著者
沖 和史 松尾 嘉洋 木村 圭 小柳 裕彦 末次 正
出版者
一般社団法人 映像情報メディア学会
雑誌
映像情報メディア学会技術報告
巻号頁・発行日
vol.24, pp.57-62, 2000

スイッチトキヤパシタ変成器を用いたチップ集積型DC-DCコンバータ回路の動作特性を、スイッチング周波数、MOSFETのチャネル幅、ゲート電圧について行った。HSPICEを使ってシミュレーションを行った結果、負荷抵抗1〜10kΩにおいて、最大出力電力606μW、最大効92.43%の動作特性を持つことがわかった。
著者
沖 和史 松尾 嘉洋 木村 圭 小柳 裕彦 末次 正
出版者
一般社団法人映像情報メディア学会
雑誌
映像情報メディア学会技術報告 (ISSN:13426893)
巻号頁・発行日
vol.24, no.53, pp.57-62, 2000-09-22

スイッチトキヤパシタ変成器を用いたチップ集積型DC-DCコンバータ回路の動作特性を、スイッチング周波数、MOSFETのチャネル幅、ゲート電圧について行った。HSPICEを使ってシミュレーションを行った結果、負荷抵抗1〜10kΩにおいて、最大出力電力606μW、最大効92.43%の動作特性を持つことがわかった。
著者
西田 智裕 伊藤 孝紀 福島 大地 深町 駿平 松岡 弘樹 仙石 晃久 大塚 孝信 伊藤 孝行
雑誌
研究報告知能システム(ICS) (ISSN:2188885X)
巻号頁・発行日
vol.2016-ICS-185, no.9, pp.1-7, 2016-12-06

住民参加によるまちづくりの法制化に伴い,まちづくりワークショップが増えている.まちづくりワークショップは,毎週 ・ 毎月など期間を空け,連続して実施すること (連続ワークショップ) がある.一方,ワークショップの間での日常生活において,議論に対する意見が出てくることがある.この意見をワークショップの議論へ反映することは難しい.そこで本研究では,対面式のまちづくり連続ワークショップの間に,合意形成支援システムを用いた非対面式ワークショップを行う手法を提案する.提案手法による合意形成への効果や課題を検証することを目的とする.提案手法の効果は,社会実験により検証する.社会実験では,地権者,住民などに加え学生も参加した連続ワークショップを行う.まちづくり連続ワークショップの間に,合意形成支援システムによる議論を行う.まちづくり連続ワークショップと合意形成支援システムにおける議論データの分析および参加者へのアンケート調査を行い,提案手法の効果および課題点を把握する.
著者
松友 知香子
出版者
美学会
雑誌
美學 (ISSN:05200962)
巻号頁・発行日
vol.57, no.1, pp.42-55, 2006-06-30

Unter den ca. 9.000 Werken von Paul Klee gibt es ca. 180 Bilder, in denen die "Stadt" thematisiert wird. Diese Werke konnen die "Stadt-Bilder" genannt werden. In der bish-erigen Forschungsgeschichte wurde aber auf diese Bildergruppe nicht achtgegeben. Es wurde auch nicht uberlegt, welchen Sinn diese Bilder haben. Bei der naheren Betrachtung ergibt sich, dass diese Stadt-Bilder in drei verschiedenen Epochen hergestellt wurden, und der Charakter der Bilder in diesen Epochen von einander differenziert wird. In der vorliegenden Arbeit wird zunachst versucht, einen Uberblick liber diese Stadt Bilder zu werfen. Dann werden die Bilder in der dritten Epoche eigens in Betracht gezogen, da der von Klee verstandene Sinn der "Stadt" mit der Entwicklung seiner Welt- und Naturanschauung erst in dieser Epoche in der reifen Form zum ktinstlerischen Ausdruck gebracht wird. Um diese Interpretation mit dem konkreten Beispiel zu belegen, wird das representative Werk Klees, "Ein Blatt aus dem Stadtebuch", aufgenommen und ausfuhrlich analysiert. Es wird am Ende klar, dass Klee die in der modernen Stadt verborgene Spannung zwischen der Erde als dem Diesseits und dem Himmel als dem Jenseits mit der symbolischen Figur einer "Scheibe" und durch eine gewisse Farbenkombination als Folge seiner "Farbenlehre" darstellt.
著者
杉本 公一 小林 純也 北條 智彦
出版者
一般社団法人 日本鉄鋼協会
雑誌
鉄と鋼 (ISSN:00211575)
巻号頁・発行日
vol.103, no.1, pp.1-11, 2017 (Released:2016-12-31)
参考文献数
132
被引用文献数
1 24

This paper introduces the microstructure, retained austenite characteristics, strain-induced transformation-deformation mechanism and mechanical properties of transformation-induced plasticity (TRIP)-aided martensitic (TM) steels for the automotive applications. Because the microstructure consists of a wide lath-martensite structured matrix and a mixture of narrow lath-martensite and metastable retained austenite (MA-like phase), the TM steel produced a good combination of tensile strength and cold formability. If Cr and/or Mo were added into 0.2%C-1.5%Si-1.5%Mn steel to enhance its hardenability, the resultant TM steel achieved superior notch fatigue strength and impact and fracture toughness to conventional structural steel such as SCM420. These enhanced mechanical properties were found to be mainly caused by: (1) plastic relaxation of the stress concentration, which results from expansion strain on the strain-induced transformation of the metastable retained austenite; and (2) the presence of a large quantity of finely dispersed MA-like phase, which suppresses crack or void initiation and subsequent connection.

1 0 0 0 OA 司法資料

著者
司法省調査課 編
出版者
司法省調査課
巻号頁・発行日
vol.第14号, 1922
著者
山田 剛史
出版者
一般社団法人 日本行動分析学会
雑誌
行動分析学研究 (ISSN:09138013)
巻号頁・発行日
vol.14, no.2, pp.87-98, 2000-02-29 (Released:2017-06-28)

単一事例実験計画は、教育の幅広い領域で利用されている実験計画の手法である。そこで得られたデータの分析は主に視覚的判断(visual inspection)によって行われる。しかし、この方法の客観性、評定の信頼性といった問題から、単一事例実験データの評価に統計的方法を適用することが提案されるようになった。その中でも、ランダマイゼーション検定とC統計による処理効果の検定は、日米で多くの研究者からその利用が推奨されてきた。本研究では、この2種類の方法間の比較を検定力という視点から行う。モンテカルロ法によるコンピュータシミュレーション実験を行い、2つの方法の検定力を推定した。SAS / IMLによって1次の自己相関を持つ単一事例実験データ(35個のデータを持つABデザイン)を生成し、4種類の自己相関、6つの効果量のもとでそれぞれの方法の検定力を算出した。その結果、ランダマイゼーション検定は検定力が十分に高いとはいえないが、第1種の誤りの統制は良くできていることがわかった。一方、C統計による検定では、正の自己相関のあるデータでは第1種の誤りの統制ができず、逆に、負の自己相関のあるデータでは検定力が低すぎるということがわかった。これより、系列依存性がある単一事例実験データの分析にC統計による検定を用いるのはふさわしくないことがわかった。
著者
藤尾 慎一郎
出版者
国立歴史民俗博物館
雑誌
国立歴史民俗博物館研究報告 = Bulletin of the National Museum of Japanese History (ISSN:02867400)
巻号頁・発行日
vol.26, pp.1-77, 1990-03-10

Included in the earthenwares in the period when the paddy farming was started in Japan is a ware with incised plastic band. The representative pottery of this kind is a jar type pottery (a cooking tool) found mainly in the Western Japan, west of the districts along the Ise Bay. As the distinctive features, it is a deep bowl, and has incised patterns: the plastic bands are adhered at the mouth and the outer surface of its body, and then the plastic bands are incised using a finger or spatula. This is a pot positioned at the transition period from the Jômon period of the culture of gathering and hunting to the Yayoi period of the culture of paddy farming. When dealing with the issues of the transition period, it is quite important where to position this ware. For example, when the division of the times is discussed, such as when the Yayoi period starts, a different conclusion may be drawn depending on the assumption whether this ware is regarded to belong to the Jômon pottery or this ware is regarded to belong to the Yayoi pottery. The western Kyûsyû (Fukuoka Prefecture, Saga Prefecture, Nagasaki Prefecture, Kumamoto Prefecture and Kagoshima Prefecture) is known as the district where the paddy farming had been started in the first place. It is an important fundamental work to put in order the chronological researches on the wares with incised plastic band found in these districts in order to carry on the studies on the start of the Yayoi period.In this paper, attentions were given to the decorative patterns on the mouth and on the body of the jar and six forms were set up. Then, each form was classified into 5 types based on the six attributes (a method to incise patterns, positions to adhere the pastic band around the mouth, the form of the pots, the sizes or the clay bands at the mouth and on the body, surface adjustment of pots and clay band adjustment). As a result, the beginning and the end of the first half of the Yayoi period (approx. BC400~BC100) can be divided into five stages. Period I: a period the pottery with the incised plastic band was born and spread; the pottery of this kind appeared in the Western Kyûsyû under the influence of the Setouchi and Kinki districts. On that occasion, Nijô-kame unique to this district was born.Period II: Nijô-kame born in the Western Kyûsyû appeared also in the Setouchi and Kinki districts. Based on this phenomenon, it can be assumed that the paddy farming had been started even in the Setouchi and Kinki districts.Period III: Itaduke-Ongagawa wares were born in the coastal districts of the Genkai-nada in the Western Kyûsyû (the district from Karatsu-city, Saga Prefecture to Fukuoka-city, Fukuoka Prefectute) and the distribution was expanded. In some regions of the Western Japan from Kyûsyû to Kinki district, the pottery with the incised plastic band almost disappeared, but continued in other regions.Period IV: In the Setouchi district where the pottery with the incised plastic band had disappeared in the period III, the pottery with the incised plastic band reappeared.Period V: The style of the pottery of this period onward developed further based on the patterns of potteries born in the various regions, as a result of the interchanges of the pottery with the incised plastic band born in the period I and Itaduke-Ongagawa wares born in the period III.It is possible to vividly reproduce the circumstances how the Yayoi culture, a period of the agriculture unique to Japan, was born and developed in the dissension of the culture introduced from the Asian Continent and the conventional Jômon culture, if the pottery with the incised plastic band is confrontally positioned with the pottery of Itaduke-Ongagawa wares.
著者
井上 聡
出版者
人工知能学会
雑誌
人工知能学会全国大会論文集 (ISSN:13479881)
巻号頁・発行日
vol.23, 2009

これまでに筆者は複雑系のセルオートマトン(ライフゲーム)を利用したアプリケーションの開発例として ブロック暗号のデータ撹拌のルール(F関数)にセルオートマトンを採用した暗号化システムを提案してきた。 今回の発表においてはこのデータ撹拌方法の妥当性や暗号の堅牢性について中心に検討する。
著者
Mina Thon Toru Hosoi Chanbora Chea Koichiro Ozawa
出版者
公益社団法人日本薬学会
雑誌
Biological and Pharmaceutical Bulletin (ISSN:09186158)
巻号頁・発行日
vol.40, no.8, pp.1161-1164, 2017-08-01 (Released:2017-08-01)
参考文献数
37
被引用文献数
6

The lack of response to leptin’s actions in the brain, “leptin resistance,” is one of the main causes of the pathogenesis of obesity. However, although high-fat diets affect sensitivity to leptin, the underlying mechanisms of leptin resistance are still an enigma. Here we examined the effect of excess saturated fatty acids (SFAs) on leptin signaling in human neuronal cells. Palmitate, the principle source of SFAs in diet, induced leptin resistance in a human neuroblastoma cell line stably transfected with the Ob-Rb leptin receptor (SH-SY5Y-ObRb). We next investigated the function of stearoyl-CoA desaturase-1 (SCD1), an enzyme which converts SFAs into monounsaturated fatty acids (MUFAs), on leptin-induced signaling. We found that reduction of SCD1 activity, through SCD1 inhibition and knockdown, impairs leptin-induced signal transducer and activator of transcription 3 (STAT3) phosphorylation in human neuronal cells. Our findings suggested that SCD1 plays a key role in the pathophysiology of leptin resistance in neuronal cells associated with obesity.