著者
島村 泉里
雑誌
JpGU-AGU Joint Meeting 2020
巻号頁・発行日
2020-07-04

空気抵抗の大きさを求める1つの要因に抵抗係数というものがあげられる。しかし、現在抵抗係数は実験から得る以外の方法で数値をわり出すことはできていない。そこで、本研究対象である抵抗係数についての知見を得るため、最初に、形状の違いによる空気抵抗の大きさの変化を、地上15.75m(本校5階)から物体を落下させることにより比較した。実験1として体積の等しい「立方体・四角錐・円錐・球」の4種類(表1)を木材から切り出し、落下させた。しかし、物体の形状の種類と実験数が不足していたこと、更に使用した木材の密度が一定ではなく形状が不精密であったこと、そして落下時に水平方向の軸を中心とする回転をしてしまったことにより結果が不正確であった。これらの点を克服するため、実験2として実験1と同様に体積の等しい「球・円錐・四角錐・円柱・直方体・立方体」の6種類(表1)の物体を3Dプリンターを用いて作成した(フィラメントとしてPLA樹脂を使用し、後述の実験3も同様である)。そのうえで物体の中心に穴をあけナイロン製のヒモを通すことによって回転を抑えた。実験1,2から、前面の形状が球形の時最も抵抗が小さく、次いで錐形、そして平面の順に大きくなるという結果を得ることができた。 角錐と円錐間・立方体と直方体間では共に、落下にかかる時間の差は前面投影面積の差以外による影響は極めて小さいと判断できた。この結果は、高等学校や大学等で用いられる力学や流体力学の参考書等に記載されている抵抗係数から算出できる抵抗の値の大小関係と一致する。また、実験2において落下をさせた6種類の形状のうち、双方とも先端は球形ではあるものの飛行機や新幹線等の先端等、日常生活の中で最も利用頻度が高く、形状のパターンを複数作成することが容易である円錐に焦点を当てた。そこで、頂角の大小変化に伴う抵抗係数の変化を「静止した物体に流体を当てる方法」、「終端速度から抵抗係数を求める方法」による2つの実験(それぞれ実験3,4とする)からそれぞれ算出する。実験3では3Dプリンターを用いて作成した中心角(頂角の半分)の異なる8種類(表2)の物体をそれぞればねばかりで吊るし、物体より一定距離離した位置から水を自由落下させ、その際物体にかかった圧力 をグラム重単位で物体にかかる力を計測し、そこから圧力を算出した。実験結果から抵抗係数を算出し、中心角の変化と対応するグラフを作成した(図1)。図1では中心角の増加に伴い抵抗係数(Cd)が指数関数的に増加する曲線に近似した。また、実験にて得られた抵抗係数を関数表示ソフト(FunctionView Ver 6.02)上に表示し 、近似する関数を推定し次の式を得ることができた。(θは中心角の大きさ(rad)を表す)Cd=0.36+1.2exp[4.2{θ-(π/2)}]この関数は指数関数であるため実際に使用する際の代入計算が煩雑であり、近似式の確度の確認がとれていない。計算の煩雑さを軽減し、標準偏差を用いてより確度の高い式の推定を行うために、対数を取り1次近似を行う。また、実験3で得られた抵抗係数の値は上記の参考書等に記載されている値よりも低い値となっていた。この原因としては落下させた水の出水口の面積が物体の前面投影面積よりも小さくなってしまったことや、流体の中で物体が移動する場合と停止した物体に流体を当てた場合では、かかる力に変化があるのではないかと考えられる。そのため、水中で物体を落下させる実験の実施を検討している。円錐に焦点を当てた次の実験4として、厚さが一様なコピー用紙(PPC用紙)を用いて頂角の異なる錐形(底面なし)を作成し、可能な限り同じ環境で(著者宅内同地点にて)地上2.5mの高さから落下をさせ、終端速度に確実に達している地上2.0m地点から着地までにかかった時間を計測する。計測した時間から終端速度を算出し、抵抗係数を求める。頂角が大きくなると抵抗を受け、まっすぐ落下させることが困難になっていくため、指向性を持たせるために先端に落下速度に影響しない適度な重量のおもりをつけることによって安定を図る。実験4 でも実験3と同様に算出した抵抗係数と頂角の変化を対応させたグラフを作成し、関数ソフトにて近似するグラフの推定を行う。本研究では実験から求めることしかできない抵抗係数を数式によって算出できるようにすることを目標としている。
著者
吉川 翠
出版者
家屋害虫研究会
雑誌
家屋害虫 (ISSN:0912974X)
巻号頁・発行日
vol.17, no.2, pp.111-118, 1995-12-01
参考文献数
11

Ultrasonic flea-and-tick control devices have been marketed as repellents of mites in Japan since 1993. The efficacy of three types of devices was examined using three kinds of living mites : Dermatophagoides pteronyssinus (D. p.), Chelacaropsis moorei (C. m.) and Ornithonyssus bacoti (O. b.). A black flockpaper, 415mm in length and 50mm in width, was fringed by double-faced tape 15mm in width to avoid escape of mites. The length of the paper was divided into 8 sections of I -VIII, including one side of the tape as section I . Food for attracting mites was prepared on the tape of section I . Food was mixed powder for D.p., living cheese mites for C. m. and dry ice placed on cotton for 0. b. About 100 mites of D. p. starved for 24 hours were placed between 1V and V of a flockpaper. This paper was kept for 24 hours in a dark condition in a plastic cage in which an ultrasonic device was set over the food to expose I -IV. About 30 mites of C. m. starved for 24 hours were placed between IV and V to be exposed to ultrasound for 4 hours and 5-15 mites of O. b. starved for 2 weeks were placed between IV and V to be exposed for 3 hours. After exposure, the mites on each section were counted. The experiments on O.. p. and C. m. were repeated 5 times with each device and totaled in each section of each device, while that of D. b. was repeated 3 times and totaled in the same way. Sections I-IV and V-VIII for each kind of mite and device were added together and compared with the control which were done without the device in the same manner as with the device. Sections I-III, IV-V and VI-VIII for each kind of mite and device were also totaled to check mite movements and compared with the control. There was no significant difference in the number of any kind of mite between the exposure and control groups found on I -IV and V-VIII with any device. About 50% of D. p. were found on IV and V with each device also showing that mites of D. p. were not affected by the ultrasound while there were more C. m. and O. b. on I-III than on IV-V or VI-VIII being no efficacy of the sound with any device.
著者
水関 清
出版者
市立函館病院
雑誌
函館医学誌 = Hakodate medical journal (ISSN:09100725)
巻号頁・発行日
vol.30, no.1, pp.3-16, 2006-09
著者
向殿 政男
出版者
一般社団法人 映像情報メディア学会
雑誌
テレビジョン学会誌 (ISSN:03866831)
巻号頁・発行日
vol.44, no.9, pp.1218-1225, 1990-09-20 (Released:2011-03-14)
参考文献数
16

ファジィネスと呼ばれるある種のあいまいさの存在を始めから認めて, それを積極的に取り扱うための理論であるファジィ理論が, 最近, 注目を集めている.実際の場面で有効であることが実証されるようになったからである.本稿では, ファジィ理論の基礎についてわかりやすく解説する.さらに, 応用に関する最近の動向についても述べる.
著者
山下 洋史
出版者
日本経営倫理学会
雑誌
日本経営倫理学会誌 (ISSN:13436627)
巻号頁・発行日
vol.8, pp.143-149, 2001-03-31 (Released:2017-07-28)

In this paper, a behavioral entropy model on business ethics is proposed through the use of the information theory, and business ethics are expressed as 'lower entropy resources', The characteristic of the model is to suggest one of orientations on the roles which business ethics should fulfill. Based on this model, the roles of business ethics are discussed from the view points of the lower entropy resources.
著者
堀部 麻衣子
出版者
法政大学国文学会
雑誌
日本文学誌要 (ISSN:02877872)
巻号頁・発行日
no.83, pp.56-73, 2011-03
著者
作田 真由子 さくたまゆこ Sakuta Mayuko 沖縄キリスト教短期大学英語科教授 英文学
出版者
沖縄キリスト教短期大学
雑誌
沖縄キリスト教短期大学紀要 = Journal of Okinawa Christian Junior College (ISSN:03851745)
巻号頁・発行日
no.47, pp.5-15, 2018-01

ルネ・ジラールが、人間の「三角形の欲望」(「模倣の欲望」)について世人の注目をひいたのは『欲望の現象学』(1)においてであった。彼はセルバンテス、スタンダール、フローベール、プルースト、シェイク スピアなどの文学作品に現れたこの欲望の様々な例を指摘し、作品や、人間性の理解に大きく貢献した。この小論では、アメリカ文学史上有名な女性の主人公の欲望を、この視点から見つめることで作品の読み を深めたいと思う。René Girard pointed out that human desire is mimetic and that great writers such as Dostoevsky, Shakespeare, Cervantes, Flaubert and Stendhal described the mimetic desire in their master pieces. I have found that the heroine of Margaret Mitchel's novel"Gone with the Wind"has something similar to that kind of desire, though not exactly what Girard called"mimetic desire."In this paper, I have tried to grasp the nature of the heroine's desire with the aid of Girard's theory.
著者
石飛 太一 飯田 弘之
雑誌
ゲームプログラミングワークショップ2012論文集
巻号頁・発行日
vol.2012, no.6, pp.163-166, 2012-11-09

本論文では証明数を利用した詰将棋問題の感性評価について調査を行った.そこで,証明数と反証数についての統計情報を得るため,Allis(1994) によって提案されたProof-Number Search を利用し,コンテストにおける上位問題の分析を行った.また,上位入賞問題とその他一般問題について違いを調べ比較した.結論として,証明数と詰将棋問題の感性評価の間には一定の関わりがあることが分かった。
著者
Young-Han Park Jung-Ho Lee
出版者
The Society of Physical Therapy Science
雑誌
Journal of Physical Therapy Science (ISSN:09155287)
巻号頁・発行日
vol.29, no.9, pp.1680-1683, 2017 (Released:2017-09-15)
参考文献数
18

[Purpose] The purpose of this study was to investigate the effects of interferential current therapy on the waist circumference and visceral fat length in obese women. [Subjects and Methods] In this study, we selected 30 patients whose body mass index was over 25 kg/m2. The subjects were randomly assigned to receive interferential current therapy three times a week for four weeks (n=15) and transcutaneous electrical nerve stimulation three times a week for four weeks (n=15). Waist circumference was measured in cm using a tape measure with the participant in an upright posture, and the length of visceral fat was measured using a high-resolution, B-mode ultrasound machine. [Results] There was a statistically significant difference between the group of waist circumference and visceral fat length. The change of waist circumference and visceral fat length was larger the experimental group than the control group. [Conclusion] These results can be used as a basis for reducing the risk factors that increase mortality due to diseases and can prevent cardiovascular and other adult diseases caused by obesity.
著者
近藤 晴男
出版者
一般社団法人 電気学会
雑誌
電氣學會雜誌 (ISSN:00202878)
巻号頁・発行日
vol.82, no.884, pp.733-742, 1962-05-01 (Released:2008-11-20)
参考文献数
14
著者
山村 尚子
出版者
杏林医学会
雑誌
杏林医学会雑誌 (ISSN:03685829)
巻号頁・発行日
vol.29, no.4, pp.587-589, 1998
参考文献数
7

重篤な基礎疾患や病状の悪化により,昏睡状態に陥ったが,救命医療により意識の回復をみた連続38例を対象に,臨死体験の有無とその内容を調査した。連続38例中14例(37%)に臨死体験をみた。体験内容では,虚空感,平和の情感,自己観察,フラッシュバック,死者との遭遇,帰還などの要素をみることができたが,欧米に多いトンネル体験はみられなかった。臨死体験の終末医療への応用の可能性としては,i)臨死状態から回復した患者の体験内容に耳を傾けることが,不安をもつ患者の心の支えになる,ii)終末期にある患者の不安や恐怖に対して,慰めと安らぎを与えることができる,iii)死に直面した経験がないものでも,死に対する知識をもち,患者に対応できるようになりうる,iv)臨床科学の研究面を拡大する可能性があるといった点であった。
著者
Masayuki Nakayama Hironori Kawakata Shiro Hirano Issei Doi
雑誌
JpGU-AGU Joint Meeting 2020
巻号頁・発行日
2020-03-13

It is still vailed how elastic waves propagate in partially water-saturated unconsolidated media. Barrière et al. (2012, GJI) detected changes in amplitude and propagation velocity of transmitted waves through a 1-m long sand soil during water injection and drainage. However, the transmitted waves may not be stable, because they are generated by hitting a steel ball to granite plate. Also, the frequency band they analyzed was limited within 1.6-1.8 kHz. It is necessary to improve the experimental setup to estimate the spatial variations of the medium changes or to utilize the later phases of the transmitted waves, for example, reflection phases which are generated at the boundaries between the solid-fluid or fluid-fluid phases. In this study, we realized a system where we adopted a reproducible source (hereinafter, referred to as a shaker) and used a signal with a higher and broader frequency band of about an octave range in several ten kilohertz so that the wavelengths were longer than path lengths. In order to demonstrate the utility of our developed system, we here evaluated the stability of transmitted waves through a sand soil under dry or saturated conditions.We made a sand soil with the thickness of about 100 mm in a container (375 L×255 W×235 H mm3), which consisted of a permeable part (Wet part) and two impermeable parts (Impervious part and Dry part). We installed the shaker into Dry part to prevent change in the coupling between the shaker and the sand. 5 accelerometers were installed in the sand soil: one (ACref) was in the vicinity of the shaker as a reference, and the others (AC1-4) were aligned horizontally in Wet part. We designed a linear sweep signal from 1 kHz to 50 kHz as a transmitting signal. The transmitted waves were recorded at the sampling rate of 204.8 kHz, and we obtained hourly stacked waveforms. 4 Soil moisture meters were also installed to monitor water contents in the sand soil.We successfully recorded the transmitted waves at all of the accelerometers with high signal to noise ratio for the frequencies of the sweep signal. The fluctuations of spectral amplitude and phase for ACref were within ±0.5%, ±0.04 rad under both dry and saturated conditions, respectively. This shows that we succeeded in stably radiating the elastic waves from the source. Similarly, the fluctuations of spectral amplitude and phase for AC1-4 were within ±20%, ±0.2 rad under both dry and saturated conditions, respectively. According to the results of Barrière et al. (2012), the expected changes in amplitude and velocity may become about 5% and 15% during saturation or drying, respectively. Their observed velocity became lower than about 160 m/s, therefore, velocity change corresponding to our phase change become at most ~2% for analyzed frequencies. Therefore, these results suggested that our system enables us to sufficiently detect changes in amplitude and propagation velocity of transmitted waves through an unconsolidated porous medium while the degree of fluid saturation or water level changes.
著者
山下 太 福山 英一 下田 晃嘉 渡辺 俊
雑誌
JpGU-AGU Joint Meeting 2020
巻号頁・発行日
2020-03-13

National Research Institute for Earth Science and Disaster Resilience (NIED) has been conducting friction experiments with meter-scale rock specimens using a large-scale shaking table. We have presented a result that the work rate at which the meter-scale rock friction starts to decrease is one order of magnitude smaller work rate than that of the centimeter-scale one (Yamashita et al., 2015, Nature). Mechanical, visual and material observations suggested that the difference of frictional properties between centimeter and meter scale is caused by slip-evolved heterogeneous stress concentration on gouge bumps generated with the frictional slip. We confirmed that numerical simulation based on the observations is fully consistent with the experimental results. However, it should be noted that the natural fault zone generally involves gouge layer in it. Therefore, it is crucial to investigate which the scale dependence of frictional property can be seen or not under such a condition. To answer this question, we conducted meter-scale gouge friction experiments using the large-scale shaking table. We used metagabbro blocks from India as driver blocks. The contacting area was 1.5 m long and 0.1 m wide. As the simulated gouge, we ground metagabbro blocks by the jet mill, so that the average diameter of the gouge particle is approximately 10 μm and the maximum diameter of that is less than 200 μm. We roughened the fault surface by sandblasting after polishing the surface so that the fault surface can grip the gouge particles. We distributed the simulated gouge with a thickness of 3 mm on the fault and then sheared at a constant or step-change velocity after applying normal stress up to 6.7 MPa at maximum. We will present basic experimental results at the meeting.