出版者
日経BP社
雑誌
日経systems (ISSN:18811620)
巻号頁・発行日
no.220, pp.24-31, 2011-08

PART1で見てきたように、データの不備に直面し、その解決に取り組む現場は多い。マスターデータの統合に詳しいインフォテリアの油野達也氏(執行役員 エンタープライズ事業部長 西日本事業所長)は「以前は一部の先行企業が顧客マスターの整備に取り組んでいたが、最近は汚れたデータが社内に蔓延して業務が回らないという理由で、データの不備を解消する企業が増えている」と指摘す…
著者
井下田 久幸
出版者
社団法人情報科学技術協会
雑誌
情報の科学と技術 (ISSN:09133801)
巻号頁・発行日
vol.52, no.8, pp.410-417, 2002-08-01

XMLと並んで有望かつ実用的な規格にXSLTがある。XSLTは,企業間におけるデータ交換において,微妙に異なる語彙やデータ構造の違いを吸収することができる変換の機能を有している。しかし実際のユーザーの環境では,さらに柔軟な変換機能や,より高速な変換を必要とする局面もあり,必ずしもXSLTが全ての解決策とはなっていない。XMLの利点と短所をよく理解して活用していくことが重要である。またXMLの本質は,人間を介在せずシステム間で直接データ交換を行うことにある。そのためXMLをプログラムで操作できるためのインターフェイスも,XMLを実用的に利用する上で重要なポイントになっている。
著者
蒲生 容仁 島田 彌
出版者
Japanese Society for Engineering Education
雑誌
工業教育 (ISSN:18839002)
巻号頁・発行日
vol.40, no.4, pp.124-131, 1992

近年,企業は技術革新による産業構造・社会構造の急激な変化への対応,および環境保全を始めとする,社会の地球規模での調和と永続への貢献を強く求められている。これに対応するため,各企業とも,高度かつ広範な技術と,広い視野を持った技術者の育成に注力しており,また教育の産学協力のあり方についても,官民共同で検討が進められている。<BR>本稿では,筆者等の企業内教育,および大学での非常勤講師の経験から見た,若者の特徴の把握をべースにして,企業における技術者教育の現状と,とくに技術者の自発的意欲の喚起に注目した今後の課題について記述する。併せて,大学等による技術者教育に対する期待についても述べることにする。
著者
平野 洋一郎
出版者
一般社団法人情報処理学会
雑誌
情報処理学会研究報告デジタルドキュメント(DD) (ISSN:09196072)
巻号頁・発行日
vol.1999, no.25, pp.17-24, 1999-03-12
被引用文献数
1

XML (eXtensible Markup Language)の応用として最も注目されている分野の1つが、企業間データ交換(EDI)への適用である。従来、EDIは大企業を中心に専用VAN上で展開されてきたが、インターネットの爆発的な普及に伴い、インターネットベースの安価で先進的なEDI(=インターネットEDI)導入の機運が高まっている。XMLは、このインターネットEDI上で扱うデータ形式として注目され、研究や試験導入が進んでいる。また一方では、XML化にあたっての課題も明らかになりつつある。本稿では、XMLのEDIへの応用の動向を探り、今後の方向性および課題について述べる。The XML/EDI is XML (eXtensible Markup Language) based Enterprise Data Interchange over the Internet. Since the exploding worldwide penetration of the Internet, the demand for using Internet as the transmission wire of the EDI is emerging. XML is the ideal data format for internet-based EDI system because of the suitability to the established and leading edge Web technology and the extensibility of the language syntax.

1 0 0 0 OA 官報

著者
大蔵省印刷局 [編]
出版者
日本マイクロ写真
巻号頁・発行日
vol.1884年03月07日, 1884-03-07
著者
中山 志郎 堺 幹太 疋田 善平 服部 譲 三宅 儀 古田 睦広 井谷 舜郎 星野 孝
出版者
一般社団法人 日本血液学会
雑誌
臨床血液 (ISSN:04851439)
巻号頁・発行日
vol.11, no.6, pp.687-696, 1970 (Released:2008-10-31)
参考文献数
32
被引用文献数
7

This report deals with our recent observations on 3 cases of atypical acute leukemia difficult to differentiate from aplastic anemia. They were all males, over 60 years old and had lack of definite signs of acute leukemia in their clinical pictures. Onset was insidious, clinical course was mild and prolonged, and physical examinations were unremarkable except for pallor.Examinations of the blood showed marked pancytopenia with few or no immature cells. Aspirated bone marrow specimens were markedly hypocellular with an infiltration of a small number of blast cells which were characterized by bizzare shape, negative peroxidase reaction and prominent nucleoli and were barely identifiable as myeloblast by the phase contrast microscopical findings.Chromosomal analysis of cultured peripheral leukocytes disclosed many aneuploid cells including few of 21-Trisomy in 2 cases.Anemia remained refractory to various therapies, but blood transfusions and administration of prednisolone made the patients' general condition improved.One case died of unknown cause suddenly after blood transfusion. The principal anatomical findings of this case were bone marrow hypoplasia and mild infiltrations of immature cells in the bone marrow, lymphnodes, spleen and liver.It is widely known that the clinical picture and course of malignant tumors in aged persons are somewhat different from those in younger people. On this aspect, characteristics of acute leukemia in advanced age group are discussed mainly in association with changes in the immunobiologic capabilities and in the functions of endocrine organs.
著者
吉村 信吉
出版者
The Association of Japanese Geographers
雑誌
地理学評論 (ISSN:00167444)
巻号頁・発行日
vol.16, no.4, pp.249-264, 1940-04-01 (Released:2008-12-24)
参考文献数
14
被引用文献数
1

1.東京市杉並區の西,妙正寺川,善幅寺川上流間の臺地に淺井帶があり,地下水面が扁平ではあるが塚状に盛上つてゐて,地下水堆と考へられる。 2.地下水堆は長さ3.5km,幅1.1kmに達し,武藏野臺地に於ては最大である。地下水の動水傾斜は所々稍〓大きくなつてゐるが,地下水瀑布線附近の地下水面のそれに比し著しく小さい。 3.地下水堆は地形から云つて地下水の流出が少い上に厚くローム層下部に粘土層が存在するから生じたものである。 4.聚落發生との間には關係があるらしいが,現在の所證するに足る資料は得られてゐない。
著者
持永静代
雑誌
看護教育
巻号頁・発行日
vol.27, no.9, pp.566-571, 1986
被引用文献数
1

1 0 0 0 OA 圖書編127卷

著者
明章撰
出版者
[出版者不明]
巻号頁・発行日
vol.[45], 1613
著者
井上 誠 東 泰助 小野木 伯薫 横田 勝 村田 安規 中平 敦
出版者
Japan Society of Powder and Powder Metallurgy
雑誌
粉体および粉末冶金 (ISSN:05328799)
巻号頁・発行日
vol.58, no.7, pp.407-411, 2011-07-15
参考文献数
8

We have developed the Ag-Cu-Sn-Ni quaternary brazing filler metal having a low melting point, a high strength and a high ductility. Then, we produced wire saws composed of Ni-coated SUS304 wires, on which diamond abrasives are fixed with this brazing filler metal. We tried to slice the Si ingots using this wire saw. Good results were obtained for the application to the production of silicon wafers for solar cells. Accordingly, we focused on the basic experiments for further performance of the fixed abrasive diamond wire saws, leading to low cost of slicing technique of hard materials such as silicon and sapphire. In particular, we examined wettability, interfacial reaction and joint strength between Ag-Cu-Sn-Ni quaternary brazing filler metal and industrial metal plates such as Cu, Ni or flux coated SUS304.
著者
東 泰助 井上 誠 小野木 伯薫 横田 勝 村田 安規 中平 敦
出版者
The Society of Materials Science, Japan
雑誌
材料 (ISSN:05145163)
巻号頁・発行日
vol.59, no.6, pp.418-422, 2010
被引用文献数
3 1

The development of low melting temperature coating materials for brazing diamonds was attempted for diamonds wire saw for slicing single crystal silicon.The diamonds wire saw was made by brazing diamonds on SUS-304 wire with high strength for the sawing equipments. Since the degradation of SUS-304 wire was generally generated at higher temperature over 600°C, the high performance coating materials, composed of 47.5 wt.%Ag-25.5 wt.%Cu-27.0 wt.%Sn based materials, was developed by addition of Ni into them to improve the brittleness for SUS-304 wire. These results suggested that the coating material of (47.5 wt.%Ag-25.5 wt.%Cu-27.0 wt.%Sn)-1 wt.%Ni was the suitable brazing of the diamonds SUS-304 wire for sawing equipments.