著者
福盛 貴弘
出版者
大東文化大学教職課程センター事務室
雑誌
教職課程センター紀要 = Journal of Center for Teacher Development and Educational Research, Daito Bunka University (ISSN:24324140)
巻号頁・発行日
no.1, pp.99-106, 2016-12

本稿では、音声学的アクセントおよび音韻論的アクセントの観点から、現状のそのために、国語科教科書におけるアクセントの記述の問題点を指摘し、教育現場で生徒にアクセントを気付かせるにはどうすればいいのかということを示している。小中高の国語科教科書において、日本語のアクセントについてどのような記述がなされているかを確認し、それが適切な記述であるかを精査している。
著者
重政 香代子 森山 浩志
出版者
昭和大学学士会
雑誌
昭和医学会雑誌 (ISSN:00374342)
巻号頁・発行日
vol.59, no.5, pp.549-556, 1999-10-28 (Released:2010-09-09)
参考文献数
10

ヒト顎二腹筋の前腹と後腹を結ぶ中間腱の詳細な形態を検討するためにその形状, 支持組織, 滑液包様構造, 角度, 舌骨からの距離などの観察を行った.前腹側の腱膜形態と中間腱の支持形態をそれぞれ4型に分け, 顎二腹筋の中間腱部分の形状と舌骨との関係についての形態計測学的な評価を行い, 滑液包様構造物が加齢に伴なって増加することを見出した.顎二腹筋の中間腱部分についての教科書の記述は加齢変化を含めて修正の必要がある.
出版者
日経BP社
雑誌
日経ビジネス (ISSN:00290491)
巻号頁・発行日
no.908, pp.134-136, 1997-09-22

89年、世界中で5500万台を売り切り、今も任天堂に莫大な利益をもたらす「ゲームボーイ」。 30年の長きにわたり、これらの大ヒット玩具を次々と開発し、京都の中小企業にすぎなかった任天堂を"世界のNintendo"へと成長させるのに大きな役割を果たした男、それが横井軍平だ。 96年8月に製造本部開発第一部部長という要職を捨てて任天堂を退社。
著者
藤井 裕久
出版者
日経BP社
雑誌
日経ビジネス (ISSN:00290491)
巻号頁・発行日
no.1309, pp.161-164, 2005-09-26

9月11日の衆院選で民主党は大敗北を喫しました。代表代行という党の要職にあった僕自身、神奈川14区で落選した。ただ、僕を含めて民主党で負けた人間は、ほとんどが前回の衆院選を上回る票数を頂いている。僕でも1万票増えているんです。 これは何を意味しているか。「小泉(純一郎首相)さんではダメだ」と考える人の数が増えたのは事実です。
著者
瀬田 元吾
出版者
中央大学企業研究所
雑誌
企業研究 (ISSN:13479938)
巻号頁・発行日
no.34, pp.127-153, 2019-02-28

A quarter of a century has passed since the J-League, a professional football league, was established in Japan and Japanese football has continuing to grow, yet many professional football players have a big difficulties with "second career" after they retire as active players. That is not only an issue in Japan, and it is also a problem of the football world. It is very important to pre-consider future possibilities and which kind of educational environment one should prepare for prior to starting a professional career. After the disastrous result of the European Championship in 2000, the German football association (DFB) had established a new scheme, which cooperates professional football clubs and the elite schools approved by DFB, to discover and develop new talents. It was a huge revolution for German football, and it shows a significant improvement. This could be a very helpful reference for the Japanese football world. Author deliberates on how to advance the school education at the state of "zero carrier", before starting a "first career" as a football professional player in Japan.
著者
Muhammad Yousuf Memon Ilyas Sadiq Safdar Ali Malik Muhammad Bin Zulifqar Muhammad Saad Malik Muhammad Hammad Malik
出版者
The Editorial Committee of Annals of Vascular Diseases
雑誌
Annals of Vascular Diseases (ISSN:1881641X)
巻号頁・発行日
pp.oa.21-00027, (Released:2021-11-09)
参考文献数
29
被引用文献数
4

Objectives/Background: With decreased patient downtime and reduction in health expenditures, endovascular treatments have become popular for the treatment of venous insufficiency. In this study, we assessed the outcomes of using radiofrequency ablation (RFA) and sclerotherapy for refluxing veins and incompetent perforators in a developing country.Materials and Methods: Subjects were selected from an ongoing registry from October 15, 2015 to April 5, 2018. Patients were followed up until 6 months. Pre- and post-procedural Clinical, Etiologic, Anatomic, and Pathophysiologic (CEAP) scores were compared, and complications were documented and treated accordingly.Results: In total, 102 limbs (n=97) with 76 great saphenous veins (GSVs) and 26 small saphenous veins (SSVs) underwent RFA, with 79% undergoing concomitant sclerotherapy. Mean follow-up time was 188 days (±33.16). Moreover, 59% were males and 41% females. At the end of follow-up, 99% of the legs had complete occlusion. Pre- and post-procedural CEAP scores were 4.21±1.5 and 3.36±1.7, respectively (p-value <0.001). Endovenous heat-induced thrombosis (EHIT) types 1, 2, 3, and 4 were found in 8.8%, 3.9%, 1.9%, and 0% of the legs, respectively. Most common complications were pain and tenderness (51%), bruising (18%), and paresthesia (7%).Conclusion: RFA and sclerotherapy have proved to be safe and efficacious. Computed tomography (CT) venous mapping aids in delineating complex venous anatomy and in ruling out deep vein thrombosis (DVT) in cases with discrepancy on Doppler ultrasound. Strict compliance of procedural and post-procedural protocol can assure promising results and futuristic value.
著者
Yusuke Sato
出版者
The Pharmaceutical Society of Japan
雑誌
Chemical and Pharmaceutical Bulletin (ISSN:00092363)
巻号頁・発行日
vol.69, no.12, pp.1141-1159, 2021-12-01 (Released:2021-12-01)
参考文献数
192
被引用文献数
15

Considerable efforts have been made on the development of lipid nanoparticles (LNPs) for delivering of nucleic acids in LNP-based medicines, including a first-ever short interfering RNA (siRNA) medicine, Onpattro, and the mRNA vaccines against the coronavirus disease 2019 (COVID-19), which have been approved and are currently in use worldwide. The successful rational design of ionizable cationic lipids was a major breakthrough that dramatically increased delivery efficiency in this field. The LNPs would be expected to be useful as a platform technology for the delivery of various therapeutic modalities for genome editing and even for undiscovered therapeutic mechanisms. In this review, the current progress of my research, including the molecular design of pH-sensitive cationic lipids, their applications for various tissues and cell types, and for delivering various macromolecules, including siRNA, antisense oligonucleotide, mRNA, and the clustered regularly interspaced short palindromic repeats (CRISPR)-associated (Cas) system will be described. Mechanistic studies regarding relationships between the physicochemical properties of LNPs, drug delivery, and biosafety are also summarized. Furthermore, current issues that need to be addressed for next generation drug delivery systems are discussed.
著者
森崎修司 松本健一
雑誌
研究報告ソフトウェア工学(SE)
巻号頁・発行日
vol.2013-SE-179, no.35, pp.1-8, 2013-03-04

ソフトウェアが担う業務に特化した欠陥種別の検出を目的とするレビューは汎用的な欠陥種別の検出を目的としたレビューよりも修正コスト低減効果やスケジュール遅延リスク低減効果が大きいことが期待される.本論文では,金融業務を担うソフトウェアの開発に携わる熟練者へのヒアリングから得られた欠陥種別 “日付に関する欠陥” をもとに不具合情報を分析した.レビューでの検出が可能であった不具合 488 件のうち 86 件が日付に関する不具合であり,これらの不具合が他の不具合と比較して,スケジュール遅延リスク低減効果,修正コスト低減効果が大きく,統計的に有意な差があることがわかった.また,業務に特化した欠陥種別特定の計算機支援を目的とし,不具合情報の自由記述に含まれる単語を熟練者に提示したところ,支援が有用であるという意見を得た.
著者
山田 徹志 宮田 真宏 中村 友昭 前野 隆司 大森 隆司
出版者
一般社団法人 日本教育工学会
雑誌
日本教育工学会論文誌 (ISSN:13498290)
巻号頁・発行日
pp.44010, (Released:2020-11-27)
参考文献数
25

本論文では,保育分野(就学前教育・養育)において「子どもの育ち」を解釈する為の新たな方策として,子どもの位置・向き情報から関心を推定する分析手法の開発について報告する.我々はこれまでの研究から保育者が経験的に子どもの関心を読み取る際,子どもの位置・向きという行動特徴量を参照することを示した.同時に,人による関心状態の評価に対してベイズ推定を用いることで定量化できることが示唆された.これらをうけ本研究では,記録した保育活動場面の映像データ中の子どもの位置・向き情報と関心の対象について保育者によるアノテーションを実施した.その後,人手による関心記述の行動尤度と機械学習(HMM法,LDA法)による行動尤度を比較分析した.結果,取得した保育活動場面における幼児18名の関心の傾向は位置・向き情報から推定可能であることが示された.
著者
酒井 秀夫 坂本 和彦 竹居 宏道
出版者
森林利用学会
雑誌
森林利用研究会誌 (ISSN:0912960X)
巻号頁・発行日
vol.10, no.3, pp.233-242, 1995-12-15

アーティキュレイト式ホイールトラクタの全木集材時の走行速度を分析した。空車登坂時は勾配の影響が大きく,勾配が急になるにつれて速度が低下し,6°〜13°では速度が6km/時前後であった。雨上がりに勾配11°の直線路ではスリップが大きくなっていた。最小旋回半径が小さいため曲線半径の影響は小さく,R=8mでも直線区間に対する速度の低下は1km/時ほどであった。積載量が4.6m^3以下の直線区間の実車降坂では,勾配が約-7°以下では2.6〜14km/時と大きくばらついていたが,-6°〜-13°になると,2.4〜4.6m^3の積載量では4〜7km/時であり,勾配に対して速度調節の影響があらわれていた。同じ積載量でも末口吊りの方が元口吊りよりも速度が低かった。実車走行では曲線半径の影響が大きく,勾配-11°前後において,直線区間では4.5〜7.4km/時であるが,R=30mでは3.5〜5.5km/時に,R=8mでは2.2〜3.6km/時に低下していた。勾配-5.5°,R=20mでも曲線半径の影響が見られた。以上の結果は,全木集材時の路線設計に資することができる。
著者
野田 桂子 稲葉 治彦 山根 明臣 岩田 隆太郎 森下 加奈子 岡本 徳子
出版者
日本森林学会
雑誌
日本林学会大会発表データベース
巻号頁・発行日
vol.115, pp.P3059, 2004

1.はじめに ヒメヨコバイ科昆虫は農業害虫として知られている種が多いが,樹木害虫としてはあまり知られていない。本科に属するトチノキヒメヨコバイAlnetoidea sp.は,トチノキAesculus turbinata Blumeの葉裏に寄生する体長3mm程度の吸汁性昆虫である。トチノキは日本の暖温帯都市部において街路樹や学校・公園の緑化樹として広く植えられている落葉樹であるが,近年首都圏において早期退色・落葉の症状を呈している。本種がその原因となっている可能性が高く,薬剤散布により本種の防除を行った木と無処理木とでは,処理木のほうが明らかにトチノキ葉の葉緑素数が高いという結果が出ている。そこで防除の基礎として,トチノキヒメヨコバイ(以下「ヨコバイ」)の性比および越冬調査を行った。2.試料と方法2.1.試料 性比調査に使用したヨコバイ成虫は,2002年12月から2003年12月にかけて,神奈川県藤沢市亀井野日本大学湘南校舎図書館前のトチノキより採集した。また,2003年6月25日に捕虫網を使用して,同校舎図書館前トチノキ近辺を飛翔していたヨコバイ成虫を捕らえ,これも性比調査の試料とした。2.2.方法 ヨコバイの雌雄は,成虫の尾端部で見分けられる。♂は尾端が二裂し,二裂部よりも短い陰茎が突出するのに対し,♀は尾端に体長の1/4前後の長さの産卵管を有する。多数捕獲したヨコバイ成虫を,キーエンス社製デジタルHDマイクロスコープを使用して♂♀をカウントし,その性比を調べた。 ヨコバイの越冬形態や越冬場所を確認するため,2002年12月に近辺の常緑樹を対象としたビーティングネットによる越冬調査を行った。その際,リュウノヒゲ(ジャノヒゲ)およびオカメザサからヨコバイ成虫を発見し,常緑樹の葉裏で成虫越冬をすることが確認できた。 また,2003年7月に予備調査として,日本大学構内のトチノキ以外の樹木やその下生えにおいて,ビーティングネットを使用してのヨコバイ捕獲を試みた。しかしヨコバイは捕獲できず,宿主はトチノキに限られることが示唆された。 以上を踏まえて,2003年12月_から_2004年1月にかけて,日本大学構内の常緑植物を対象としてビーティングネットによるヨコバイ成虫の捕獲を行い,越冬場所とする常緑樹および多年生草本を記録した。また,ヨコバイ成虫が越冬場所を探す際,主宿主樹であるトチノキからどの程度の距離まで移動するのかを知るため,捕獲場所から最も近いトチノキまでの距離を測定した。3.結果 全体的に♀は♂よりも数が多く,捕獲したヨコバイ成虫1196頭のうち,♂nm = 422頭,♀nf =774頭で,性比nm / (nm+nf) = 0.35となった。 2003年6月25日にトチノキ近辺を飛翔していたヨコバイ成虫は,捕獲した47頭のうち,♂38頭,♀9頭と♂が多く,性比は0.81となった。また2003年7月30日の雨上がりには,多数のヨコバイ成虫が敷石や地面に張り付くという現象がみられた。この敷石に張り付いていたヨコバイは,捕獲した143頭のうち♂114頭,♀29頭とやはり♂が多く,性比は0.80であった。 越冬調査により,ヨコバイはリュウノヒゲ(ジャノヒゲ),オカメザサ,オオムラサキ,サツキ,ハナゾノツクバネウツギ,サザンカ,イヌツゲ,シラカシ,ヤマモモなど,主宿主樹であるトチノキの近傍に生える植物の葉裏を越冬場所として利用していることが判明した。移動距離は最長が52m,最短が3mであった。4.考察 トチノキの葉裏から採集したヨコバイの性比が0.35だったのに対し,飛翔中および敷石に張り付いていたヨコバイの性比はそれぞれ0.81と0.80であった。♂成虫は♀成虫よりも活発に活動するように思われた。 越冬調査では,直接道路に面している部分より,ほかの植え込みの陰や壁際などの風当たりが弱い部分に数多く見受けられた。日本大学構内にはトチノキ付近に常緑植物が多く植栽されており,それほど移動しなくとも越冬場所を見つけられる状態にあった。トチノキ付近に常緑植物がない場合は,さらに遠くまで移動するものと思われる。
著者
木村 俊明
出版者
日本建築学会
雑誌
日本建築学会構造系論文集 (ISSN:13404202)
巻号頁・発行日
vol.86, no.790, pp.1655-1663, 2021-12-01 (Released:2021-12-01)
参考文献数
24
被引用文献数
1

Since there is a close relationship between the form and force in the large span spatial structures, it needs to design a suitable structural form corresponding to the stress transmission. Furthermore, it is desired to construct efficiently with saving resources for reducing environmental loading. Structural engineers need to judge totally by considering various requirements (e.g. structural safety, aesthetics, constructability, and economics) for a short time. A structural rational form can be found easily using the optimization method. There are various studies of computational form-finding methods for large-span spatial structures. Recently, it has been applied for the realization of practical design. Generally, optimal shape tends to be a complex shape. According to the construction reports of its application, it can be confirmed that issues about constructability of complex shapes and reducing scaffolding material have been solved in the construction phase. It is significant to solve the construction problems during the early design phase by using optimization methods. Removing supports is one of the important construction processes for spatial structures. Generally, it is mentioned that depending on the support conditions during the removal process, the internal stress may be higher than those in the completed state in the RC large-span structures. From a point of view of safety, it is necessary to plan to remove supports carefully. Furthermore, planning for the construction process depends largely on the experience of the contractors/designers. In the case of complex shapes, it can be imagined that it involves a lot of trial and error and is extremely difficult. If the construction plan can be reasonably designed at the stage of the form-finding process, it will be possible to realize further resource-saving and efficiency of construction materials. There are a lot of studies about optimization for removing supports in the construction process of the truss or tensile structures. However, to the author's knowledge, there are a few studies for RC spatial structures. This paper presents a simultaneous optimization method for the large span spatial structures obtaining the process of removing supports in the construction and the shape of the completed state. An optimization problem is formulated to minimize the summation of the strain energy during removing supports. The optimization algorithm consists of two methods. The coordinates of B-spline control points are optimized using Sequential Quadratic Programming (SQP). Furthermore, Local Search (LS) is used for obtaining the order of removing supports. It is shown in the numerical examples that not only obtaining strain energy minimized shape, react force and stress are suppressed during the process of removing through optimization. In the case of a 2D arch, the optimal order is to start from the end with removing the center at last. In the removal phase, it is effective to leave the center support during the removal to reduce bending deformation. By using this method, it can realize the construction plan for the supports considering both structural safety and constructive efficiency. Moreover, the proposed methods require less computational cost than the heuristic method shown in the numerical example. In the optimization using NP2, it is possible to obtain the solution with less computational cost than using NP1. However, the order of removal of supports becomes complicated. From a point of view of practical design, this result needs caution to avoid mistakes in construction.
著者
河井 信行 畠山 哲宗 三宅 啓介 田宮 隆
出版者
医学書院
巻号頁・発行日
pp.1084-1092, 2021-09-10

Point・頭部外傷患者の急性期診療にあたり,高次脳機能障害に関して下記の点に留意する.・意識は「意識清明度(覚醒状態)」と「意識内容」の2つの要素で構成されており,覚醒状態のみで「意識清明」と判断しない.・早期にCTのみならずMRI(急性期には拡散強調像やFLAIR像,亜急性〜慢性期にはT2*像や磁化率強調像)を行い,微細な損傷を含め器質性病変の検出に努める.・急性症候性発作とてんかんを混同して「脳外傷後てんかん」と安易に診断しない.・軽症を含め,すべての頭部外傷患者に高次脳機能障害が発症する可能性について,患者・家族に説明する.