著者
根尾 昌志
出版者
日本脳神経外科コングレス
雑誌
脳神経外科ジャーナル (ISSN:0917950X)
巻号頁・発行日
vol.23, no.2, pp.114-120, 2014 (Released:2014-02-25)
参考文献数
21

頭蓋頚椎固定術は骨の手術であるということを認識し, 手術にあたってはbone biology, biomechanics, 頭蓋頚椎アラインメントについての知識, 理解が必須となる. これらの視点から, 頭蓋骨や上位頚椎のアンカーの特徴と注意点について述べる. 後頭骨や頚椎のインストゥルメンテーションの最大の合併症は血管損傷であり, これを予防するためには, 血管走行のバリエーションの理解と, 術前のCT angiographyやCT venographyによる椎骨動脈や脳硬膜静脈洞の評価が必須である. また, 上位頚椎のアラインメント不良が, 後頭骨頚椎固定術のもう一つの重篤な合併症である術後の嚥下障害に与える影響についても述べる.
著者
辻 英明
出版者
日本ペストロジー学会
雑誌
ペストロジー (ISSN:18803415)
巻号頁・発行日
vol.20, no.1, pp.5-9, 2005-06-30 (Released:2019-04-10)
参考文献数
8

緑茶の残渣,メロンの皮,バナナ(皮を含む),梨果実の芯,柿果実(断片),ハムの薄切り切片(水添加)等を個別のカップに入れ,隙間のある窓際に9〜12日間置き,12日〜17日目に発生している小型のハエ類の成虫,蛹,幼虫の定性的な観察を1999年9月中下旬に行った.その結果,バナナ,梨,柿にはキイロショウジョウバエが多数発生したが,オオキモンノミバエはわずかしか発生しないか,あるいは全く発生しなかった.しかし,メロンの皮からはオオキモンノミバエの蛹の発生数がショウジョウバエより多かった.ハムからは圧倒的多数のオオキモンノミバエが発生し,ショウジョウバエはわずかであった.緑茶の残渣には多数の小型のチョウバエ類と若干のニセケバエ(ナガサキニセケバエ)とノミバエが発生した.小型のチョウバエ類とニセケバエは他の残渣には発生していなかった.
著者
三村晃功編
出版者
福武書店
巻号頁・発行日
1976
著者
安江 雄一 濱部 奈穂 日生下 由紀 園田 俊二 香河 清和 谷上 博信
出版者
日本臨床麻酔学会
雑誌
日本臨床麻酔学会誌 (ISSN:02854945)
巻号頁・発行日
vol.33, no.1, pp.142-147, 2013 (Released:2013-03-12)
参考文献数
5

当院では2010年12月,業務中に突然の停電を経験した.自家発電設備は問題なく機能したが,停電発生後約1時間,原因特定や復旧のめどがまったく立たない状態であった.その間,患者搬送のエレベーターが使用できず,術後患者の管理に問題となった.この経験から,復旧のめどを含めた情報収集が重要であり,自家発電装置の性能や備蓄燃料は病院ごとにばらばらで場合によっては停電中の業務に支障が出うること,各機器の電源種別を決めておかないと思わぬ機器が動かず困る可能性があること,自家発電に切り替わるときに数十秒の停電となるため再起動が必要となる機器があり,その際実際に適切に操作できること,これらを平時より確認し,手順化しておくことが重要と思われた.
著者
城戸 博隆 鈴木 浩之 大矢 裕一
出版者
公益社団法人 高分子学会
雑誌
高分子学会予稿集 第59回高分子討論会
巻号頁・発行日
pp.4782, 2010 (Released:2012-03-28)

温度応答性ゾル-ゲル転移を示す生分解性インジェクタブルポリマーゲルからの持続的な薬物放出を達成することを目的として,疎水性薬物を内包した生分解性高分子ミセルをインジェクタブルポリマー溶液と混合してゲル化させ,その薬物の放出挙動などについて検討した。
著者
高橋 公明 TAKAHASHI Kimiaki
巻号頁・発行日
2005-08-31

11th Conference of the European Association for Japanese Studies
著者
上田哲男
出版者
北海道大学
雑誌
電子科学研究
巻号頁・発行日
vol.2000, no.8, 2001-03-05
著者
青木 美紗
出版者
地域農林経済学会
雑誌
農林業問題研究 (ISSN:03888525)
巻号頁・発行日
vol.53, no.2, pp.49-59, 2017-06-25 (Released:2017-06-30)
参考文献数
24

In order to develop rural areas sustainably, the senary sector companies related to food and agriculture play important roles. Therefore, the number of such companies have increased recently in Japan. However, one of the challenges for senary sector companies in mountainous areas is to develop value-added products and market as well as to establish the enterprise. This study aims to reveal the process of products and market development utilizing local network of food industries, focusing on the “Kozagawa Yuzu Hirai no Sato” enterprise in Wakayama prefecture, in terms of relationship marketing and value co-creation. An interview survey of the company and people of the local network was conducted to achieve the purpose. As a result, the company develops its own product using other companies’ products as ingredients to enhance the product value and also develops market through the industries’ network thus reducing transaction cost. This shows that networking with members sharing the same values and goals is significant for product and market development of a small senary sector company in mountainous areas.

1 0 0 0 松戸市史

著者
松戸市史編さん委員会編
出版者
松戸市
巻号頁・発行日
1961
著者
大西 献 光畑 幸史 宿谷 光司 池田 健太郎 森家 康文
出版者
一般社団法人 日本ロボット学会
雑誌
日本ロボット学会誌 (ISSN:02891824)
巻号頁・発行日
vol.33, no.6, pp.460-469, 2015 (Released:2015-08-15)
参考文献数
25

Operativity will be spoiled if the thick cable of an end effector is in the exterior of a manipulator. The less wiring device adapting Power Line Communication technology has been developed. Transmission of the information and transfer of power on an end effector are realizable with one pair of twisted pair wires. The technical details, peripheral technology, example of application and future subjects of this device which can be used, such as not only a robot but onboard equipment and plant apparatus, are reported.
著者
本田 豊
出版者
解放出版社
雑誌
部落解放 (ISSN:09143955)
巻号頁・発行日
no.143, pp.p14-56, 1980-01
著者
佐藤 悠 井上 健司
出版者
一般社団法人 日本機械学会
雑誌
日本機械学会論文集 (ISSN:21879761)
巻号頁・発行日
vol.82, no.843, pp.16-00348, 2016 (Released:2016-11-25)
参考文献数
20
被引用文献数
1

A method for a six-legged robot of walking on terrain with various undulations by tripod gait is proposed. First the robot detects foot landing using touch sensors, and estimates the inclination angle of the ground from the landing positions; the estimated ground is called “reference ground”. Second the robot measures the inclination angle of its body using acceleration sensor. Then the legs move up and down so that the body may be parallel to and may keep a constant distance from the reference ground. If the robot encounters deep depressions or downward slopes, the robot suspends walking and actively inclines the reference ground. As a result the body inclines, and the swing leg goes further down. When the swing leg reaches the ground, the robot restarts walking. Due to the feedback gain of body orientation control, the robot does not respond to fine change of undulation. Hence the body keeps a constant orientation on short distance undulation or rugged surface, and gradually inclines its body on long distance undulation such as slopes and stairs. The ability of climbing up and down slopes and steps in longitudinal and transverse directions is evaluated by experiments. The maximum angle of climbing up slopes is 30 degree, and that of climbing down slopes is 40 degree. The maximum height of climbing up steps is 150 mm, and that of climbing down steps is 180 mm. The robot can also go through a bump of 125 mm width and 60 mm height.
著者
石井 公成 森 博達 金 文京 瀬間 正之 奥野 光賢 師 茂樹 董 志翹 鄭 在永 崔 鈆植 馬 駿
出版者
駒澤大学
雑誌
基盤研究(B)
巻号頁・発行日
2012-04-01

本研究では、変格漢文について研究している日本・韓国・中国の専門家たちが参加し、メールの交換や毎年開催した国際研究集会を通じて研究を推進してきた。その結果、古代の日本と韓国における変格漢文の多様なあり方が明らかになり、『日本書紀』や聖徳太子の作とされる三経義疏には、これまで報告されていた用例よりはるかに多い変格漢文の用例が見られることが知られた。これは、『日本書紀』の各部分の著者たちや三経義疏の著者を判定するうえで、きわめて有益な発見である。さらに、新羅の変格漢文についても様々な発見をすることができ、日本への影響と日本への違いを明らかにすることができた。