著者
林 健太郎 久野 義徳 白井 良明
出版者
一般社団法人情報処理学会
雑誌
情報処理学会論文誌 (ISSN:18827764)
巻号頁・発行日
vol.40, no.2, pp.556-566, 1999-02-15
被引用文献数
9

本論文では 画像から抽出した上半身の3つの特徴点を基準とし 手の3次元位置 方向を計測する手法を提案する. 著者らが先に発表した手法では 3次元情報を計算する際に基準となるアフィン座標系を作るための4つの特徴点をユーザの体から抽出していた. このとき 4点は同一平面上にあってはならないので ユーザの姿勢は大きな拘束を受けていた. 本論文では アフィン座標系を作る特徴点のうちの3点を体上にとり その3点が作る平面の法線上の1点を仮想的な4点目とする. このようにすれば3つの特徴点でアフィン座標系が作れるので ユーザの姿勢を拘束しないヒューマンインタフェースを構築できる. 実験として シミュレーションによって仮想基準点を求める手法を検証する. また 応用例として本手法を用いたプレゼンテーションシステムを構築し ヒューマンインタフェースとして有効であることを示す.This paper describes a method to measure the user's 3D hand position and orientation using 3 features on the upper body of the user. The method proposed by the authors before used 4 feature points attached on the user's body. The user's pose was restricted because these 4 features must not be coplanar. Thus, we propose to use a virtual feature as the 4th feature, which is calculated by using the normal direction of the plane made by the 3 features. This method allows the user to move freely. The experimental results show that the proposed method is useful for the interface of presentation systems.
著者
島本 浣
出版者
美学会
雑誌
美学 (ISSN:05200962)
巻号頁・発行日
vol.38, no.1, pp.13-25, 1987

Au XVIII^e siecle le discours de la critique d'art, au sens etroit du terme, semble motive par la connaissance des valeurs plastiques de la representation picturale. On peut donc mettre Chardin au meme niveau que les peintres d'histoire. Avec R. de Piles et son Cours de Peinture nous tentons de montrer un des champs, ou cette valeur est theorisee, en analysant ce traite sur les trois parties principales composant la peinture. A la difference des idealistes classiques qui mettent les parties (composition-dessein-coloris) en rapport hierarchique, R. de Piles, parce qu'il pense qu'un oeuvre pictural, qui doit seduire les yeux, ne se realise qu'a travers un systeme organique des parties, les place dans un rapport d'egalite. Ce systeme, c'est-a-dire celui de la representation, produit une valeur picturale et s'ouvre aussi sur tous les genres de la peinture. Ainsi R. de Piles au XVIII^e siecle ouvre la voie a la critique dite "picturale."
著者
斉藤 誠一
出版者
日本教育心理学会
雑誌
教育心理学研究 (ISSN:00215015)
巻号頁・発行日
vol.33, no.4, pp.336-344, 1985-12-30
被引用文献数
3

The purpose of this study was to investigate the relationship between pubertal growth and sex-role formation. In a first study, a sex-role scale for early adolescents, containing 9 masculine items and 6 feminine items, was constructed. In a second study, recognition and acquisition of masculine traits and feminine traits were related to variables concerning pubertal growth. The main results were as follows: 1)Height had little influence on either recognition or acquisition of masculine traits and feminine traits. 2)Mature boys showed significantly higher level of masculine trait acquisition than immature boys. 3)Both boys and girls who were satisfied with the important parts of their bodies showed significantly higher level of masculine and feminine trait acquisition. 4)It was found in both males and females that the level of acquisition of masculine traits and feminine traits were associated with some of the variables concerning pubertal growth, without recognition of them.
著者
中鉢 憲賢
出版者
一般社団法人電子情報通信学会
雑誌
電子情報通信学会技術研究報告. US, 超音波 (ISSN:09135685)
巻号頁・発行日
vol.99, no.527, pp.31-34, 1999-12-21
被引用文献数
1

1912年のタイタニック号の海難事故がきっかけとなり超音波計測の研究が本格的にスタートした。とくに、光や電磁波では計測が困難な分野への応用をめざした研究が進められ、材料の弾性的性質の計測や超音波非破壊検査から最近の医用超音波診断装置まで、超音波計測のの発展は目覚ましい。また、戦後の固体物理の研究の進展は超高周波超音波技術の開発を促進し、微小物質の計測のための高分解能化が進み、超音波顕微鏡が開発され、現在では超音波マイクロスペクトロスコピーの研究分野へと発展し、新しい物質材料の研究や、マイクロデバイスの非破壊評価に応用されている。本文では筆者が携わってきた超音波の計測への応用に関して、特に印象に残っているトピックスに関連してレビューしてみたい。
著者
濱口 雄人 有末 宏明
出版者
大阪府立工業高等専門学校
雑誌
大阪府立工業高等専門学校研究紀要 (ISSN:0387365X)
巻号頁・発行日
vol.42, pp.27-34, 2008-07

Napier's constant is computed in ultra high precision. Using the Divide and Rationalize method and the Fast Fourier Transform, the CPU time to calculate the constant in digits N has been reduced drastically to be proportional to N(log N)^3. We obtained the constant in 500,000,000 digits.
著者
平 英彰 寺西 秀豊 劒田 幸子
出版者
一般社団法人 日本アレルギー学会
雑誌
アレルギー
巻号頁・発行日
vol.41, no.10, pp.1466-1471, 1992
被引用文献数
7

季節はずれのスギ花粉飛散の現象を明らかにするため, スギ空中花粉の調査を3年間にわたって行うと共に, 10月及び11月におけるスギ雄花の開花条件を検討した. 7月上旬から9月下旬にかけて形成されたスギ雄花から飛散したと考えられる花粉は10月中旬以降認められた. 10月, 11月に採取した雄花を低温処理したあと6℃から20℃の温度条件下で栽培したところ, ごく限られた特定のスギの雄花は, 10℃以上の高温条件下で容易に開花し花粉を飛散させた. 10月から1月にかけての気温を検討すると, 10℃以上の気温の高い日が多かった. 雄花の開花状況は, すべての雄花がいっせいに開花し, 花粉を飛散するのではなく, 全雄花のおよそ1/3程度が開花するだけで, 同じ房の中でも全く開花しない雄花もあり, 枝によっても開花状況が異っていた. したがって, これらの時期に飛散するスギ花粉の濃度は低いが, 豊作年では局所的に高い濃度を示す地域もあると推定され, アレルギー症状を引き起こす場合もあると考える.
著者
津田 宏治
出版者
一般社団法人電子情報通信学会
雑誌
電子情報通信学会誌 (ISSN:09135693)
巻号頁・発行日
vol.83, no.6, pp.460-466, 2000-06-25
参考文献数
13
被引用文献数
57

サポートベクターマシンとは, 近年注目を集めているパーセプトロン型のパターン認識手法の名前である.この手法は, PAC学習に基づく理論的背景を持ち, 同時に, 実験的に非常に優れた成績を挙げている.また, 学習は, 二次計画問題を解くことによって行うことができ, 局所解の問題も存在しない.サポートベクターマシンは, 本来線形識別器であるが, カーネル関数と組み合わせることによって, 学習の簡便さを失うことなく, 非線形に容易に拡張できる.本稿では, パターン認識研究における久しぶりの大型新人であるサポートベクターマシンについて, 応用の研究者を意識して, 計算機上での実現法を中心に述べる.また, 理論的背景についても, 簡潔に解説する.
著者
神谷 拓 伊藤 嘉人 玉腰 和典
出版者
宮城教育大学
雑誌
宮城教育大学紀要 (ISSN:13461621)
巻号頁・発行日
vol.47, pp.163-185, 2012

本研究の目的は、東日本大震災後に開催された運動会のフィールドワークを通して、学校の統廃合をめぐる教師、生徒、地域住民の「意志」について明らかにすることである。対象としたのは、同震災によって甚大な被害を受けた、M県の沿岸部に位置するH市のN2中学校で開催された「親子大運動会」である。調査の結果、この運動会において、教師、生徒、地域住民の「意志」は緩やかに繋がっていたものの、生徒たちの「統廃合を受け入れるまでには至っていない」という「意志」が、他の立場では共有されていないことが明らかになった。このことにより、本研究では「親子大運動会」が、教師、生徒、地域住民の「連帯と団結による意志表明」の場には「ならなかった」と結論づけた。とりわけ、27.3%の生徒が「私たちの意見も聞いて欲しかった」と述べていることから、日常生活における「意志表明の場」(子どもの意見表明権)を回復していくことが、今後の「親子大運動会」、及び、地域復興の課題になるだろう。
著者
師 茂樹
出版者
好文出版
雑誌
漢字文献情報処理研究
巻号頁・発行日
no.15, pp.97-99, 2014-10
著者
五十嵐 沙千子
出版者
東海大学
雑誌
東海大学紀要 文学部 (ISSN:05636760)
巻号頁・発行日
vol.84, pp.176-155, 2005

Das ist bemerkenswert, dass M. J. Sandel, der Vertreter des Kommunitar-ianismus, den Liberalismus von John Rawls sehr hart kritisiert hat. Die Aufgabe der vorliegenden Untersuchung ist, die Moglichkeit der Freiheit im Liberalismus durch Sandels Kritik an Rawls nochmals zu uberprufen, und die Spannungen zwischen >Offentlichkeit< und >Gemeinschaft< klarzumachen. Dem Anschein nach sind >Offentlichkeit< und >Gemeinschaft< einander sehr ahnlich. Diese zwei Begriffe sind aber wirklich ganz widerspruchlich. Ich habe aus den Spannungen erklart, dass der Rahmen der Gerechtigkeit sowohl im Liberalismus als im Kommunitarianismus Grenze hat.
著者
李 楓
出版者
一般社団法人電子情報通信学会
雑誌
電子情報通信学会技術研究報告. TL, 思考と言語 (ISSN:09135685)
巻号頁・発行日
vol.112, no.339, pp.53-58, 2012-12-01

語彙調査は,通例,語彙の量的な構成や使用の実態を調べるために行う.広義の日本語の語彙調査には,日本語母語話者が産出する日本語を対象とするものと,学習者向けに書かれた日本語教科書などを対象とするものが含まれる.前者は日本語学に,後者は日本語教育に資するものであるが,両者を組み合わせて分析することにより,既存の日本語教科書の語彙の妥当性を客観的観点から評価することが可能である.本研究では,中国で使用されている日本語教科書と,文学作品や新聞記事などの,広く読まれている日本語をそれぞれ収集してコーパス化し,比較を行った.量的分析の結果,一般的な日本語に比べ,中国人学習者向けの日本語教科書では,語彙の多様性が限定的で,周縁的品詞に偏っており,高頻度語の占有率が高く,内容的には,より話し言葉的であることが明らかになった.この結果は中国における日本語教科書の課題を示唆するものと言えるだろう.
著者
池田 昌代 加藤 みゆき 長野 宏子 阿久澤 さゆり 大森 正司
出版者
日本家政学会
雑誌
日本家政学会誌 = Journal of home economics of Japan (ISSN:09135227)
巻号頁・発行日
vol.54, no.4, pp.263-269, 2003-04-15
参考文献数
23
被引用文献数
4

ミャンマーの発酵米麺モヒンガーの成分上の特徴及び,製造工程における微生物相を検討し次のような結果を得た。(1)発酵米麺製造工程には,Bacillus属,Lactobacillus属, Streptococcus属, yeast,moldsが普遍的の存在していた。(2)発酵米麺の一般成分は原料米と比較し,水分,タンパク質,脂肪,灰分,全てにおいて低い値であった。また有機酸は,原料米で見られたクエン酸,フマル酸,シュウ酸が減少し,新たに乳酸が生成されていた。(3)発酵米麺の遊離アミノ酸は,原料米と比較して増加していた。また,発酵米麺からタンパク質を抽出し,電気泳動でタンパク質泳動パターンを観察したところ、原料米の時に見られた20kDa以上のタンパク質が消失していた。さらに14.3kDa付近のバンドが薄くなり,6.5kDa以下の低分子のバンドが増加していた。このことから発酵による米タンパク質の低分子かが明らかになった。
著者
早稲田 一嘉 尾崎 元泰 西田 真之
出版者
神戸市立工業高等専門学校
雑誌
研究紀要 (ISSN:09101160)
巻号頁・発行日
vol.44, pp.55-60, 2006-03-01
被引用文献数
1

Recently, a social problem of the decrease of students' interest in science is highlighted in Japanese industrial education fields. Therefore, the creative manufacturing technique is seen in a fresh light in increasing. The summer open seminar for elementary and junior high school student was open in Kobe City College of Technology form Jul. to Aug. in 2005. In this seminar, the six courses were opened and lectured by each teacher. The all teachers would like to teach to students the special field of themselves and give pleaser to make a creative something. Our material-group in department to mechanical engineering was open the one seminar course on metal material field in Jul. 26-27, 2005. This metal material, especially mechanical engineering field, is understood such as quiet fields in many students. Then we would like to try to make some active experimental and to make a good impression to students. After several discussions, we decide the subject of casting technique in metal material. In this performance, the molten Iron was caste into molds in student presence. Students made also some accessories from tin casting by themselves.