著者
筒井 洋一
出版者
一般財団法人 日本国際政治学会
雑誌
国際政治 (ISSN:04542215)
巻号頁・発行日
vol.1988, no.89, pp.42-56,L8, 1988

The purpose of this paper is to analyze the characteristics of the &ldquo;Antifa&rdquo;, a unique type of labor movement in Germany at the end of the World War II. The KGF in Bremen was one of the most influential Antifas. In contrast to other European countries at that time and to Germany at the end of the World War I, Germay after World War II was not liberated by the people themselves, but by the Allied Powers: most of the Germans were very passive and in the state of political apathy. In such circumstances, the KGF members were rare exceptions, and devoted themselves to the denazification of all the social sectors, the material reconstructions of daily life and the unification of the labor parties.<br>It is true that the KGF arose from the labor movement and spread through it, but finally it went beyond the traditional labor movement: it came to have its own decision and action apart from the labor parties in organizing the members, and it also made much of the so-called &ldquo;basic democracy&rdquo;, which means the decentralized and direct democracy in the lower branch of the organizations.<br>Consequently, it had to face the Military Governments (MG), the German civil administrations and the labor parties. MG and the administrations shared an interest to oppress the KGF, to delay the denazification and to reconstruct the traditional conservative administrations in the pre-Nazis era. At the beginning, the labor parties in Bremen kept step with each other to strengthen the KGF. Unlike most of the rank and file, however, many local leaders were obviously persuaded to pledge loyalty to the national leaders: to K. Schumacher in SPD, to W. Ulbricht in KPD. Their strategies tried to damage the unification policy by the KGF. Members of the split socialist groups criticized furiously this tendency and stood by the KGF. Those who would not agree with SPD nor KPD were too small in number to become the third group.<br>Besides those obstacles inside and outside of the labor movement, the KGF essentially had inner organizational weaknesses. In regard to its member structure, most were recruited from labor movement veterans, not so many from nonpartisans. More importantly, they had no more intentions to make long-range strategy, after having failed to gain unification. Finally they dissolved the KGF by themselves in early 1946. In mid-1940s and 1950s, the labor movement was almost involved in Cold War, neglecting the original ideas of the Antifa. However, we find its analogous type of movement in mid-1960s, when the &ldquo;new social movement&rdquo; appeared.
著者
高橋 善隆
出版者
跡見学園女子大学
雑誌
跡見学園女子大学文学部紀要 = Journal of Atomi University, Faculty of Literature (ISSN:13481444)
巻号頁・発行日
no.54, pp.145-157, 2019-03

米国政治の中長期的トレンドは、人口構成の変化を反映したマイノリティのエンパワーメントとこれに対抗するホワイト・バックラッシュで彩られている。2018年の中間選挙も下院でラティーノ・アフリカ系・働く女性・若者などの進歩的勢力が民主社会主義を掲げ躍進を見せる一方で、トランプ支持者や共和党は上院で多数を維持するなどの結果を残した。移民政策の迷走や中西部の動向を手掛かりに中間選挙の背景を分析する。
著者
山本 泰幹 半野 久光 藤野 陽三 矢部 正明
出版者
公益社団法人 土木学会
雑誌
土木学会論文集A (ISSN:18806023)
巻号頁・発行日
vol.66, no.1, pp.13-30, 2010 (Released:2010-01-20)
参考文献数
26

首都高速道路における長大吊構造系橋梁である横浜ベイブリッジ,レインボーブリッジ,鶴見つばさ橋は,現在耐震補強工事が進められている.ここでは,3橋梁の内,長大斜張橋の横浜ベイブリッジを対象にダブルデッキ形式の主桁の下層に位置する鋼製トラス桁,および鋼製主塔を対象とした耐震性能の照査について示した.鋼製下路トラス桁と鋼製主塔は,その耐力や非線形特性に関する実証的な研究成果がないため,3次元シェル要素で当該構造をより実態に近い形でモデル化し,着目する損傷箇所に生じる地震応答が最大となる時刻における慣性力分布を地震力とするプッシュオーバー解析を行い,その耐震性能を照査した.
著者
大久保 朝憲
出版者
關西大學文學會
雑誌
關西大學文學論集 (ISSN:04214706)
巻号頁・発行日
vol.70, no.3, pp.149-175, 2020-12-18
著者
津田 雄一
出版者
独立行政法人宇宙航空研究開発機構
雑誌
若手研究(B)
巻号頁・発行日
2009

本研究が理論的な基礎としている状態遷移行列の近似法に関する理論(申請者とコロラド大学教授との共同執筆論文)は,摂動の作用する実環境の状態遷移行列を解析関数群で近似する手法である.本研究により,左記の近似を施しても,状態遷移行列がそもそも物理的に本来保存すべき数学構造を保存する定式化が可能であることが示された.ここで本来保存すべき数学構造とは斜交群構造(simplecticity)であり,この構造を保存することで良好なエネルギー保存・運動量保存特性が得られるのが特徴である.また,本理論の具体的応用先として,実摂動環境下での編隊飛行の相対軌道設計に適用する手法について,網羅的に示された.具体的作業としては,前年度に引き続き,理論面では状態遷移行列の特異値構造に基づく最適編隊飛行軌道の設計法を構築した.結果として得られた手法は,地球周回の編隊飛行ミッションにおいて,実際の摂動環境下で制御コストの推算および最適相対軌道設計が容易となるものである.本手法は,摂動源の数学的・物理的構造に着目した手法であるため,場当たり的な数値最適化とは異なり,摂動源ごとの挙動の分離が可能であり,最適設計の指針が得やすい(設計者に自由度が残される)のが特長である.本年度の研究活動により,当該設計法を実現する計算プログラムコードの開発・評価を行い,妥当な結果を得た.研究成果は,年度中盤の3回の国際学会にて発表を行うとともに,理論構築の基礎部分について,学術論文としてまとめた.