著者
桜井忠温 著
出版者
新紀元社
巻号頁・発行日
1942

1 0 0 0 OA 透析液の変遷

著者
友 雅司
出版者
一般社団法人 日本人工臓器学会
雑誌
人工臓器 (ISSN:03000818)
巻号頁・発行日
vol.46, no.1, pp.55-59, 2017-06-15 (Released:2017-09-15)
参考文献数
8
著者
常田 賢一
出版者
公益社団法人 土木学会
雑誌
土木学会論文集A1(構造・地震工学) (ISSN:21854653)
巻号頁・発行日
vol.65, no.1, pp.811-820, 2009 (Released:2011-04-30)
参考文献数
13

2008年岩手・宮城内陸地震では,地震時の地すべりや斜面崩壊を誘因とする天然ダムおよび土石流が地震災害の主要な特徴として着目された.いずれの現象も地震時の災害形態として認識されているが,既往地震での事例が少ないことから,当該地震の事例は貴重であり,それらの特性を吟味する意義は高い.本研究は,2008年岩手・宮城地震および既往地震における天然ダムおよび土石流の事例に基づいて,それぞれの形成特性および発生特性の検討を行った.そして,2008年岩手・宮城内陸地震(14事例)と既往地震(11事例)の天然ダムおよび土石流(2事例)の要因分析および要因間の関係の考察から,地震に起因する天然ダムの形成特性および土石流の発生特性に関する幾つかの知見を得た.
著者
高橋 竜太郎 池田 心
雑誌
研究報告ゲーム情報学(GI) (ISSN:21888736)
巻号頁・発行日
vol.2018-GI-39, no.10, pp.1-7, 2018-02-23

将棋や囲碁,麻雀など多くのゲームでコンピュータプログラムが十分強くなり,より複雑なゲームやより高次な目的に関心が移りつつある.「ぷよぷよ」 は二十年以上遊ばれる人気の落ちものパズルゲームであるが,これも近年十分強いコンピュータプログラムの作成が達成された.本研究では,“連鎖構成” というこのゲームの中心的課題の一つに着目し,連鎖構成を身につけられれば楽しめる一方でこれができずに上達を諦めてしまう人が多い現状を解決したいと考える.そのためには,連鎖構成に特化した問題群,いわゆる 「なぞぷよ」 「詰めぷよ」 を沢山与えることが有効であると考える.人手により多くの良い問題が作成公開されているが,プレイヤごとの技術レベルや嗜好に合わせた問題が自動で無数に作成できれば,ぷよぷよを続ける人が増えることが期待できる.我々は,ランダム生成検査方式と,逆向き生成方式の二つのなぞぷよ作成法を試みる.さらに,作成された問題の 「難しさ」 「面白さ」 「役立ち度」 などを推測する関数を機械学習によって構成することを試みる.これらにより,プレイヤのレべルや好みにあった問題だけを提示するシステムを提案する.
著者
高橋 仁大 前田 明 西薗 秀嗣 倉田 博
出版者
一般社団法人 日本体育学会
雑誌
体育学研究 (ISSN:04846710)
巻号頁・発行日
vol.51, no.4, pp.483-492, 2006 (Released:2008-01-25)
参考文献数
21
被引用文献数
1 2

The purpose of the present study was to elucidate tactical strategies for winning a tennis match. Forty-two men's singles matches in the 1997 and 1998 Kyushu collegiate tennis championships were analyzed. Analytical criteria were the relationship between point-winning at each score and the techniques used. In the present research, techniques were categorized into the following 5 groups: service, return, stroke, offense and defense. The following results were obtained: 1. Stroke was the most frequently utilized technique regardless of point-winning. 2. Return and defense techniques, which are considered “passive” techniques, produced significantly high rates of point-losing. 3. The rate of point-winning by service was low at high rate counts (HRC), but high at low rate counts (LRC). In contrast, the rate of point-losing by service was high at LRC-game-points. The rate of point-winning by service was higher for players leading in score, and was low at important scores. 4. The rate of point-winning by players using the defense technique was high at HRC-opponent's game-points. To win a point using passive techniques is the most important tactic at opponent's game-points. 5. The rate of point-losing during the offense technique was high at LRC-up counts. Offense techniques are effective for winning points; however, they involve a higher risk of losing points. These results indicate that players should analyze the relationship between point-winning and strategies at each score.
出版者
巻号頁・発行日
vol.第128冊,
著者
Yoshikuni Kitamura Takafumi Watanabe Yukari Kato WeiWei Teoh Keiko Kataoka Yuki Yamaguchi Tomohiro Haruta Hideo Nishioka Kiyokazu Kametani
出版者
The Japanese Society for Horticultural Science
雑誌
The Horticulture Journal (ISSN:21890102)
巻号頁・発行日
pp.UTD-003, (Released:2018-06-19)
被引用文献数
1

Information about mechanical reinforcement of decorative organs could help development of a novel technique that would give flowers with robust floral organs and broadly contribute to postharvest flower preservation. Hydrangeas (Hydrangea spp.) exhibit remarkable characteristics in terms of mechanical reinforcement of decorative sepals. Although decorative sepals at the flowering stage shrink when they are desiccated, decorative sepals after flowering maintain their shape even after desiccation. In this study, the lignifications of the vein cells in decorative sepals were analyzed using phloroglucinol/HCl-staining. The microstructure of the cell wall was analyzed using transmission electron microscopy (TEM). The three-dimensional structure of vein cells was analyzed using serial block-face scanning electron microscopy (SBF-SEM). Tubular- and spindle-shaped dead cells with a lignified pitted secondary cell wall were observed around the vessel elements in decorative sepals after flowering. These cells were observed as living cells without a secondary cell wall in the veins of decorative sepals at flowering and in fully expanded leaves. Further, 10 hydrangea cultivars were analyzed for development of mechanical reinforcement in vein cells, and some of them were compared by desiccation testing. Decorative sepals of a cultivar lacking those cells exhibited shrinkage after flowering when they were desiccated. In conclusion, dead cells with a lignified pitted secondary cell wall contribute to the reinforcement of veins in decorative sepals of hydrangeas and become sclerified parenchyma cells. Axial parenchyma sclerifying in veins after flowering is essential for robust hydrangea floral organs and represent a new type of mechanical reinforcement tissue in plant decorative floral organs.

1 0 0 0 OA 開目鈔 2巻

著者
日蓮
出版者
巻号頁・発行日
vol.[2],

1 0 0 0 OA 骨粗鬆症

著者
折茂 肇 水野 有三
出版者
一般社団法人 日本老年歯科医学会
雑誌
老年歯科医学 (ISSN:09143866)
巻号頁・発行日
vol.8, no.1, pp.1-13, 1993-09-30 (Released:2011-12-05)
参考文献数
28
著者
小島 正明
出版者
Brewing Society of Japan
雑誌
日本醸造協会誌 (ISSN:09147314)
巻号頁・発行日
vol.105, no.5, pp.294-299, 2010 (Released:2012-02-24)
参考文献数
24
被引用文献数
1

味噌は塩分が多いという固定概念から,味噌と高血圧に関する十分なデータがないのにも拘わらず味噌の消費が減少している。そこで,著者らは味噌の消費拡大を目的として,食塩を添加しなくても腐敗することのない大豆発酵物(無塩味噌粉末)の安定した製造方法を確立している。今回はこの無塩味噌粉末のデザート,チーズ製品,総菜への応用と,生理学的機能性としてアレルギーやアトピー症状の軽減や抗肥満効果が期待できることを解説いただいた。
著者
岡 慎一
出版者
一般社団法人 日本内科学会
雑誌
日本内科学会雑誌 (ISSN:00215384)
巻号頁・発行日
vol.98, no.11, pp.2809-2813, 2009 (Released:2012-08-02)
参考文献数
10

新薬の開発により今後の治療法に新しい流れを生み出そうとしている.そんな中で,もっとも期待されているのが,新規プロテアーゼ阻害薬であるダルナビルとインテグラーゼ阻害薬であるラルテグラビルであろう.現在の併用療法は,必ず2種類の核酸系逆転写酵素阻害薬(NRTI)が含まれている.しかし,治療の長期化に伴い,NRTIの慢性毒性が問題となっている.これら新薬を用いた,NRTIを含まない新しい併用療法への期待が高まる.
著者
吉村 一樹 保坂 知幸 安川 義人 石井 英二 小倉 清隆 澤田 恵介
出版者
一般社団法人 日本機械学会
雑誌
日本機械学会論文集 (ISSN:21879761)
巻号頁・発行日
vol.84, no.861, pp.18-00068-18-00068, 2018 (Released:2018-05-25)
参考文献数
19

Reduction of particulate matter (PM) in exhaust gas from automobile engines is in high demand. Fuel stuck on the engine wall causes incomplete combustion, and generates a large amount of PM. To prevent this, shape of fuel injection spray must be controlled with precision. We focused on the valve offset of the injector as a factor influencing the spray shape. Computational analysis was conducted to investigate the effects of the valve offset on inner nozzle flow and spray shape (spray direction and liquid penetration). Simulated spray behavior image, footprint, and liquid penetration agreed well with experimental results. From the inner nozzle flow simulation results with the valve offset, it was found that fuel tends to flow in the direction of the valve offset near a sac in the nozzle to provide the fuel to the holes. This flow was caused by the smaller flow path fomed in the valve offset direction. From the spray simulation results, shifts in the spray direction of the plumes were caused by the flows near the sac. Some plumes were injected in the direction opposite to the valve offset. The holes with larger drill angle located in the valve offset direction, and larger valve offset caused larger changes of spray directions. Furthermore, liquid penetration was investigated. We showed that the flow separation in the holes caused by the valve offset affects the velocity distribution at the hole outlet and results in changes of the penetration length when the drill angle is small. It was found that the valve offset causes the change in the inner nozzle flow, and results in the change of the spray shape. We concluded that the correlation of nozzle geometry and valve offset is important for controlling the spray shape.
著者
堀田正敦 編
出版者
巻号頁・発行日
vol.[292],