著者
須藤 茂 阪口 圭一 松林 修 鎌田 浩毅 加藤 完 山本 隆志
出版者
特定非営利活動法人 日本火山学会
雑誌
火山.第2集
巻号頁・発行日
vol.29, pp.S253-S265, 1984

Temperature measurements of the lava of 1983 in Miyake-jima in the Ako district were started fifty days after the eruption and have been continued since then. The following three kinds of temperature data have been obtained (Fig. 2). 1. Temperatures at 20 cm depth along a graveled temporary road on the clinkery surface of the lava using mercury and alcohol thermometers. 2. Temperatures at 0.5 to 2.5 m depth in iron pipes inserted into the clinker layer using thermocouples and mercury thermometers. The pipe holes were distributed along the temporary road and at scattered stations on the surface of the lava. 3. We drilled a borehole (DH-1) which penetrates through 5.5 m-thick lava into the previous ground. Temperature was measured at 10 points in the hole using thermocouples. For comparison, similar measurements in the Awabe district were made in pipes with depths up to 2.5 m (Fig. 3). These pipes were buried in the holes dug into the massive part of the lava for electric poles. The temperature data at 20 cm depth and in the pipe holes (Figs. 5-10) indicate that isothermal surfaces in the clinker layer are very complicated. This complexity is explained by rising plumes of hot vapor irregularly present in the lava field. The vapor is produced by degassing process in the massive part of the lava and comes up through newly formed cooling joints. Once a cooling joint is formed, the temperature of the massive part of the lava around the joint fell rapidly because a gas plume effectively transports the heat from the massive part to the surface. But the rate of temperature decrease varies greatly from one station to another. New plumes were formed sporadically and the temperatures of the new plumes were much higher than the decreased temperatures of the older plumes. Some older plumes died out because degassing process ended or the joints were self sealed by sublimates. It is necessary to arrange a number of observation stations and to add stations timely in order to reveal a cooling history of aa lava like the lava of 1983 in Miyake-jima. Around a plume, a convection cell was identified in the clinker layer (Figs. 16-18), which is similar to a hydrothermal convection system usually found in geothermal areas. The change of the temperature-depth profile of DH-1 with time (Figs. 11, 12) clearly shows that the lava heated the underlying previous ground. The peak shape of the profile has become broader and the depth of the maximum temperature has steadily fallen. The change of the temperature-depth profile also suggests that the upper clinker layer prevented rainfall from effective cooling of the massive part of the lava for the first 250 days. During that time, raindrops were evaporated in the clinker layer and did not reach the massive part below the clinker layer. Difference of cooling rate between Awabe lava and Ako lava may be due to the difference of the thickness of the clinker layers (Figs. 15, 19).
著者
鎌田 浩毅 須田 恵理子 齋藤 武士 飯澤 功 酒井 敏
出版者
社団法人日本材料学会
雑誌
材料 (ISSN:05145163)
巻号頁・発行日
vol.51, no.2, pp.168-175, 2002-02-15
参考文献数
28

Volcanic debris avalanche is a large-scale landslide which occurs at unstable volcanic edifice and often creates horseshoe-shaped crater at its source with hummocky deposits of volcanic debris including large blocks inside. Dynamic pressure model has recently been proposed to explain flow behavior of volcanic debris avalanches: Kinetic friction of debris avalanche decreases systematically at threshold of a certain critical speed for flotation. We have done a sliding experiment using flour powder as debris avalanche matrix and metal disks that slide on a powder layer as incorporated large blocks. Sliding traces left on a powder layer showed that a disk was floating over a certain critical speed. Kinetic friction coefficients, calculated by the position of a sliding disk recorded on a digital video, become small at a higher speed which exceeds critical floating speed, and provide smaller coefficient than those of normal surface of a rigid body. The critical floating speed deduced from dynamic pressure model is consistent with our experiment. In order to verify this model as the major driving force to float megablocks incorporated commonly in a volcanic debris avalanche, critical floating speeds for two geological cases at the collapses of 1980 Mount St. Helens and 1984 Ontake, central Japan, are examined and compared with the observed flow velocities. Estimated velocities deduced from the dynamic pressure model correspond fairly well to the actual velocities. This strongly suggests that the model gives the most convincing explanation for transportation and deposition mechanism of volcanic debris avalanche.
著者
中田 節也 鎌田 浩毅
出版者
特定非営利活動法人 日本火山学会
雑誌
火山.第2集 (ISSN:04534360)
巻号頁・発行日
vol.33, no.4, pp.273-289, 1988
被引用文献数
8

Volcanism and deposition of volcaniclastic materials within a graben in the Shimabara area, western Kyushu, started in early Pliocene and have continued up to the present. The volcanic products comprise alkalic to high-alkali tholeiitic basalts in addition to calc-alkalic andesites. The basalts are of a member of magmas erupted extensively in NW Kyushu from late Miocene to Recent. Their incompatible-element patterns in spider gram, in which the abundances of Rb, Ba, K, Nb, Zr and Y are normalized to those of MORB, are uniform independently of their eruption-ages, and show positive Ba and Nb anomalies strongly indicative of the marked affinity with ocean-island basalts. These patterns are clearly different from those of island-arc basalts which have negative Nb anomaly, as represented by the Quaternary high-alumina basalts in central Kyushu, and from those of back-arc basin basalts usually showing the same anomaly. It is concluded that basaltic magmas in NW Kyushu were derived from partial melt of fertile mantle with high Nb/Zr. Most of the andesites in the Shimabara area have phenocryst assemblages showing co-existence of magmas with different compositions. This fact and the spidergram pattern without Nb anomaly of the andesites lead us to a magmatic model; the andesite magma originated from mixing of positive-Nb-anomaly basaltic melt with negative-Nb-anomaly acidic partial melt of lower-crust materials which were presumably heated by the former melt. The graben in the Shimabara area seems to have developed in southern periphery of the region under which fertile mantle materials have been rising up from the depth and the subducted oceanic slab has not reached, like the "hot region".
著者
鎌田 浩毅 三村 弘二
出版者
特定非営利活動法人 日本火山学会
雑誌
火山.第2集 (ISSN:04534360)
巻号頁・発行日
vol.26, no.4, pp.281-292, 1981
被引用文献数
2

Kuju Volcano (1, 786m high) consists of dacitic lava domes and the associated non-welded pyroclastic flow deposits, Handa pyroclastic flow deposits, covering 60 km<sup>2</sup> area (Fig.2). The original vents of the pyroclastic flow deposits, whose age is estimated to be 0.04 Ma, have not been located. The volume is about 2km<sup>3</sup>. They contain pumice and accessory lithic fragments and very seldom show welding. At the upper and the basal parts of one flow unit, imbrications of pumice and lithic fragments are well developed with 10°-20°dip against the flow unit boundary (Figs. 4, 5). This dip (Table 1) is apparently not as steep as that of the other pyroclastic flow deposits. Imbrications are clearly observed at 6-12km from the center of the lava domes, while the distribution of the pyroclastic flow deposits covers 4-13km from the center (Fig. 7). The pyroclastic flows ran down 1000m in a vertical distance. The method of determining the flow direction by imbrication is very simple as shown in Fig. 6. Imbrication is most visible from the direction (a) perpendicular to the flow direction on the surface of each outcrop. The flow direction (f) is determined by the bisector (f') of the error angle 2θ formed by the two directions (b, c), between which imbrication is not observed. Data are classified into 3 ranks by the error angle θ as shown in Table 1. The flow directions at 52 outcrops (Table 2) are shown by classified arrows in Fig. 7. The estimated flow-direction patterns are largely divided into the north-flank flows and the south-flank flows (Fig. 7). The north-flank pyroclastic flow deposits flowed along the 2 km-wide major valley on ca 2°slope shown in K-L profile in Figs. 8, 10. Then it diverged to the west at the outlet of the valley, and finally collected in a small basin in the west. Such flow directions suggest that the flow was not derived from the adjacent domes D, E, F in Fig. 7. On the south flank, a fan-shaped pattern of the flow direction is generally observed. But the flows toward Aso volcano are sharply separated into two flows at the boundary between Kuju and Aso ("col" in Figs 7, 9). This is because the flow had not enough power to rush up the very gentle slope of Aso volcano. The evidence shows that the southward flow gradually bent 120°, and it rapidly went down eastward on the south flank. At Takenohata (n. in Fig. 7) this eastward flow crossed the southward flow. At this cross point, lower outcrops show eastward flow (A-B profile in Fig. 8), and higher ones show southward flow (C-D profile) as shown in Fig. 11. This means that after the eastward flow filled the old valley extending in east-west direction, the later pyroclastics flowed southward over the older deposits forming a fan-shaped deposit. Data clearly suggest that the vent for the pyroclastics is located within the circle around A, B, C lava domes, and not in the other domes. The flow directions indicated by imbrications agree with the distribution of the pyroclastic flow deposits. Pyroclastic flows follow the previous topographic relief such as valley, fan, and col. Kuju Volcano may not have emitted the flooded sheet-flows in all directions, but have emitted the tongue-shaped flows intermittently to different directions.
著者
鎌田 浩毅 千葉 達朗
出版者
一般社団法人 日本地質学会
雑誌
地質學雜誌 (ISSN:00167630)
巻号頁・発行日
vol.101, no.12, pp.XXXXIII-XXXXVI, 1995-12-01
被引用文献数
2 1
著者
外池 智 TONOIKE Satoshi
出版者
秋田大学教育文化学部附属教職高度化センター
雑誌
秋田大学教育文化学部教育実践研究紀要 Bulletin of the Center for Educational Research and Practice, Faculty of Education and Human Studies, Akita University (ISSN:24328871)
巻号頁・発行日
no.42, pp.1-13, 2020

「本研究の目的」に代えて,以下本稿の概要を述べる.本研究は,2009(平成21)年度から推進している戦争遺跡に関する研究1,2012(平成24)年度から推進している戦争体験の「語り」の継承に関する研究2,2015(平成27)年度から取り組んでいる継承的アーカイブを活用した「次世代の平和教育」の展開に関する研究3の継続研究であり,さらに2018(平成30)年度から取り組んでいる地域の継承的アーカイブと学習材としての活用に関する研究4の一端を発表するものである. 戦後74年の歳月が経ち,戦争体験を語れる終戦時の年齢を仮に10歳とすれば,もはやその人口は全人口の5 %以下となった.こうした状況の中,あの貴重な体験や記憶を残し,継承していこうとする試みが続いている.また教育現場においても,直接的な戦争体験の「語り」ではなく,そうした継承的アーカイブを活用したいわば「次世代の平和教育5」と呼ぶべき実践が次々と展開されている. こうした状況を踏まえ,本稿では,戦争遺跡の学習材としての活用について,特に今回は館山市の事例を取り上げたい.