 是永 健好 瀧口 克己
出版者
日本建築学会
雑誌
日本建築学会構造系論文集 (ISSN:13404202)
巻号頁・発行日
vol.67, no.562, pp.99-106, 2002
被引用文献数
6 4

When reinforced concrete members are subjected to bending moment, rotational deformation occurs in their ends. That deformation is generally considered to result from a slip of longitudinal bars, and some methods to estimate the rotational angle have been proposed. On the other hand, although a phenomenon that the members subside into the beam-column joints is observed, it has not been investigated. In this paper, it is insisted that the deformation results from a reciprocal action of the subsidence and the slip. A model to estimate the rotational angle considering the subsidence is proposed, and it gives good agreement with test results.
著者
十亀 昭人
出版者
日本建築学会
雑誌
日本建築学会計画系論文集 (ISSN:13404210)
巻号頁・発行日
vol.64, no.518, pp.167-172, 1999
被引用文献数
1

This study describes a conceptual design on centrifugal facilities as lunar base construction with a brief genealogy of space architectures as an introduction. A concept of centrifugal facility for simulating 1-gravity environment is proposed in this paper. The feasibility of the design of the centrifugal facility with two types of constructions, which have paraboloidal floor surface and a linear motor car, is investigated. The technical break-through for the lunar development is also discussed.
著者
高 娟淑 久野 覚 原田 昌幸 中山 和美 飯村 龍
出版者
日本建築学会
雑誌
日本建築学会環境系論文集 (ISSN:13480685)
巻号頁・発行日
vol.74, no.638, pp.427-433, 2009-04-30 (Released:2009-11-24)
参考文献数
15
被引用文献数
2 1

In this study we examined ventilation in summer and solar insolation in winter as elements of the indoor environment, with the objective of analyzing the seasonal characteristics of thermal environment evaluation as well as identifying how particular characteristics of space affect the evaluation of the thermal environment. The results were as follows. We found that in summer, feelings of discomfort disappeared even at the high indoor temperature of 33°C when a breeze of at least 0.6 m/s was present. In winter, some subjects expressed a desire for the temperature to be raised while others desired it to be lowered, with a neutral temperature of 23-25°C. We found that subjects' degree of satisfaction to exposure to sunlight was “just right” at temperatures over 25°C, with dissatisfaction at the amount of sunshine being eliminated. During winter, by moving into and out of sunlit areas, subjects created a transient thermal environment in which they actively enjoyed temporary pleasant sensations even in high temperatures.
著者
藍澤 宏 讃岐 真哉 鈴木 直子 山下 仁
出版者
日本建築学会
雑誌
日本建築学会計画系論文集 (ISSN:13404210)
巻号頁・発行日
vol.63, no.507, pp.143-149, 1998
被引用文献数
12 7

This paper analyzes the regional resource structures and the settlement types of settlement recommended by local government, in order to search for the characteristics of settlement by regional resources and to compare it with general settlement patterns. The results are as follows : 1) Basic economy and basic life resources are the same, but the form of regional resources are different. 2) Settlements which have high levels of economic and life resources and those that indicate such potential exist in all regional areas. 3) The characteristics of each location are different, and they clearly show unused resources that could be utilized.
著者
中島 直人 西村 幸夫
出版者
日本建築学会
雑誌
日本建築学会計画系論文集 (ISSN:13404210)
巻号頁・発行日
vol.67, no.557, pp.241-248, 2002
参考文献数
48
被引用文献数
3

In the first half of 1930's, the Society of Civic Art made the epochal proposals to establish the municipal art commission in Tokyo. This paper is to review the process of making the first proposal (1930) and the second proposal (1934). Specifically, this paper is to focus on : 1)contacts with art commissions of cities in the United States and their direct influence, and 2)changes of relation between the Society of Civic Art and Tokyo City Government under the movement, which motivated by Tokyo City Government in this period, for realization of Tokyo metropolitan system.
著者
知花 弘吉
出版者
日本建築学会
雑誌
日本建築学会計画系論文集 (ISSN:13404210)
巻号頁・発行日
vol.69, no.576, pp.25-30, 2004
参考文献数
13
被引用文献数
3

This research is based on the results of the questionnaire survey on the relationship between the autistic person's behavioral disorder and their living space. The results are as follows.: (l).The Autistic person's behavioral disorder often accompanies damage to property.; (2).Guidance counsellors are unable to do preventative counselling. They are only able to counsel after the autistic person has behavioral problems.; (3).The autistic person is prone to accidents indoors. Most injuries involve fractures and laceration.; (4).Damaged areas are typically windows, doors and walls.; (5).The autistic person can only concentrate on places or objects he/she prefers.
著者
入江 徹
出版者
日本建築学会
雑誌
日本建築学会計画系論文集 (ISSN:13404210)
巻号頁・発行日
vol.67, no.551, pp.329-334, 2002
被引用文献数
1

This is a study on the exhibition "DECONSTRUCTIVIST ARCHITECTURE" in the Museum of Modern Art on 1988.6.23-8.30 and its background. The purpose of this research is that will make investigation into of the truth about the relationship between J. Derrida and architectural field, between his philosophy "Deconstruction" and architecture. There were some events before the exhibition. In 1986 the exhibition"Violated Perfection" was held in University of Illinois at Chicago. Since 1985 P. Eisenman and Derrida worked together on a section of Tschumi's Parc de La Villette project. The name of the work is Choral Work. Yet in 1988 international symposium on Deconstruction was held by Academy Editions at the Tate Gallery. After going through their events MoMA held the exhibition "DECONSTRUCTIVIST ARCHITECTURE" The method of this research is to investigate the process and cause through the historical discourses and correspondence between them at the time. Through the research on the exhibition and its background, this study will make investigation into of the truth about the relationship between Derrida and architectural field, between his philosophy and architecture. Deconstruction was referred to as the theory to express one of the architectural tendency on 1980's. As a result, especially the exhibition "DECONSTRUCTIVIST ARCHITECTURE" led "Deconstruction" to a fixed image.
著者
孫 玉平 崎野 健治 吉岡 智和
出版者
日本建築学会
雑誌
日本建築学会構造系論文集 (ISSN:13404202)
巻号頁・発行日
vol.61, no.486, pp.95-106, 1996
被引用文献数
6 9

<p>1. 序 本論文の研究目的は、1) 図1に示す横補強筋により拘束されたコンクリートに対して著者らが提案した応力・ひずみ関係モデルが、他のモデルとの比較の上において、RC柱の中心圧縮性状のみならず図2に示す応力を受ける柱の曲げ性状の予測にも用い得るかどうか、2) それが適切に出来ない場合は、必要な修正法を検討することである。 2. コンクリートの応力・ひずみ関係 著者らにより提案されたコンファインドコンクリートの応力・ひずみ関係は(1)式により表される(図3参照)。(1)式中の3つのパラメーター、すなわち、(1)コンファインドコンクリートの強度fcc^1、(2)強度時ひずみεco、(3)下り勾配に関系するパラメーターD、はそれぞれ(2)、(3)、(4)式により与えられる。提案モデルと中心圧縮実験結果との比較を図4に示す。図4には比較のためにSheikh、Manderら、六車らにより提案されたモデルと修正Kent & Parkモデルも一緒に示してある。図4から分かるように、著者らの提案したモデルが最もよく実験結果と一致する。 3. 鉄筋コンクリート断面の曲げ挙動 3.1 解析方法と結果の検証 軸力と曲げを受ける鉄筋コンクリート断面の曲げモーメント曲率関係は次の仮定をおくことにより解析的に求めることができる。(1)平面保持の仮定、(2)主筋は完全弾塑性体とする、(3)コンクリートの引っ張り強度は無視、(4)コンクリートの応力・ひずみ関係は(1)〜(4)式により表される、(5)無拘束のかぶりコンクリートは、0.004以上のひずみを生じた場合は応力を負担しない。 断面と軸力が与えられた場合の曲げモーメント・曲率関係(以下M-φ関係と書く)は、断面を図5に示すように分割して数値積分を行う断面分割法により比較的簡単に求める事が出来る。 解析的に求めたM-φ関係と、一定軸力下で均等曲げモーメント(図2(b)参照)を受ける鉄筋コンクリート柱の実験により得られたM-φ関係の比較を図6に示す。図6から分かるように、低軸力を受ける試験体については提案モデルと他のモデルによる解析結果に殆ど差がないが、高軸力を受ける試験体については、提案モデルを用いた解析結果が最大曲げモーメントも大曲率時の挙動も実験結果を最もよく説明できることが分かる。 3.2 数値計算による検討 軸力の大きさと横補強筋の拘束度合いが高強度鉄筋コンクリート断面のM-φ関係に及ぼす影響を定量的に検討するために、図7に示す断面について数値計算を行った。解析により求めたM-φ関係とM-ε_<ce>/ε_<co>関係を強度上昇係数K (=f_cc'/f_c')と軸力比n (=N/Agf_c') をパラメーターにとり図8に示す。ε_<ce>はコンクリートの圧縮縁のひずみであり、ε_<co>はコンクリートの最大応力時のひずみで(3)式で与えられる。 図8より分かるように、無拘束断面のM-φ関係にはピーク点が1つしかない。しかしながら、横補強筋がある場合はピーク点が2つ表れるようになる。かぶりコンクリートの最外縁が剥離をし始めた時に断面は最初のピークモーメント(以後M_<pp>と書く)に達し、その後コアコンクリートに対する拘束効果が効き始めるまで曲げモーメントは低下する。その後再び曲げモーメントが上昇して第2のピークモーメント(以後M_<cp>と書く)に達する。横補強筋で拘束された鉄筋コンクリート断面の最大曲げモーメントを求めるためには、M_<pp>とM_<cp>の2つのピークモーメントを求める必要がある。 4.曲げ終局強度 本節においては、曲げ終局強度をより簡単に求める略算法を提案する。この簡略化は、圧縮誠におけるコンクリートの実際の応力分布を、圧縮縁からβXの距離の所に合力C(=αf_<cc>'/BX)が作用する等価な長方形分布のストレスブロックに置き換えることによってなされる(図9参照)。 圧縮縁ひずみがε_<ce>の時の実際の応力分布と等価な長方形ストレスブロックのパラメーターαとβを求める一般式は、両者の合力と一次モーメントが等しいという条件より(5)式により与えられる(図9参照)。柱断面の曲げ終局強度を評価するときは、一般的なαとβの値ではなく、コンクリート圧縮縁のひずみがε_<cm>というある特定値に達した場合の値が必要となる。M-φ関係における最大曲げモーメント時のコンクリートの圧縮縁のひずみを本論文では終局ひずみと呼ぶことにする。主筋や横補強筋のない無筋コンクリート断面の場合で中立軸の位置が断面内にある場合は、ストレスブロックパラメーターβとαの比が最小になるときに最大曲げモーメントに達することが証明できる。図8には鉄筋コンクリート断面のM-ε_<ce>/ε_<co>が示されているが、図中にβとαの比が最小になった時のがξ(=ε_<ce>/ε_<co>)の値を一点鎖線で示している。無拘束コンクリートの場合もコンファインドコンクリートの場合もβとαの比が最小になった時、ほぼ最大曲げモーメントに達すると見なして差し支えないことが図より分かる。したがって、終局ひずみε_<cm>の算定式として(6)式を提案する。(6)式で与えられる終局ひずみ時のαとβの値をα_mとβ_mとすると、近似的に(7)式(8)式により与えられる。 また、(9)式で拘束鉄筋コンクリート柱断面のMppとMcpを求める際に、断面圧縮縁や断面せいhなどの取り方については図10を参照されたい。 5. 鉄筋コンクリート柱の曲げ挙動 本節においては、実験において直接測定された材端の塑性ヒンジのM-φ関係と3節で述べた解析により得られたM-φ関係の比較をまず行うことにする。図11と図12にSheikhらおよび六車らによって得られた片持ち柱の塑性ヒンジ領域のM-φ関係実験値と解析値の比較を示す。いずれの実験においても、正負交番繰り返し実験が行われているが、図11と図12にはM-φ関係の正荷重時包絡線が実験値として示されている。M-φ関係実験値の曲げモーメントの値は軸力による付加曲げモーメントを含んだ材端(スタッブに隣接する断面)の曲げモーメントであり、また、曲率は塑性ヒンジ領城中の平均曲率である。いずれの試験体においても、曲げ終局強度実験値は解析値よりも大きいことが分かる。この主な原因、材端スタッブの拘束により危険断面が材端よりも曲げモーメントが小さい柱の内部へ移ったためと考えられる。もう一つの原因としては、主筋のひずみ硬化の影響が考えられる。本論においては、軸力と曲げせん断を受ける柱の材端の曲げ終局強度と第4節で提案した方法で求めた曲げ終局強度計算値の比を強度上昇比と定義して、これを既往の実験データを用いて定量的に求めることにする。 強度上昇を求めるために用いた実験資料の概要を図13に示す。実験資料としては、文献(1)で用いられた中心圧縮試験体の資料の場合と同じく、一辺の長さが200mm以上の正方形断面試験体に限定した。すべての試験体は軸力・曲げせん断を受けて曲げ破壊したと報告されている試験体である。図14に強度上昇係数に関する実験値(M_<uexp>/M_<cal>)と軸力比の関係を示す。 解析値としては提案法以外にACI規準法と日本建築学会の略算式を用いた場合の結果も参考のために図14に示している。曲げ終局強度実験値M_<exp>は部材角が0.02rad以内で観測された正荷重時の材端モーメントの最大値でN-δモーメントも含んでいる。 第4節で提案した方法で求めた曲げ終局強度としてはM_<pp>とM_<cp>のうち大きい方を取った。図14中黒い四角で示している試験体はM_<cp>>M_<pp>となった試験体で、直線型横補強筋の拘束により曲げ終局強度の上昇が期待できたと思われる試験体である。図14から分かるように、強度上昇係数は軸力比に強く依存する。この原因は、軸力が大きくなるほど中立軸深さは深くなり、コンクリートの性状に依存することになり、スタッブ拘束の効果がより大きく表れるためと思われる。曲げ強度上昇比は(10)式により与えられる。(10)式は図14に示す実験資料を用いた回帰分析により得られたものである。ここで、M_<u. cal>ま軸力と曲げせん断を受ける柱の材端の曲げ終局強度計算値、M_<cal>は第4節で提案した略算法による計算値である。図15に示すようにコンクリートの圧縮強度、主筋の降伏応力度、せん断スパン比に関わらずM_<u. exp>/M_<u. cal>の値はほぼ一定で、平均値と標準偏差はそれぞれ1.00と0.07となる。 6.結論 1) 直線型横補強筋で拘束されたコンクリートの応力・ひずみ関係について提案された、著者らのモデルも含む5つのモデルについて比較研究を行った。高強度コンクリートを用いた中心圧縮柱、および軸力と曲げモーメントを受ける柱に関する既往の実験結果との比較により、低軸力を受ける柱と横補強筋による拘束が強い柱の場合は5つのモデルともほぼ同じ</p><p>(View PDF for the rest of the abstract.)</p>
著者
菊地 淑人
出版者
日本建築学会
雑誌
日本建築学会大会学術講演梗概集
巻号頁・発行日
pp.883-884, 2011-08

2011年度日本建築学会大会(関東)2011年8月23日~25日 於:早稲田大学