著者
武尾 実 三上 直也
出版者
東京大学地震研究所
雑誌
東京大学地震研究所彙報 (ISSN:00408972)
巻号頁・発行日
vol.65, no.3, pp.p541-569, 1990-12
被引用文献数
4

Detailed rupture processes of six intraplate earthquakes in Japan, the 1961 Kitamino earthquake, the 1969 GifuKen-Chubu earthquake, the 1974 Izu-Hanto-Oki earthquake, the 1975 OitaKen-Chubu earthquake, the 1980 Izu-Hanto-Toho-Oki earthquake, and the 1984 NaganoKen-Seibu earthquake, are compiled and compared to each other to make clear common features of an earthquake rupture process. The rupture processes are obtained by waveform inversion using strong motion seismograms in previous studies. Five of these rupture processes are also compared with distributions of precisely determined aftershocks. Earthquakes with relatively smooth rupture propagation, such as the 1974 Izu-Hanto-Oki earthquake and the 1961 Kitamino earthquake, represent smoother slip distribution than earthquakes with relatively irregular rupture propagation, such as the 1969 GifuKen-Chubu earthquake and the 1980 Izu-Hanto-Toho-Oki earthquake. It is also recognized that aftershocks of magnitude greater than 4 do not occur in the large slip area. Most large aftershocks take place near the edge of the large slip region and in the small slip region. Aftershocks also tend to cluster near the edge of the large slip region. These results are very consistent with numerical experiments of dynamic rupture, so it is suggested that the relation between aftershocks and coseismic slip pattern obtained in this paper hold generally for earthquake rupture processes. A clear delay of rupture propagation occurs in the large slip area during the 1969 GifuKen-Chubu earthquake: on the other hand, the small slip area in the 1980 Izu-Hanto-Toho-Oki earthquake is characterized by a deceleration of rupture propagation. The large slip area in the former case is interpreted as a barrier which resisted fracturing at first and was broken with a high stress drop. In the latter case, mechanical weakness due to volcanic structure located around the source region, seems to have affected the rupture process. A similar geological condition may have affected the rupture process of the 1978 Izu-Oshima-Kinkai earthquake which occurred about 10 km south of the 1980 Izu-Hanto-Toho-Oki earthquake.日本内陸で発生した6つの地震について,詳細な破壊過程を取りまとめ,それらの相互の特徴及び余震分布との対応等を調べた.取り上げた地震は1961年北美濃地震・1969年岐阜県中部地震・1974年伊豆半島沖地震・1975年大分県中部地震・1980年伊豆半島東方沖地震及び1984年長野県西部地震である.これらの地震については,震源近くで記録された強震計記録の波形インバージョンにより,詳細な破壊過程が解明されている.
著者
田口 正 戸田 昭三
出版者
公益社団法人日本分析化学会
雑誌
分析化学 (ISSN:05251931)
巻号頁・発行日
vol.38, no.6, pp.T89-T93, 1989-06-05
被引用文献数
1 2

キャピラリー超臨界流体クロマトグラフィーを極性化合物分析へ応用した。移動相には高純度C02、カラムにはポリジメチルシロキサンを固定相とした溶融シリカキ十ヒラリーを用いた。カラム温度は100℃、水素フレームイオン化検出器(FID)の温度は350℃、そしてカラム圧力を150から400気圧に変化させ条件設定を行った。ポリエチレングリコールアルキルフェニルエーテル(TrittonX-100)について昇圧条件を一定にし、カラム温度を変化させると、保持時間が溶媒と試料とで相反した挙動を示し、試料のピーク形状も大きく変化することが分かった。Tritin X-100について5回測定したときの測定精度を相対標準偏差で表すと、保持時間が0.5%以下、ピーク高さが6.3%となり良い再現性が得られた。極性物質であるメタクレゾールノボラックオリゴマーについてトリメチルケイ素化剤を用いて誘導体化を行い超臨界流体クロマトグラフ分析したところ、誘導体化前に見られたピークは更に幾つかに分離し、分子の立体構造を推定するうえで貴重なデータが得られた。
著者
江藤 慶一 伊藤 延久
出版者
日本作物学会
雑誌
日本作物学会九州支部会報 (ISSN:02853507)
巻号頁・発行日
no.17, pp.36-39, 1961-10-25

最近水稲早期米の精白歩合・食味など品質に関して批判の声が高まっている。しかし早期栽培は試験研究の日なお浅く,品質特に食味についての研究は比較的に少ないようである。そこで私達は早期米の品質改善対策の基礎資料を得るため,早期米7品種について玄米の藷特性・精白歩合・食味等予備的な調査を行なったので,その概要を報告する。
著者
永村 悦子 中根 芳一 永村 一雄 中谷 明男 三木 信博
出版者
社団法人空気調和・衛生工学会
雑誌
空気調和・衛生工学会論文集 (ISSN:0385275X)
巻号頁・発行日
no.59, pp.105-116, 1995-10-25
被引用文献数
4

大阪(新版),奈良,金沢,輪島の標準気象データ平均年を作成し,これらに従来の大阪平均年,富山平均年を加えて,各要素の日平均値の年間変動,平均的日変動,頻度分布による各地の気候特性の比較検討を行った.その結果,大阪(新)の水平面全天日射量が大阪(旧)よりも大きく,7月には月積算値で約130MJ/(m^2・月)もの差異がみられた.また水平面全天日射量の頻度分布では,大阪(新),奈良とも最大30MJ/(m^2・日)近くまであるのに対し,大阪(旧)では,水平面全天日射量24MJ/(m^2・日)以上の頻度がゼロとなっている.さらに,奈良の気温はほぼ1年を通して大阪よりも約2℃低く,金沢では輪島,富山よりも1〜3℃高いことがわかった.
著者
浜野悠介 高橋伸 田中二郎
雑誌
第75回全国大会講演論文集
巻号頁・発行日
vol.2013, no.1, pp.89-90, 2013-03-06

物の重さは容易に取得することができ、変化が少ないことから物を特定する情報として有用であると考えられる。あらかじめ物の重さを一つずつ量っておくことで、持ち物全体の重さに近い組み合わせを推定することができる。そこで、本研究では秤を用いて物の重さを取得し、その重さから持ち物の組み合わせを推定するシステムを開発した。本システムは、鞄などをフックにつるすとその中に入った持ち物を推定して表示する。本システムを利用して持ち物の組み合わせを半自動的に確認することができれば忘れ物防止に役立つと思われる。
著者
岡田 昌史 茂木 祐一 山本 江
出版者
一般社団法人 日本ロボット学会
雑誌
日本ロボット学会誌 (ISSN:02891824)
巻号頁・発行日
vol.32, no.1, pp.45-54, 2014 (Released:2014-02-15)
参考文献数
13

In this paper, we develop a model of the behavior of visitors in an exhibition space, and design an amenity space to reduce congestion. Because the flow of visitors depends on the space layout, it is possible to reduce the congestion by changing the layout of exhibits. To deal with the congestion, a macro model of visitors is required. The flow of visitors is modeled by two-dimensional vector field and the individual behavior is represented by the dynamic model including collision avoidance of individuals. To model walking and stopping behaviors, we introduce an extended dimensional space where the extra coordinate represents the viewing time of each exhibition. The parameters in the proposed model are identified from the measured data of human flow line. To reduce the congestion, the layout of exhibits is optimized based on the proposed model by minimizing the collision avoidance vector. The proposed method is verified by simulations and experiments using swarm robots, which consist of autonomous mobile robots and radio controlled robots.