著者
Ryo Onishi Daisuke Sugiyama
出版者
Meteorological Society of Japan
雑誌
SOLA (ISSN:13496476)
巻号頁・発行日
vol.13, pp.235-239, 2017 (Released:2017-12-21)
参考文献数
15
被引用文献数
1 11

We have proposed a deep convolution neural network (CNN) approach for the accurate estimation of the cloud coverage (CC) from images captured by a consumer camera, i.e., snapshot pictures. This CNN can successfully estimate the CC to within the level of the inherent error in the training dataset. A segmentation-based method using a linear support vector machine (SVM) is shown to be unable to distinguish between water surfaces and the sky, while the present CNN can correctly distinguish between them, possibly because the CNN can understand the positioning of components in the images; the sky is over a water surface. The present CNN can also be applied to photo-realistic computer-graphic (CG) images from numerical simulations. Comparisons between the CNN estimates for camera images and for the CG images can provide useful information for data assimilation, and thus contribute to numerical weather forecasting. The CC is a sort of far-field (remote) information. The present CNN has the potential to allow consumer cameras to be used as remote weather sensors.
著者
谷川 恭雄 森 博嗣
出版者
コンクリート工学
雑誌
コンクリート工学 (ISSN:03871061)
巻号頁・発行日
vol.25, no.5, pp.4-16, 1987
被引用文献数
2

コンクリート施工のロボット化を初めとする新工法の開発や, 流動化コンクリート, 繊維補強コンクリート, 水中コンクリートなどの各種コンクリートの開発にともない, フレッシュコンクリートの流動性をより科学的な視点に基づいて評価することの必要性が高まってきている。本稿では, 現在フレッシュコンクリートのコンシステンシー判定法として広く利用されているスランプ試験について, レオロジー的な観点からの見直しを行うことを目的として, スランプ試験のメカニズム, スランプ試験によって測定される値の物理的意味, フレッシュコンクリートの流動シミュレーション方法, スランプ試験を拡張してレオロジー定数を推定する方法などに関する研究の現状を紹介する。
著者
榎本 渉
出版者
国際日本文化研究センター
雑誌
日文研 = Nichibunken
巻号頁・発行日
vol.60, pp.2-3, 2018-03-31
著者
FUJITA Mikiko SATO Tomonori YAMADA Tomohito J. KAWAZOE Sho NAKANO Masuo ITO Kosuke
出版者
Meteorological Society of Japan
雑誌
気象集誌. 第2輯 (ISSN:00261165)
巻号頁・発行日
pp.2019-022, (Released:2018-12-17)
被引用文献数
4

We investigated extremely heavy precipitation that occurred around the Kinugawa River, Japan, in September 2015, and the probability of extreme precipitation occurrence, using data from a large ensemble forecast more than 1,000 members that were dynamically downscaled to 1.6 km horizontal grid spacing. The observed event was statistically rare among simulated cases and 3-day accumulated precipitation around the target area was equivalent to the 95th percentile among all simulated ensemble members. Our results show that this extreme precipitation event occurred under specific conditions: two coexisting typhoons at close proximity that produces a high atmospheric instability, and water vapor transport from the Pacific Ocean. We also assessed the probability of extreme precipitation in mountainous areas other than the Kinugawa River case. Heavy precipitation also occurred southwest of the Kinugawa River region due to two typhoons, similar to the Kinugawa River case. The tracks of these typhoons shifted marginally; however, there was a difference in the water vapor supplied to the area, causing heavy precipitation. The large-ensemble downscaled data used in this study hence enable us to evaluate the occurrence probability of a torrential rainfall event that was rarely observed, which may contribute to updating a disaster mitigating plan for possible similar disasters in future.
著者
森下 はるみ
出版者
バイオメカニズム学会
雑誌
バイオメカニズム学会誌 (ISSN:02850885)
巻号頁・発行日
vol.26, no.3, pp.132-136, 2002-08-01 (Released:2016-11-01)
参考文献数
9
被引用文献数
2

本論は,伝統芸能,バレエなど型や様式の決まっている舞踊について,身体訓練,身体意識,基本的な姿勢,跳躍・歩行・手や足使いの特徴をのべた.また演舞の生理的・運動的・心的階層を呼吸や心拍数・舞踊動作・自己意識との対応から考察した.対象は憑依舞踊から名人による至芸にわたる.さらに舞踊における「美しさ」とはなにかを論じた.
著者
小野田 崇 坂井 美帆 山田 誠二
出版者
日本知能情報ファジィ学会
雑誌
日本知能情報ファジィ学会 ファジィ システム シンポジウム 講演論文集 第27回ファジィシステムシンポジウム
巻号頁・発行日
pp.55, 2011 (Released:2012-02-15)

簡単で高速なアルゴリズムであるため,k-meansクラスタリング法は,様々な分野で広く伝われている。しかし,k-meansクラスタリング法によるクラスタリング結果は,初期クラスタリング中心の選び方によって大きく異なる。そこで本論文では,独立成分分析による初期クラスタリング中心選定法を提案する。また,様々なベンチマークデータに対し、提案方法と他の初期クラスタリング中心選定法を用いた場合のk-meansクラスタイング法の結果を比較し、その性能を評価する。実験の結果,ODPコーパスに対し,提案方法が有用であることが確認される。
著者
大内 佑子
出版者
一般社団法人 日本心身医学会
雑誌
心身医学 (ISSN:03850307)
巻号頁・発行日
vol.56, no.12, pp.1192-1196, 2016 (Released:2016-12-01)
参考文献数
2

Acceptance and commitment therapy (以下, ACT) を用いたケースでの心理教育の実践例について, 模擬事例をもとに報告した. 模擬事例としては, 医療現場での個別の心理療法の場面, その中でも心身医学的問題として過敏性腸症候群のケースを扱った. ACTの心理教育は, 随伴性と悪循環の理解を重視する点は従来の認知行動療法と共通するが, 疾患ごとのモデルや特定の症状モデルを用いることはほとんどないという点が異なる. ACTでは, クライエントが現実を体験することに重点を置くが, 並行してそれらの体験を通して体験の回避や認知的フュージョン, アクセプタンスとコミットメントという概念の理解を促進することも目的としている. したがってACTは, 他の療法に比しても心理教育的な要素を重視する心理療法ととらえることができるかもしれない.
著者
Junji ITO Hiroshi MORIYAMA Seiichiro INOKUCHI Noboru GOTO
出版者
オカジマ・フォリア・アナトミカ・ヤポニカ編集部
雑誌
Okajimas Folia Anatomica Japonica (ISSN:0030154X)
巻号頁・発行日
vol.80, no.2.3, pp.47-56, 2003 (Released:2008-01-18)
参考文献数
11
被引用文献数
13 30

Morphological study of the lower limb muscles is necessary for the analysis ofmuscle function and its relation to the aging process. In this study, we measured the muscle weight and the muscle fiber morphometry (cross-sectional area and total number of muscle fibers at the muscular belly, and muscle fiber size) of the human lower limb in an adult Japanese cadaver (male, 58 years old). The results presented here can provide the normal control data to elucidate the aging process of the human lower limb muscles. The morphological features in the human lower limb muscles were the pronounced enlargement of the gluteus maximus in the hip, the vasti muscles in the thigh and the soleus in the leg.

2 0 0 0 OA 東京名所

著者
井上安治, 小林清親 画
出版者
福田熊二良
巻号頁・発行日
vol.[9], 1877
著者
金 外淑 松野 俊夫 村上 正人 釋 文雄 丸岡 秀一郎
出版者
一般社団法人 日本心身医学会
雑誌
心身医学 (ISSN:03850307)
巻号頁・発行日
vol.58, no.4, pp.327-333, 2018 (Released:2018-05-01)
参考文献数
7

慢性痛のセルフマネジメントに有効とされる認知行動療法を取り上げ, 線維筋痛症患者に対する多元的な視点による痛みのアセスメントと, 痛みの変化や今ある痛みと上手に付き合うための支援について述べた. また, 地域での新しい取り組みとして, 痛みで困っている患者やその家族を対象とした, 心理教育を中心とするセルフヘルプ支援をグループで学ぶ認知行動療法を試みた. 4つの地域での自由記述と予備調査の結果, 患者と家族間の考え方のズレや葛藤が読み取れ, さらに痛みが起こりやすい考え方や行動タイプなどの共通点が推測された. 特に慢性痛に現れやすい痛み関連行動が起きやすい内的・外的状況を把握し治療環境を整えることが, 今後起こり得る痛み行動の予防につながることも再認識できた. 最後には, これらの結果を踏まえ, 症例でみる痛み関連行動が起こる前後の状況に応じた支援の実際について報告した.
著者
岡崎 祐一 Castaneda-Casas Jose Manuel Ortega-Zeifert Michel
出版者
公益社団法人 精密工学会
雑誌
精密工学会学術講演会講演論文集
巻号頁・発行日
vol.2006, pp.227-228, 2006

メカトロニクス研修の課題として,卓上型数値制御工作機械の開発を与え,加工機の機構設計,制御機器設計および数値制御ソフトウェアの開発を行った.既製モジュールを活用し,ユニークな直交3軸の加工機を試作した.モーションコントローラを用い,LabVIEWにて開発したGコードコンパチブルの数値制御装置は,マニュアル,MDI,プログラム実行,編集などの各モードを備える.特定のマイクロ形状を加工するプログラムも付加的に開発できた.小径ボールエンドミルを用い,高硬度アルミニウム合金やプリハードン鋼へも微細加工ができた.
出版者
慶応義塾
巻号頁・発行日
1907