1 0 0 0 OA 官報

著者
大蔵省印刷局 [編]
出版者
日本マイクロ写真
巻号頁・発行日
vol.1925年02月13日, 1925-02-13
著者
佐々木 明登
出版者
日本結晶学会
雑誌
日本結晶学会誌 (ISSN:03694585)
巻号頁・発行日
vol.53, no.5, pp.312-316, 2011-10-31 (Released:2011-11-20)
参考文献数
8

Today, laboratory X-ray diffractometers are seeing increasingly wide use in the ab initio crystal structure analysis of organic powder samples. This is because optics and optical devices have been improved, making it possible to obtain precise integrated intensities of reflections in high 2-theta ranges. Another reason is that one can use direct-space methods, which do not require “high-resolution diffraction data”, much more easily than before. Described here are some key points to remember when performig ab initio crystal structure analysis using powder diffraction data from organic compounds.
著者
山内 剣
出版者
日本結晶学会
雑誌
日本結晶学会誌 (ISSN:03694585)
巻号頁・発行日
vol.53, no.5, pp.307-311, 2011-10-31 (Released:2011-11-20)
参考文献数
12

Structure determination from laboratory powder diffraction data can be considered routine today as emphasized by the significant increase in the number of published structures, both organic and/or inorganic compounds solved in this way. In the past about 10 years, many significant developments in instrumentation, such as computer technology and powder diffraction methodology, allow determination of crystal structures, the size and complexity of which are only limited by data quality and computing power. New detector technologies (mostly strip detectors), faster PCs and powerful methods of structure solution (especially the direct space and the charge flipping methods) contributed most to an ever increasing success rate. Also monochromater for incident beam (like CuKα1 or MoKα1) is not always required for structure determination.
著者
橋爪 大輔
出版者
日本結晶学会
雑誌
日本結晶学会誌 (ISSN:03694585)
巻号頁・発行日
vol.53, no.5, pp.299-306, 2011-10-31 (Released:2011-11-20)
参考文献数
27

Rietveld method has been widely used for structure refinements as a part of SDPD studies. In this account, practical tips on structure refinements of organic crystal are presented.
著者
浦上 涼子 小島 弥生 沢宮 容子 坂野 雄二
出版者
一般社団法人 日本教育心理学会
雑誌
教育心理学研究 (ISSN:00215015)
巻号頁・発行日
vol.57, no.3, pp.263-273, 2009 (Released:2012-02-29)
参考文献数
21
被引用文献数
14 5

本研究では, 現代において男性社会にも広がっていると考えられる痩身願望の存在に注目し, 体型への損得意識を媒介に痩身願望が規定される心理的メカニズムのモデルを検討した。体型の損得意識においては, 自己肯定感のような自己の視点からみたメリット感と対人関係のように他者の視点からみたメリット感があるのではないかと仮定した。青年期男子224名を対象に質問紙調査を実施し, 体型への損得意識に影響を及ぼすと考えられる個人特性と痩身願望との関連について検討した。現在の体型よりも痩せることが魅力的だとする男子学生131名について分析した結果, 「賞賛獲得欲求」「拒否回避欲求」「身体満足度」などが痩身願望と関連のあることが示された。これらの関連を検討したところ, 痩せれば自分に自信がもてるといった「自己視点からの痩身のメリット感」が痩身願望に直接影響し, それ以外の変数はこの「自己視点のメリット感」を媒介として痩身願望に影響することが明らかにされた。痩身願望に至るルートとして, 第1に自己顕示欲求から発する痩身願望, 第2に自己不満感や不安感から発する痩身願望, 第3に自分の意識する肥満度から発するルートが見出せた。
著者
霜田 光一
出版者
日本物理教育学会
雑誌
物理教育 (ISSN:03856992)
巻号頁・発行日
vol.53, no.4, pp.319-322, 2005-12-20 (Released:2017-02-10)
参考文献数
3
被引用文献数
1

これまでの電磁気学では,クローンの法則,アンペールの法則など数々の実験法則を基にしてマクスウェルの式を導いている。ここでは,光速の原理と電荷保存則を仮定し,これを公理として真空中の電磁場についてマクスウェルの式を導く。ローレンス条件も変位電流も初めの2つの仮定から自然に導かれる。そしてマクスウェルの式を求めた後で,クローンの法則,アンペールの法則,ビオ・サバールの法則などを求める。
著者
小川 利彦 柴田 勝喜 矢留 智津子 高瀬 福巳
出版者
公益社団法人 日本化学会
雑誌
工業化学雑誌 (ISSN:00232734)
巻号頁・発行日
vol.74, no.4, pp.720-724, 1971-04-05 (Released:2011-09-02)
参考文献数
10
被引用文献数
1

各種のアゾ染料を塩化第一スズ, 亜硫酸ナトリウムで還元し, その反応溶液の可視スペクトルを測定した。その結果, アゾ染料の還元性についてつぎの知見を得た。モノオキシアゾ染料, o,o'-ジオキシアゾ染料, およびそのコバルト錯塩染料を塩化第一スズで還元すると, i)その反応はアミン類生成にまで進み, ヒドラゾ化合物の生成が律速段階になる, ii)一連の供試アゾ型分散染料における還元速度と置換基との関係は, ハメット則に適合しρは正となる, iii)o,o'-ジオキシアゾ染料に比してそのコパルト錯塩染料は還元の活性化エネルギーが大である。また供試酸性アゾ染料を亜硫酸ナトリウムで還元すると, i)比較的低温度では反応の第一段階でヒドラゾ化合物を生成し, その後徐々にアミン類を生成する, ii)アミン類生成の活性化エネルギーはヒドラゾ化合物生成の活性化エネルギーに比して高い。
著者
市毛 竣 五十嵐 治一 石原 聖司
出版者
一般社団法人 人工知能学会
雑誌
人工知能学会全国大会論文集 第36回 (2022)
巻号頁・発行日
pp.1D1GS203, 2022 (Released:2022-07-11)

近年のAIに関する課題として,機械学習の推論結果の内部のブラックボックスが挙げられる.その解決アプローチとして,人間の主観に沿うルールにより行うファジィ制御と強化学習の融合は有効な手法だといえる. ファジィ制御と強化学習の融合方式は以前から多くの試みがあった.五十嵐らはファジィ制御ルールを方策に持つ方策勾配法を提案した.そこではルール重みやメンバーシップ関数内部パラメータの学習則を述べている. 本研究では,自動車の速度制御問題の事例において,メンバーシップ関数をシグモイド関数で近似し,シグモイド関数内のパラメータ及びルール重みの学習を行った.学習実験の結果,適切なパラメータ値を得ることを確認した.しかし,この場合もメンバーシップ関数の概形は人間が設計していた.そこで,メンバーシップ関数をニューラルネットワークで近似し,適切なメンバーシップ関数の形状をゼロから学習できるか試みた.学習実験の結果,ランダムなパラメータの初期値から人間が設計したメンバーシップ関数の形状によく似た関数形を得ることができた.これは,本学習方式により,人間のファジィ的な概念をゼロから獲得できることを示唆している.
著者
酒井 健
出版者
企業家研究フォーラム
雑誌
企業家研究 (ISSN:24340316)
巻号頁・発行日
vol.15, pp.61-77, 2018-07-20 (Released:2021-08-25)
参考文献数
14

This study clarified the R&D and diffusion process of the breakthrough stainless surgical needle developed by MANI Inc., a Japanese company engaged in the manufacture of high-quality, durable small medical instruments. In the 1960s, MANI developed the world’s first stainless surgical needle, driven by the timely decision-making of top management to invest its R&D against the norm, and their persistent efforts to solve technological problems related to raw material and the manufacturing process. Despite its superior quality and acceptable price compared with the traditional iron needle, the diffusion of the stainless surgical needle was slow until the end of the 1980s. This could be attributed to Japanese hospitals’ disinterest in management, traditional tenets about the nurse’s role, and the interests of the wholesalers. During the 1960s-1970s Japanese hospitals disregarded management due to high demand for medical care, and consequently, they were not concerned with the breakthrough of small products. In addition, Japanese nurses had accepted a traditionally subsidiary role to doctors, while the responsibility for iron needle quality control, a tedious task, was theirs. On the other hand, the wholesalers considered that the diffusion of stainless surgical needles would decrease their sales margins from surgical needles, given the durability of the stainless version. MANI tried to break the deadlock in the 1960s-70s by partnering with exceptional individuals who offered their support to the stainless surgical needle for specific reasons. In the 1980s, as Japanese hospitals became more interested in management, nurses became more empowered and questions were raised over their traditional role. Following these developments, the demand for stainless surgical needles increased dramatically in Japan. As a result of their sustained effort to maintain the stainless surgical needle business, MANI was poised to seize this opportunity and finally diffused stainless surgical needles into the market by 1990.
著者
刈部 博 林 俊哲 成澤 あゆみ 赤松 洋祐 亀山 元信 中川 敦寛 冨永 悌二
出版者
一般社団法人 日本神経救急学会
雑誌
Journal of Japan Society of Neurological Emergencies & Critical Care (ISSN:24330485)
巻号頁・発行日
vol.30, no.2, pp.1-8, 2018-06-01 (Released:2018-11-15)
参考文献数
21

In this study, eleven cases with sports-related traumatic occlusive cerebrovascular accident (OCVA) are investigated to clarify clinical characteristics by reviewing following clinical factors: age, gender, mechanism of trauma, symptom, type of sports, duration between the time of injury and outpatient visit or diagnosis, type and site of vascular injury, co-existent traumatic intracranial lesion, treatment, and outcome. Traumatic OCVAs were accounted for 9.1% of sports-related TBI, as 1.1% of other TBIs than sports-related. It is more common in male than female. Histogram of age distribution demonstrated a peak at the age of 5-14 y.o. Cervical hyperextension and/or hyper-rotation was the most common mechanism of injury. Head and/or neck pain immediately after trauma was the most common initial symptom. The most frequent vascular lesion was an arterial dissection of internal carotid or vertebral artery. Antiplatelets or anticoagulants were introduced for treatment in cases without traumatic intracranial hematoma. Favorable outcomes were obtained in most cases, however, permanent neurological deficits were remained in 3 cases. Since delay in the introduction of treatment results in poor functional outcome, an early visit of outpatient are quite important in patients with sports-related traumatic OCVAs, as well as the standardization of diagnostic algorithm.
著者
貝塚 爽平
出版者
The Association of Japanese Geographers
雑誌
地理学評論 (ISSN:00167444)
巻号頁・発行日
vol.25, no.6, pp.242-246, 1952-06-01 (Released:2008-12-24)
参考文献数
6

In this paper, the origin of asynmetrical river terrace of Dosi-gawa (river) hass been considered. From the shape of terrace and the distribution of terrace gravel, it is concluded that Doshi-gawa is an example of C. A. Cotton's “Valley-side superposition, ” and the lateral sliding of the trunk river on the ancient valley floor was caused by the pushing of fan-shape deposits of tributaries. And, the asynmetrical pressure of tributary deposits are derived from the difference of catchment areas and bights on both side sloes of the trunk river.