著者
滝川 敏明
出版者
公正取引協会
雑誌
公正取引 (ISSN:04256247)
巻号頁・発行日
no.672, pp.38-47, 2006-10
著者
川本 直
出版者
新潮社
雑誌
新潮
巻号頁・発行日
vol.108, no.10, pp.224-227, 2011-10
著者
川本 直
出版者
新潮社
雑誌
新潮
巻号頁・発行日
vol.112, no.5, pp.178-181, 2015-05
著者
魯 惠卿
出版者
国文学研究資料館
雑誌
国際日本文学研究集会会議録 = PROCEEDINGS OF INTERNATIONAL CONFERENCE ON JAPANESE LITERATURE (ISSN:03877280)
巻号頁・発行日
no.21, pp.37-54, 1998-10-01

Izumi Kyoka based "Tsunbo no Isshin " on his late father Kiyotsugu, and the depiction it gives us of Kyoka's state of mind in the wake of his father's death makes the work an important one. The author's original text, with corrections added by Ozaki Koyo, is among the archives of Keio Gijuku Library. Ozaki's corrections are numerous, but no research has yet been done on the nature of these corrections. A comparison of Kyoka's uncorrected hand-written text with the published corrected version is essential if we are to understand Kyoka's original intentions, as well as the process by which the work subsequently developed.Ozaki's corrections range from punctuation, and kana added to Chinese characters, to alterations to the content of the work itself. I shall concentrate on the latter, which may be characterized in two ways. Firstly, changes were made to the nature of the narrative. "Tsunbo no Isshin" is a first-person narrative, but the narrator (yo) is also the doctor supervising "Isshin" who is a craftsman. While Kyoka's hand-written text describes the psychology and behaviour of the narrator, who sympathizes with Isshin and his family, the version corrected by Ozaki tends to delete much of this, simplifying the relationships between characters. In Kyoka's text, as well as a portrayal of Isshin, there is also detailed description of the tender attachment between Okoma and the narrator, and the filial devotion of Okoma's younger brother. By contrast, Ozaki's corrected version concentrates mainly on Isshin's behaviour and his attitude to his work in the period leading up to his death. Ozaki's decision to change the original title of the work, "Kame no Saiku" to "Tsunbo no Isshin", illustrates this.I would like to consider the above points, and to elucidate what it was that Kyoka attempted to describe in his original text, his feelings for his late father, and the processes of the work's formation.
著者
増田 悦夫
出版者
国立研究開発法人 科学技術振興機構
雑誌
情報管理 (ISSN:00217298)
巻号頁・発行日
vol.60, no.11, pp.788-797, 2018

<p>第4次産業革命を推進する取り組みが進む中,ロジスティクス分野においても変革に向けた取り組みが積極的に進められている。人手不足や非効率な業務に悩まされているロジスティクス業界にとって,IoTやAI,ロボットなどの技術を取り入れたスマート・デジタルロジスティクスに対する期待は大きい。輸送や物流拠点における省力・省人化やサプライチェーンの最適化のための施策やそれを実現するためのロードマップが策定されるとともに,それに沿った取り組みが始まりつつある。民間企業においても,物流拠点における搬送やピッキングを行うロボットの導入,ラストマイルにおけるドローン配送の実験,サプライチェーンを最適化するためのソリューションの提供などが活発に行われている。人手不足,特にトラックドライバーの不足は深刻であり,隊列走行や自動運転の実用化に向けた取り組みが急ピッチで進められている。</p>
出版者
日経BP社
雑誌
日経コンストラクション (ISSN:09153470)
巻号頁・発行日
no.292, pp.16-17, 2001-11-23

東京都町田市が発注した土木工事や建築工事,舗装工事で談合を繰り返していた88社に対し,建設業の許可を与えている国と東京都は,2001年5月11日から15日間の営業停止を命じた。88社はすべて町田市内に本社を置く建設会社。
著者
狐塚 寛
出版者
公益社団法人 日本アイソトープ協会
雑誌
RADIOISOTOPES (ISSN:00338303)
巻号頁・発行日
vol.23, no.2, pp.117-125, 1974-02-15 (Released:2010-07-21)
参考文献数
62
被引用文献数
2 2
出版者
日経BP社
雑誌
日経コンストラクション (ISSN:09153470)
巻号頁・発行日
no.294, pp.50-53, 2001-12-28

事故の概要:2001年8月1日,山形県鶴岡市の千歳橋上部工事の現場で,架設中のPC桁が横取り装置もろとも川に落下した。落下したのは,10本設置する桁のうち最初に架設する1本事故の主因:橋桁を横取り装置にセットする際,桁の重心線と横取り装置のノーズの位置がずれていたので,移動時にバランスを崩した事故の遠因:作業を担当した元請け会社の職員に,装置を扱った経験者がいなか…
著者
Shiho Miyazaki Masahiro Kusano Dmitry S. Bulgarevich Satoshi Kishimoto Atsushi Yumoto Makoto Watanabe
出版者
The Japan Institute of Metals and Materials
雑誌
MATERIALS TRANSACTIONS (ISSN:13459678)
巻号頁・発行日
vol.60, no.4, pp.561-568, 2019-04-01 (Released:2019-03-25)
参考文献数
31
被引用文献数
17

The selective laser melting could be employed in fabrication of near-net shape products for airplane and biomedical applications from Ti–6Al–4V alloy, which is difficult-to-process material. In this method, the localized laser irradiation forms the unique Ti–6Al–4V microstructures which correspond to the laser scanning patterns and local thermal history as it could be observed from sample cross-sections with OM or SEM. In this study, the effects of heat treatments on mechanical properties of Ti–6Al–4V samples produced by selective laser melting are discussed based on quantitative analysis of microstructures with image processing and machine learning tools. It was found that microstructures of heat-treated samples retained their original morphologies and secondary α phase precipitated regularly at β grain boundaries with increased treatment time. These microstructures were appropriately segmented and classified. Each α particle geometrical characteristics were successfully extracted and evaluated by image analysis. Importantly, the hardness of the heat-treated samples was lower compared to that of as-built ones and it tended to increase with the area fraction of α phase, the α particle width, and the nearest neighbor distance between α particles.