著者
藤田 尚志
出版者
九州産業大学
雑誌
研究活動スタート支援
巻号頁・発行日
2009

一年目は近現代フランスのさまざまな思想家の著作を読み、そこに現れる身体観を、愛・性・家族の諸問題を通じて解き明かすことに努めた。この準備作業を経て、二年目の秋に国際シンポジウム「結婚の脱構築-レヴィ=ストロース、ボーヴォワール、クロソウスキー、デリダ」を開催し、海外の研究者らとともに、20世紀フランス思想に現れる身体の諸問題を、「結婚」という具体的な例に即して思考することを試みた。
著者
池田 徹郎
出版者
震災豫防調査會
雑誌
震災豫防調査會報告
巻号頁・発行日
vol.100, no.2, pp.97-112, 1925-03-31

付録3頁
著者
小林 厚志
出版者
社団法人 繊維学会
雑誌
繊維学会誌 (ISSN:00379875)
巻号頁・発行日
vol.60, no.6, pp.P_360-P_360, 2004 (Released:2006-02-15)

1 0 0 0 OA 真空管回路

著者
千葉茂太郎 著
出版者
共立社
巻号頁・発行日
1939
著者
竹村 俊彦
出版者
日本エアロゾル学会
雑誌
エアロゾル研究 (ISSN:09122834)
巻号頁・発行日
vol.24, no.4, pp.237-241, 2009-12-20 (Released:2009-12-25)
参考文献数
17
被引用文献数
1

The aerosol effects on the climate system are roughly divided into three categories: direct, indirect, and semi-direct effects. Observations from satellites and ground with remote sensing and numerical models have been developed to understand and estimate aerosol effects on a global scale. In the latest assessment report of the Intergovernmental Panel on Climate Change (IPCC) , however, there are still large uncertainties in their radiative forcings in comparison with the estimation of long-lived greenhouse gases. To reduce the uncertainties, we have to study the three-dimensional aerosol distributions and the cloud-aerosol interaction more accurately. It is important to observe aerosol vertical profiles with lidar, one of the active sensors, to understand the three-dimensional aerosol distributions as well as to continue observations with passive sensors. The data assimilation, which harmonizes numerical models with observations, is also an effective method to reduce the uncertainties. A cloud resolving model coupled with an aerosol transport model is a useful tool to better understand the cloud-aerosol interaction. Efforts to analyze the aerosol climate effects quantitatively will result in more reliable projection of the future climate change and elucidating climate system.
著者
荒谷 次郎
出版者
イタリア学会
雑誌
イタリア学会誌 (ISSN:03872947)
巻号頁・発行日
no.16, pp.23-33, 1968-01-20

Byron scrisse tragedie alfieriane durante il suo soggiorno in Italia, fra l'imperversare della tirannia del governo austriaco e la rivolta disperata dei repubblicani ardentemente bellicosi. L'ambiente non poteva essere piu prospizio per scegliere la via delle tragedie politiche perseguendo l'ideale italiano contemporaneo. Cosi apparsero il<<Marino Faliero>>(1820)che apparentemente rassomiglia la<<Congiura de' Pazzi>>dell' Alfieri, e i<<Due Foscari>>(1821)in cui si trova l'imitazione generale dall' Alfieri e particolare dalla<<Congiura>>e dal<<Filippo>>. E infine, <<la vecchia maniera>>dell' Alfieri-cosi come diceva Byron stesso-si riprovo col<<Sardanapalo>>(1821), pur essendo lontano dalle esigenze della scena, libero e spontaneo e che, se come tragedia non regge, e il migliore scritto drammatico di Byron. Soltanto in quest'ultimo dramma non si vede l'imitazione dei difetti dell' Alfieri. Quindi si puo dire che la sua imitazione delle opere alfieriane fu un vero fallimento e non gli era giovata nulla. Qui si tratta, prima, il carattere generale del metodo teatrale dell'Alfieri e poi i motivi byroniani di seguirlo, e nello stesso tempo si spiega anche la risonanza dei classici e dei romantici in quel periodo ; ed infine, si rilievano i meriti e difetti comuni dei due autori dal punto di vista artistico e politico.

1 0 0 0 円錐曲線

著者
蟹谷乗養著
出版者
東海書房
巻号頁・発行日
1949
著者
渡辺 幸一 名取 千晶 朴木 英治
出版者
公益社団法人大気環境学会
雑誌
大気環境学会誌 (ISSN:13414178)
巻号頁・発行日
vol.40, no.3, pp.122-128, 2005-06-10
被引用文献数
4 4

2003年秋期に立山において霧水の採取・分析を行った。霧水のpHは, 中腹の美女平で4.1〜5.0, 山頂に近い室堂平で3.3〜5.1であった。美女平では海塩起源成分がしめる割合が高く, 立山が比較的海岸に近いためであると考えられる。霧水中のNO_3^-/nss-SO_4^<2->(N/S)は美女平で高く, 室堂平で低かった。pHが4以下の強い酸性霧は室堂平でしばしば観測され, 酸性霧中の硫酸イオン濃度が高かった。今回の観測期間中で最もpHが低い霧水が観測された9月19日について後方流跡線解析を行った結果, 大陸の汚染物質の影響を強く受けている可能性が示唆された。
著者
奥富 正敏
出版者
一般社団法人情報処理学会
雑誌
情報処理学会研究報告コンピュータビジョンとイメージメディア(CVIM) (ISSN:09196072)
巻号頁・発行日
vol.1996, no.115, pp.57-64, 1996-11-21
被引用文献数
17

ステレオ視は、画像からの3次元再構成のための重要な手段であると考えられ、従来から大変多くの研究がなされてきた。本報告では、「ステレオ視において、結局何が本質的に問題なのか」、「提案されたさまざまな手法が、主にどういう問題を解決しようとしてきたのか」を整理すると同時に、今後の展開を考察する。Stereo Vision is an important method for 3-D reconstruction from images. And a huge number of researches on this method have been done. In this report, we survey the fundamental issues such that, "after all, what are the essential problems in stereo vision?" and "what problems have the methods proposed so far mainly solved or intended to solve?", and also "what would be important for future development?".
著者
木山 次郎 伊藤 慶明 岡 隆一
出版者
一般社団法人電子情報通信学会
雑誌
電子情報通信学会技術研究報告. SP, 音声
巻号頁・発行日
vol.95, no.123, pp.81-88, 1995-06-23
被引用文献数
22

蓄積された任意話題の音声から重要な単語を取り出したり、話題の境界を検出することができれば有用であろう。本稿では、音声中の互いに類似した十分な長さの区間を抽出することによって重要区間抽出を実現する手法を提案する。この方式は、任意の話題について詳細な要約が可能という利点を持つ。1名の話者の発声した模擬対話音声を対象に実験を行ない、本方式の有効性を確認した。また、本稿では、互いに類似する区間の対応関係を利用した、話題境界の抽出法を提案する。1名の話者が発声する4話題の模擬対話を接続した音声を用いた実験により、本手法が有効であることを確認した。さらに、本稿では、長時間の音声中の類似区間を抽出するのに適した手法として、Incremental Reference Interval-free Continuous Dynamic Programming(IRIFCDP)を提案する。
著者
高木 眞一 熊谷 正夫 伊藤 裕子 小沼 誠司 下平 英二
出版者
社団法人日本鉄鋼協会
雑誌
鐵と鋼 : 日本鐡鋼協會々誌 (ISSN:00211575)
巻号頁・発行日
vol.92, no.5, pp.318-326, 2006-05-01
被引用文献数
6

The fine particle peening process, which makes particles of several tens microns in diameter impact at high speed, has been adapted industrially to auto motive steel parts or tool steels because the fatigue property is superior to that of a conventional shot peening process. However, microstructural changes obtained from this process have not been fully understood. In this study, microstructural change of JIS-SCr420 carburized steel (HV 7.55 GPa) by the fine particle peening process was investigated comparing with cases of a conventional shot peening and of softer steels. In SEM observation of the carburized steel, although plastic flow was observed in the region from the surface to a depth about 2μm, nanocrystalline structure was not detected. TEM observation revealed that nanocrystalline layer with about 0.5μm in thickness was produced continuously along the surface. In softer steels which hardness below HV 3.72 GPa in this study, nanocrystalline structure was observed as the folded and layered deformation region, which existed locally and discontinuously along the surface. Morphological difference of these nanocrystalline structures is considered to result from surface deformation modes by particles impact. In softer steels, the convex part in considerable uneven surface formed by the impact is folded and imposed into interior region by the repeated impact and developed to nanocrystalline structure. In carburized steel, owing to absence of the considerable unevenness, throughout surface area deformed during the impact and nanocrystalline structure is developed homogeneously and continuously along the surface. In a conventional shot peening condition, nanocrystalline structures were not formed.