著者
池上 春香 永井 宏平 松橋 珠子 小林 直彦 武本 淳史 吉廣 卓哉 井上 悦子 樋口 智香 守田 昂太郎 内堀 翔 天野 朋子 田口 善智 加藤 博己 入谷 明 松本 和也
出版者
公益社団法人 日本畜産学会
雑誌
日本畜産学会報 (ISSN:1346907X)
巻号頁・発行日
vol.86, no.2, pp.141-152, 2015-05-25 (Released:2015-06-18)
参考文献数
17

黒毛和種肥育牛の枝肉形質を推定するバイオマーカー候補タンパク質の同定を目的に,枝肉形質情報ならびに腎周囲白色脂肪組織のプロテオーム解析情報を搭載した統合情報管理システムを運用し,プロテオーム解析データを持つ去勢牛200頭から,5つの形質(枝肉重量・ロース芯面積・バラの厚さ・皮下脂肪の厚さ・BMSナンバー)に関して上位と下位の2群を選抜して,この2群間で314個のタンパク質スポットの発現量と枝肉成績との関連性を検討した.各形質の上位群(平均値+標準偏差)および下位群(平均値−標準偏差)として抽出した個体間の各スポットのタンパク質発現量を比較した結果,合計でタンパク質45種類(90スポット)の発現量に有意な差が認められた.これらタンパク質の一部について,代謝経路における位置付けを行なうとともに,vimentinのウエスタンブロット解析より発現量を検証したところ,枝肉形質を推定するバイオマーカー候補タンパク質としての可能性が示唆された.
著者
小堀 景一 植木 光生 府川 敦 鈴木 寿
出版者
一般社団法人粉体粉末冶金協会
雑誌
粉体および粉末冶金 (ISSN:05328799)
巻号頁・発行日
vol.34, no.5, pp.217-221, 1987-07-25 (Released:2009-05-22)
参考文献数
3

Mechanical properties, cutting performance, etc., of WC-β(WC/TiC=70/30)-TaC-TiN-Co alloy (cobalt contents, 8-8.5%) sintered in vacuum and nitrogen (PN2=2.7 kPa) were studied as a function of TiN/(TaC+TiN) ratios (named TiN ratios).The grain size of βt(WC-TiC-TaC-TiN solid solution) decreased with increasing TiN ratios and it naturally more decreased in sintering in N2, without change in the grain size of WC. The transverserupture strength, in particular, of HIP-treated alloy sharply increased with TiN ratios of more than 0.2. It was found that the resistance to oxidation of alloys was markedly improved with increasing TiN ratios.The results of cutting tests showed that the fracturing and flank wear resistances were scarcely affected by TiN ratios, but the cutting performance of the alloy sintered in vacuum was always superior to that of the alloy sintered in N2.
著者
新堀 歓乃
出版者
The Society for Research in Asiatic Music (Toyo Ongaku Gakkai, TOG)
雑誌
東洋音楽研究 (ISSN:00393851)
巻号頁・発行日
vol.2006, no.71, pp.1-20, 2006

ご詠歌とは仏教的内容を持つ詞に節を付けた歌謡で、巡礼や葬式など様々な仏教儀礼でうたわれる。ご詠歌の詠唱はうたい手が自らの信仰を表現する手段のひとつであり、その信仰は不変のものとみなされるため、ご詠歌の詞や節を個人の趣向で勝手に変えることは許されず、常にひとつの「正しい」詠唱法が求められる。しかし、この「正しい」詠唱法を伝えるはずの楽譜は幾度も書き替えられ、また、実際の詠唱や口伝内容も時代とともに変容してきている。では、なぜ楽譜と口頭伝承を変容させてしまうことが、ご詠歌を「正しく」伝承することであるとみなされ得るのか。この問いに答えるべく、本稿では密厳流のご詠歌を例に挙げて、楽譜と口頭伝承が変容する過程を分析した結果、その変容のしくみを以下のように説明できた。<br>ご詠歌は、伝授者である師範から被伝授者である在家の一般信者へと規範が提示されることによって伝承される。その規範とは師範が「正しい」と認識している詠唱法であり、これが楽譜と口頭伝承を通じて伝えられる。そのとき、師範は正確な伝承を達成しようとする一方、自己の個性を表現しようとするため、師範各々の詠唱間にはしばしば相違が生じ、それゆえ、ご詠歌の伝承にはある種の不完全さが伴う。たいていの場合、師範はこの不完全さを「詠唱の幅」と呼び、豊かな音楽性として評価する。しかし、ご詠歌を「正しく」伝承しようとする意識から、師範たちが伝承の不完全な部分を「正しくない」「規範に反する」と判断した場合、師範同士で会議を開いてご詠歌の「正しさ」をめぐって議論し、規範を再構築する。そして、新たな規範と従来の楽譜や口頭伝承との間に齟齬が生じた場合には、新たな規範に従って楽譜と口頭伝承を変更する。それゆえ、楽譜と口頭伝承を変容させることが、ご詠歌を「正しく」伝承することであるとみなされ得るのである。
著者
藤井 恵子 赤堀 博美 川辺 知子 川畑 章子 大越 ひろ 中濱 信子
出版者
一般社団法人 日本調理科学会
雑誌
日本調理科学会誌 (ISSN:13411535)
巻号頁・発行日
vol.34, no.3, pp.261-269, 2001-08-20 (Released:2013-04-26)
参考文献数
33

Milk jelly samples made with six different gelling substances, agar, gelatin, l-carageenan, corn starch, sodium alginate and LM pectin, were prepared, and the physical properties of these samples were investigated. The rupture stress of all samples was the same. The rupture strain of the agar milk jelly was the lowest, while the values for the elasticity of the Hookean and Kelvin-Voigt bodies, and the viscosity of the Kelvin-Voigt body of the agar milk jelly were the highest. On the other hand, the values for the elasticity of the Hookean body and viscosity of the Newtonean body of the gelatin milk jelly were the lowest. The melting temperatures of the agar, LM pectin, l-carageenan and gelatin milk jelly samples were 84.1°C,55.8°C,52.3°Cand 30.3°C, respectively. While there was marked syneresis of the agar milk jelly, there was little with the alginate milk jelly and LM pectin milk jelly. A sensory evaluation judged the agar and gelatin milk jelly samples to be palatable, while the LM pectin and alginate milk jelly samples were judged to be unpalatable.
著者
岩垂 素子 大橋 史武 土屋 亮 梶原 逸朗 堀江 三喜男
出版者
一般社団法人日本機械学会
雑誌
日本機械学会関東支部総会講演会講演論文集
巻号頁・発行日
vol.2004, no.10, pp.209-210, 2004-03-03

H_2 controller is designed with the reduced order model of smart pantograph structure which is obtained by finite element and modal analyses. The control force is applied by the piezoelectric film actuator and the feedback signals are detected by the accelerometer in the system. The vibration response is suppressed by modal control. The placement of the piezoelectric actuator and the H_2 control system are simultaneously optimized by using GA to achieve an enhanced vibration control performance. It has been verified by simulations that the enhanced performance for the vibration suppression can be achieved by the present method.
著者
堀口 悟史 井垣 宏 井上 亮文 星 徹 岡田 謙一
雑誌
研究報告グループウェアとネットワークサービス(GN)
巻号頁・発行日
vol.2013, no.17, pp.1-6, 2013-01-09

本研究では,プログラミング講義中の受講生の状態を講義後に詳しく見直すことで,講義各回や全体の改善支援を目的とする.この目的を達成するため,著者らが開発したシステムで記録した受講生の講義時間中の状態ログを,講義後にさまざまな観点から見直すことができるリフレクション支援ビューを提供する.提供されるビューはウェブ上で動作するブラウザベースのシステムである.本稿では,実際の講義で取得したログからどのような改善点が見つかるかを議論する.評価実験として,受講生 12 名によるプログラミング講義において講義時間中の状態ログを収集し,分析を行った.結果として講義資料の内容が十分であるか,遅れている学生へのフォローが効果があったのか等の議論をすることができた.
著者
西村 功 山田 俊一 坂本 光雄 近藤 明洋 小堀 鐸二
出版者
日本建築学会
雑誌
日本建築学会構造系論文集 (ISSN:13404202)
巻号頁・発行日
vol.63, no.505, pp.61-68, 1998
被引用文献数
4 1

Discussed in this paper is the vertical load supporting mechanism of laminated rubber bearings with hollow circular sections. The compressive stiffness of the hollow circular rubber bearings is analytically studied. Key issues discussed in this paper are 1) derivation of the governing equation that determines the compressive stiffness of the device 2) effect of bulk modulus on the compressive stiffness 3) proposition of a simple formula which is close to the rigorous solution. As a result of this analytical study, the compressive stiffness of the rubber bearings is proved to be 20 % smaller than is expected from the commonly used conventional model.
著者
石井 百葉 小山 美佳 小高 栄美 佐藤 千春 鈴木 剛紀 高橋 雅一 武内 八重子 立石 亜紀子 永峰 由梨 堀池 尚明 大学図書館職員研修ワーキング・グループ
出版者
国立大学図書館協議会
雑誌
大学図書館研究 (ISSN:03860507)
巻号頁・発行日
vol.86, pp.11-18, 2009-08

大学図書館職員研修「ad!ライブラリー~大学図書館効果的広報戦略~」は、平成20年度の国立大学図書館協会東京地区協会・関東甲信越地区協会の助成事業として開催された。異なる機関に所属する採用6~9年の職員をメンバーとするワーキング・グループが、この研修会を企画・運営した経緯を報告する。
著者
堀井 希依子
出版者
共栄大学
雑誌
共栄大学研究論集 (ISSN:13480596)
巻号頁・発行日
vol.10, pp.121-140, 2012-03-15

本研究は、看護師の離職防止対策の示唆を得ることを目的として、1)自己効力感、達成動機、キャリアレジリエンス、キャリアパースペクティブの各要因が組織コミットメントに対してどのような効果を持っているのか、2)組織コミットメントは職業継続意思にどのような効果を持っているのかをキャリアステージ別に検討する多母集団解析を実施した。調査は、801 名の女性看護師を対象に実施した。分析の結果、中期キャリアにある看護師の組織コミットメントを規定する要因は他のキャリアステージのそれとは異なっていることに加えて、組織コミットメントが低い傾向が見出された。以上の結果から、中期キャリアにある看護師の離職防止を強化する必要性が示唆された。
著者
高台 真太郎 上西 崇弘 市川 剛 山崎 修 松山 光春 堀井 勝彦 清水 貞利 玉森 豊 東野 正幸 久保 正二
出版者
一般社団法人日本消化器外科学会
雑誌
日本消化器外科学会雑誌 (ISSN:03869768)
巻号頁・発行日
vol.40, no.1, pp.50-55, 2007-01-01
被引用文献数
6

肝癌切除後の孤立性リンパ節転移を摘除することで,術後2年6か月の現在,無再発生存中の症例を経験したので報告する.症例は58歳の男性で,C型慢性肝炎に伴う肝癌に対して肝切除術を2回施行されていた.経過観察中のCT像上,肝尾状葉に約4cm大の腫瘤性病変を認め,AFP, PIVKA-II値の著明な上昇がみられた.腹部血管造影像では腫瘤は中肝動脈および左胃動脈より栄養される腫瘍濃染像として描出され,肝癌の尾状葉再発と診断し開腹した.腫瘍は肝尾状葉に接するように総肝動脈の腹側に存在していたが,肝臓からは独立しており肝癌の総肝動脈幹リンパ節転移と考え摘除した.病理組織学的検査では中分化型肝癌のリンパ節転移と診断された.AFP, PIVKA-IIは術後2か月日に標準値範囲内へ低下し,以来,再発徴侯を認めていない.原発巣がコントロールされた肝癌の孤立性リンパ節転移は摘除により良好な予後が得られる可能性が示唆された.

1 0 0 0 OA 昇華の価値論

著者
堀川 聡司
出版者
京都大学大学院教育学研究科
雑誌
京都大学大学院教育学研究科紀要 (ISSN:13452142)
巻号頁・発行日
vol.61, pp.163-174, 2015-03-31
著者
江口 孝雄 堀 貞喜
出版者
公益社団法人 東京地学協会
雑誌
地学雑誌 (ISSN:0022135X)
巻号頁・発行日
vol.116, no.3-4, pp.325-369, 2007-08-25 (Released:2009-11-12)
参考文献数
142
被引用文献数
1

We present a new view of the morphology of slab (s) subducted just beneath the Tokyo Metropolitan Area in Japan. Previously, several different models of the surface geometry of the subducted Philippine sea plate slab (PH slab) have been published mainly using seismicity data (e.g., Nakamura and Shimazaki, 1981; Maki, 1984; Kasahara, 1985; Ishida, 1992; Noguchi, 1998; Hori, 2006).In this study, first we discriminate a previously unknown seismic slab (called slab SG, or seismic slab SG) above the downgoing Pacific plate slab (PC slab), second identify the possible internal structure of slab SG, and third demonstrate tectonic evolution models. It is clear that the currently known surface contours of PH slab indicate the shallowest part of slab SG as well.Most previous studies assumed a PH slab with a constant thickness, and paid little attention to the tectonic characteristics of the vertical extent and/or the bottom geometry of slab SG with variable thickness. The bottom extent of the seismic slab SG beneath the Metropolitan area reaches 36.5N at least. The horizontal extent of seismic slab SG covers most of the lowland Kanto Plain. The bottom depth of slab SG is approximately 120 km near 36.5N and 139.0E, being the same as the surface depth of the PC slab there. Below the Sagami Trough axis near 34.5N and 140.0E, the lowest portion of slab SG is located at a depth of 80 to 90 km. The western bottom end zone of slab SG generally strikes in the NNW-SSE direction, being approximately parallel to the volcanic front.We suggest four basic morphology models of slab SG as follows. (1) Slab SG consists of both the PH slab at a shallower depth and a deeper underlain slab (slab SL). (2) A bookshelf-like configuration of northwardly inclined multi-slabs on the PC slab due to the intermittent southward shift of accumulation sites of short slab tips with episodic subduction at just south of the previously active paleo-Sagami Trough (s). We emphasize that the above evolutional bookshelf model is, to some extent, similar to the sediment layer accretion process near the deep trench system, but the dynamic situation is not the same. (3) A structure combining models (1) and (2). (4) Slab SG is merely the eastern part, having been cooled by the downgoing PC slab, of 65-70 km thick lithosphere of the Izu Outer Block (JOB) without any other slab components.To clarify the structure of the SG slab in more detail, we should incorporate high-gain seismic data from the on-line operating dense seismic observation network deployed at both marine and land areas covering the metropolitan area. In addition, we must study the effects of 3D mantle wedge circulation with dehydration process due to the subduction of both PC and PH slabs from different directions, as well as the space-time evolution history of accretion tectonics at the northern end zone of the Philippine sea plate.
著者
堀井 憲爾 原田 達哉 河野 照哉 河村 達雄 小崎 正光 赤崎 正則
出版者
名古屋大学
雑誌
総合研究(A)
巻号頁・発行日
1985

IMV交流送電の次の高電圧電力技術の基盤となるべき4つのテーマについて協同実験及び各個研究により、総合的検討が行われ次のような成果が得られた。1)超々高圧架空送電の研究として、2MV交流および1MV直流について、線路気中絶縁の問題、特に開閉サージフラッシオーバとコロナ・イオン流などの環境問題について協同実験による検討が行われ、絶縁・環境の両面からみて、1MV直流送電の方が開発の実現性が高いことが示唆された。2)架空送電に代わる新送電システムの研究として、しゃへい導体大気送電は、建屋内に電線を収納することにより、絶縁の縮少化・高信頼化ができ、環境問題にも対処できること、また、地中洞道内に電線を引込む方式と共に、架線空間に大気圧の【SF_6】ガスまたは空気との混合ガスを封入することにより新しい大容量の超高圧送電線を実現できる可能性が協同実験で示された。また、新しい地中ケーブルとして、押出しポリエチレン絶縁に【SF_6】ガスを含浸する方式、及び極低温超電導ケーブルなどについてモデルによる実験が実施され、今後の開発への道程が示された。3)UHV・EHV送電の極限絶縁設計の研究は、送電線の絶縁設計基準と試験法を再検討し、信頼性と経済性の接点を探ろうとするものである。耐雪設計の見直しとして、冬期雷の特異性とその対応が検討され、絶縁材料の改良開発として、有機材料の部分放電劣化、ZnOバリスター素子の劣化、ベーパミスト絶縁の耐電圧特性などが検討された。4)極限高電圧(50MV)の発生と測定に関する技術として、前駆リーダ放電、残留インダクタンス、直列火花ギャップの問題と対策及び光電変換分圧測定器が検討され、新しい発生器として直径60mのバルーンによるファンデグラフ方式が提案、検討された。
著者
堀清治
出版者
東京医学社
雑誌
JOHNS
巻号頁・発行日
vol.11, no.9, pp.1281-1288, 1995
被引用文献数
1
著者
山下 辰夫 堀田 幸平 佐藤 克信 林 大介 北波 赳彦
出版者
京都産業大学
雑誌
高等教育フォーラム (ISSN:21862907)
巻号頁・発行日
no.5, pp.197-203, 2015

近年は大学にグローバル人材の育成が求められており,京都産業大学は,2012 年に文部科学省の「グローバル人材育成推進事業」に採択され,その構想調書のなかで事務職員の語学力向上についても言及している。グローバル人材の定義は様々であり,もちろん一般教養をはじめとした能力も求められるが,語学能力は必須であり,京都産業大学では事務職員を対象に海外語学研修を毎年実施している。本稿は2014 年の夏にタイのチェンマイ大学で今年度より新たに実施された研修に参加した5 名の報告をまとめたものである。研修の内容を中心にまとめており,次年度以降に本研修が継続されるかは現時点では未定であるが,もし継続されるのであれば本稿が研修参加者の参考となれば幸いである。また,本プログラムがより良いものとなるために帰国後に行った振り返りをもとに研修プログラムへの改善等についても言及している。
著者
平井 浩一 小田和 友仁 岡本 高幸 二宮 温 住元 真司 高木 将通 Balazs Gerofi 山口 訓央 小倉 崇浩 亀山 豊久 堀 敦史 石川 裕
雑誌
研究報告システム・アーキテクチャ(ARC) (ISSN:21888574)
巻号頁・発行日
vol.2015-ARC-215, no.2, pp.1-8, 2015-05-19

将来の HPC 向けの OS としては,メニーコアへの最適化が必須となってきており,それを実現するための OS として McKernel を選択し,計算センターにおけるバッチジョブ運用への適応を進めている.本論文では,将来のスーパーコンピュータ上で,McKernel に適応したバッチジョブ運用を実現する場合の課題を述べ,現状の検討状況について述べる.
著者
堀 哲理 東野 武史 塚本 勝俊 小牧 省三
出版者
一般社団法人電子情報通信学会
雑誌
電子情報通信学会技術研究報告. MoMuC, モバイルマルチメディア通信 (ISSN:09135685)
巻号頁・発行日
vol.109, no.380, pp.1-6, 2010-01-14

高度道路交通システム(ITS: Intelligent Transport Systems)におけるマイクロ波帯の周波数のheterogeneous無線サービスを,車車間中継を介して車内の無線端末へ提供するための広帯域異種無線通信基盤を構築することが求められている.本研究では,既存の無線サービスをその信号形式を変更することなくミリ波帯へ周波数変換し,車内の移動体端末へ転送する際の,車車間マルチホップ無線チャネルの信頼性を向上させるため,車載マルチアンテナを用いた空間分割多重化(SDM: Space Division Multiplexing)の適用を提案し,その特性評価を行う.